Gecko [ betsfootball.net ]

Name	Size	Permission	Date
X11	[ DIR ]	drwxr-xr-x	2025-10-09 10:16
[	66.89 KB	-rwxr-xr-x	2022-09-20 15:27
aa-enabled	18.23 KB	-rwxr-xr-x	2023-02-14 11:49
aa-exec	18.23 KB	-rwxr-xr-x	2023-02-14 11:49
aa-features-abi	18.23 KB	-rwxr-xr-x	2023-02-14 11:49
ab	58.42 KB	-rwxr-xr-x	2024-10-04 15:21
aclocal	35.18 KB	-rwxr-xr-x	2022-03-18 13:09
aclocal-1.16	35.18 KB	-rwxr-xr-x	2022-03-18 13:09
add-apt-repository	14.1 KB	-rwxr-xr-x	2024-05-17 12:23
addpart	30.31 KB	-rwxr-xr-x	2024-11-21 20:01
addr2line	23.14 KB	-rwxr-xr-x	2023-01-14 17:24
appstreamcli	128.12 KB	-rwxr-xr-x	2023-05-28 15:10
apropos	51.29 KB	-rwxr-xr-x	2023-03-12 22:23
apt	18.31 KB	-rwxr-xr-x	2023-05-25 14:11
apt-add-repository	14.1 KB	-rwxr-xr-x	2024-05-17 12:23
apt-cache	86.38 KB	-rwxr-xr-x	2023-05-25 14:11
apt-cdrom	22.38 KB	-rwxr-xr-x	2023-05-25 14:11
apt-config	26.31 KB	-rwxr-xr-x	2023-05-25 14:11
apt-extracttemplates	22.39 KB	-rwxr-xr-x	2023-05-25 14:11
apt-ftparchive	270.39 KB	-rwxr-xr-x	2023-05-25 14:11
apt-get	50.38 KB	-rwxr-xr-x	2023-05-25 14:11
apt-key	27.32 KB	-rwxr-xr-x	2023-05-25 14:11
apt-listchanges	11.96 KB	-rwxr-xr-x	2021-03-28 11:06
apt-mark	58.38 KB	-rwxr-xr-x	2023-05-25 14:11
apt-sortpkgs	38.32 KB	-rwxr-xr-x	2023-05-25 14:11
ar	51.17 KB	-rwxr-xr-x	2023-01-14 17:24
arch	42.86 KB	-rwxr-xr-x	2022-09-20 15:27
aria_chk	5.49 MB	-rwxr-xr-x	2025-02-19 00:56
aria_dump_log	5.29 MB	-rwxr-xr-x	2025-02-19 00:56
aria_ftdump	5.3 MB	-rwxr-xr-x	2025-02-19 00:56
aria_pack	5.33 MB	-rwxr-xr-x	2025-02-19 00:56
aria_read_log	5.44 MB	-rwxr-xr-x	2025-02-19 00:56
as	897.41 KB	-rwxr-xr-x	2023-01-14 17:24
autoconf	14.85 KB	-rwxr-xr-x	2023-01-14 17:42
autoheader	8.82 KB	-rwxr-xr-x	2023-01-14 17:42
autom4te	32.69 KB	-rwxr-xr-x	2023-01-14 17:42
automake	255.91 KB	-rwxr-xr-x	2022-03-18 13:09
automake-1.16	255.91 KB	-rwxr-xr-x	2022-03-18 13:09
autopoint	26.38 KB	-rwxr-xr-x	2023-02-26 15:20
autoreconf	26.3 KB	-rwxr-xr-x	2023-01-14 17:42
autoscan	16.77 KB	-rwxr-xr-x	2023-01-14 17:42
autoupdate	33.22 KB	-rwxr-xr-x	2023-01-14 17:42
awk	696.44 KB	-rwxr-xr-x	2023-02-19 13:30
b2sum	58.98 KB	-rwxr-xr-x	2022-09-20 15:27
base32	46.89 KB	-rwxr-xr-x	2022-09-20 15:27
base64	46.89 KB	-rwxr-xr-x	2022-09-20 15:27
basename	42.83 KB	-rwxr-xr-x	2022-09-20 15:27
basenc	54.89 KB	-rwxr-xr-x	2022-09-20 15:27
bash	1.21 MB	-rwxr-xr-x	2024-03-29 19:40
bashbug	6.7 KB	-rwxr-xr-x	2024-03-29 19:40
bsondump	11.03 MB	-rwxr-xr-x	2025-04-01 15:22
buildhash	46.63 KB	-rwxr-xr-x	2022-03-29 18:19
bunzip2	38.3 KB	-rwxr-xr-x	2022-09-19 02:54
busctl	90.5 KB	-rwxr-xr-x	2025-03-06 14:56
busybox	754.77 KB	-rwxr-xr-x	2023-04-23 21:24
bzcat	38.3 KB	-rwxr-xr-x	2022-09-19 02:54
bzcmp	2.17 KB	-rwxr-xr-x	2022-09-19 02:54
bzdiff	2.17 KB	-rwxr-xr-x	2022-09-19 02:54
bzegrep	3.69 KB	-rwxr-xr-x	2022-09-19 02:54
bzexe	4.78 KB	-rwxr-xr-x	2021-11-27 12:25
bzfgrep	3.69 KB	-rwxr-xr-x	2022-09-19 02:54
bzgrep	3.69 KB	-rwxr-xr-x	2022-09-19 02:54
bzip2	38.3 KB	-rwxr-xr-x	2022-09-19 02:54
bzip2recover	14.23 KB	-rwxr-xr-x	2022-09-19 02:54
bzless	1.27 KB	-rwxr-xr-x	2022-09-19 02:54
bzmore	1.27 KB	-rwxr-xr-x	2022-09-19 02:54
c++	1.25 MB	-rwxr-xr-x	2023-01-08 09:12
c++filt	18.51 KB	-rwxr-xr-x	2023-01-14 17:24
c89	428 B	-rwxr-xr-x	2020-11-17 18:53
c89-gcc	428 B	-rwxr-xr-x	2020-11-17 18:53
c99	454 B	-rwxr-xr-x	2020-11-17 18:53
c99-gcc	454 B	-rwxr-xr-x	2020-11-17 18:53
c_rehash	6.68 KB	-rwxr-xr-x	2024-10-27 14:16
captoinfo	90.34 KB	-rwxr-xr-x	2023-05-07 14:33
cat	42.98 KB	-rwxr-xr-x	2022-09-20 15:27
catman	42.77 KB	-rwxr-xr-x	2023-03-12 22:23
cc	1.24 MB	-rwxr-xr-x	2023-01-08 09:12
certbot	958 B	-rwxr-xr-x	2023-04-16 05:22
cgi-fcgi	18 KB	-rwxr-xr-x	2021-01-11 05:57
chage	78.49 KB	-rwxr-sr-x	2023-03-23 12:40
chardet	221 B	-rwxr-xr-x	2022-12-26 14:42
chardetect	221 B	-rwxr-xr-x	2022-12-26 14:42
chattr	14.24 KB	-rwxr-xr-x	2023-03-05 03:16
chcon	67.11 KB	-rwxr-xr-x	2022-09-20 15:27
checkgid	14.23 KB	-rwxr-xr-x	2024-10-04 15:21
chfn	61.2 KB	-rwsr-xr-x	2023-03-23 12:40
chgrp	67.05 KB	-rwxr-xr-x	2022-09-20 15:27
chmod	62.98 KB	-rwxr-xr-x	2022-09-20 15:27
choom	54.31 KB	-rwxr-xr-x	2024-11-21 20:01
chown	71.05 KB	-rwxr-xr-x	2022-09-20 15:27
chrt	66.31 KB	-rwxr-xr-x	2024-11-21 20:01
chsh	51.64 KB	-rwsr-xr-x	2023-03-23 12:40
chvt	14.57 KB	-rwxr-xr-x	2023-03-23 09:34
ckbcomp	147.14 KB	-rwxr-xr-x	2023-05-21 21:30
cksum	139.05 KB	-rwxr-xr-x	2022-09-20 15:27
clear	14.24 KB	-rwxr-xr-x	2023-05-07 14:33
clear_console	14.15 KB	-rwxr-xr-x	2024-03-29 19:40
cmp	50.95 KB	-rwxr-xr-x	2023-02-03 19:00
codepage	14.41 KB	-rwxr-xr-x	2023-03-23 09:34
col	34.31 KB	-rwxr-xr-x	2024-11-21 20:01
colcrt	14.31 KB	-rwxr-xr-x	2024-11-21 20:01
colrm	30.31 KB	-rwxr-xr-x	2024-11-21 20:01
column	54.31 KB	-rwxr-xr-x	2024-11-21 20:01
comm	46.92 KB	-rwxr-xr-x	2022-09-20 15:27
compose	18.06 KB	-rwxr-xr-x	2021-11-29 13:07
corelist	15.01 KB	-rwxr-xr-x	2023-11-25 20:59
corepack	132 B	-rwxr-xr-x	2024-02-26 06:00
cp	147.61 KB	-rwxr-xr-x	2022-09-20 15:27
cpan	8.16 KB	-rwxr-xr-x	2023-11-25 20:59
cpan5.36-x86_64-linux-gnu	8.18 KB	-rwxr-xr-x	2023-11-25 20:59
cpio	158.56 KB	-rwxr-xr-x	2022-09-14 19:45
cpio-filter	1.22 KB	-rwxr-xr-x	2022-11-19 21:25
cpp	1.24 MB	-rwxr-xr-x	2023-01-08 09:12
cpp-12	1.24 MB	-rwxr-xr-x	2023-01-08 09:12
crc32	1.04 KB	-rwxr-xr-x	2020-03-14 12:52
crontab	42.63 KB	-rwxr-sr-x	2023-03-02 07:33
csplit	119.17 KB	-rwxr-xr-x	2022-09-20 15:27
ctstat	26.59 KB	-rwxr-xr-x	2023-05-22 13:19
curl	274.22 KB	-rwxr-xr-x	2025-03-09 10:45
cut	46.98 KB	-rwxr-xr-x	2022-09-20 15:27
cvtsudoers	337.19 KB	-rwxr-xr-x	2023-06-27 11:45
dash	122.7 KB	-rwxr-xr-x	2023-01-05 13:20
date	119.05 KB	-rwxr-xr-x	2022-09-20 15:27
dbilogstrip	1.35 KB	-rwxr-xr-x	2022-11-19 21:14
dbiprof	6.06 KB	-rwxr-xr-x	2022-11-19 21:14
dbiproxy	5.27 KB	-rwxr-xr-x	2022-11-19 21:14
dbus-cleanup-sockets	14.22 KB	-rwxr-xr-x	2023-09-16 10:03
dbus-daemon	238.56 KB	-rwxr-xr-x	2023-09-16 10:03
dbus-monitor	26.23 KB	-rwxr-xr-x	2023-09-16 10:03
dbus-run-session	14.23 KB	-rwxr-xr-x	2023-09-16 10:03
dbus-send	30.22 KB	-rwxr-xr-x	2023-09-16 10:03
dbus-update-activation-environment	14.22 KB	-rwxr-xr-x	2023-09-16 10:03
dbus-uuidgen	14.22 KB	-rwxr-xr-x	2023-09-16 10:03
dd	87.15 KB	-rwxr-xr-x	2022-09-20 15:27
deallocvt	14.53 KB	-rwxr-xr-x	2023-03-23 09:34
deb-systemd-helper	23.79 KB	-rwxr-xr-x	2022-07-09 00:05
deb-systemd-invoke	6.09 KB	-rwxr-xr-x	2022-07-02 15:23
debconf	2.79 KB	-rwxr-xr-x	2023-01-08 21:50
debconf-apt-progress	11.27 KB	-rwxr-xr-x	2023-01-08 21:50
debconf-communicate	608 B	-rwxr-xr-x	2023-01-08 21:50
debconf-copydb	1.68 KB	-rwxr-xr-x	2023-01-08 21:50
debconf-escape	647 B	-rwxr-xr-x	2023-01-08 21:50
debconf-gettextize	15.97 KB	-rwxr-xr-x	2020-12-30 01:09
debconf-set-selections	2.92 KB	-rwxr-xr-x	2023-01-08 21:50
debconf-show	1.78 KB	-rwxr-xr-x	2023-01-08 21:50
debconf-updatepo	4.46 KB	-rwxr-xr-x	2020-12-30 01:09
debianbts	217 B	-rwxr-xr-x	2022-12-08 11:34
defmt-c	14.23 KB	-rwxr-xr-x	2022-03-29 18:19
defmt-sh	14.23 KB	-rwxr-xr-x	2022-03-29 18:19
delpart	30.31 KB	-rwxr-xr-x	2024-11-21 20:01
delv	41.3 KB	-rwxr-xr-x	2025-01-25 10:14
df	99.8 KB	-rwxr-xr-x	2022-09-20 15:27
dh	28.85 KB	-rwxr-xr-x	2023-01-02 14:54
dh_assistant	20.34 KB	-rwxr-xr-x	2023-01-02 14:54
dh_auto_build	1.37 KB	-rwxr-xr-x	2023-01-02 14:54
dh_auto_clean	1.51 KB	-rwxr-xr-x	2023-01-02 14:54
dh_auto_configure	1.63 KB	-rwxr-xr-x	2023-01-02 14:54
dh_auto_install	3.22 KB	-rwxr-xr-x	2023-01-02 14:54
dh_auto_test	1.65 KB	-rwxr-xr-x	2023-01-02 14:54
dh_autoreconf	6.46 KB	-rwxr-xr-x	2021-02-04 11:26
dh_autoreconf_clean	2.1 KB	-rwxr-xr-x	2021-02-04 11:26
dh_autotools-dev_restoreconfig	1.79 KB	-rwxr-xr-x	2022-01-31 14:43
dh_autotools-dev_updateconfig	1.81 KB	-rwxr-xr-x	2022-01-31 14:43
dh_bash-completion	4.31 KB	-rwxr-xr-x	2021-08-28 15:26
dh_bugfiles	3.58 KB	-rwxr-xr-x	2023-01-02 14:54
dh_builddeb	4.79 KB	-rwxr-xr-x	2023-01-02 14:54
dh_clean	5.03 KB	-rwxr-xr-x	2023-01-02 14:54
dh_compress	7.67 KB	-rwxr-xr-x	2023-01-02 14:54
dh_dwz	4.99 KB	-rwxr-xr-x	2023-01-02 14:54
dh_fixperms	5.29 KB	-rwxr-xr-x	2023-01-02 14:54
dh_gencontrol	5.88 KB	-rwxr-xr-x	2023-01-02 14:54
dh_icons	2.04 KB	-rwxr-xr-x	2023-01-02 14:54
dh_install	12.16 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installalternatives	6.61 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installcatalogs	3.33 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installchangelogs	11.57 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installcron	1.65 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installdeb	12.71 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installdebconf	6.69 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installdirs	3.09 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installdocs	14.65 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installemacsen	3.74 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installexamples	5.65 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installgsettings	2.24 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installifupdown	1.47 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installinfo	3.38 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installinit	13.96 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installinitramfs	2.5 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installlogcheck	1.94 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installlogrotate	1.14 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installman	13.37 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installmanpages	4.89 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installmenu	2.15 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installmime	1.3 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installmodules	2.66 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installpam	1.42 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installppp	1.38 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installsystemd	14.06 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installsystemduser	8.36 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installsysusers	2.98 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installtmpfiles	3.24 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installudev	2.1 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installwm	3.3 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installxfonts	2.8 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installxmlcatalogs	9.22 KB	-rwxr-xr-x	2019-02-27 00:18
dh_link	4.32 KB	-rwxr-xr-x	2023-01-02 14:54
dh_lintian	1.29 KB	-rwxr-xr-x	2023-01-02 14:54
dh_listpackages	825 B	-rwxr-xr-x	2023-01-02 14:54
dh_makeshlibs	15.12 KB	-rwxr-xr-x	2023-01-02 14:54
dh_md5sums	3.46 KB	-rwxr-xr-x	2023-01-02 14:54
dh_missing	8.75 KB	-rwxr-xr-x	2023-01-02 14:54
dh_movefiles	4.69 KB	-rwxr-xr-x	2023-01-02 14:54
dh_perl	5.03 KB	-rwxr-xr-x	2023-01-02 14:54
dh_perl_dbi	1.17 KB	-rwxr-xr-x	2022-11-19 21:14
dh_phpcomposer	3.01 KB	-rwxr-xr-x	2023-01-28 15:13
dh_phppear	5.63 KB	-rwxr-xr-x	2023-01-28 15:13
dh_prep	1.87 KB	-rwxr-xr-x	2023-01-02 14:54
dh_shlibdeps	6.24 KB	-rwxr-xr-x	2023-01-02 14:54
dh_strip	14.85 KB	-rwxr-xr-x	2023-01-02 14:54
dh_strip_nondeterminism	3.12 KB	-rwxr-xr-x	2023-01-15 19:53
dh_systemd_enable	8.98 KB	-rwxr-xr-x	2023-01-02 14:54
dh_systemd_start	8.57 KB	-rwxr-xr-x	2023-01-02 14:54
dh_testdir	1.31 KB	-rwxr-xr-x	2023-01-02 14:54
dh_testroot	2.91 KB	-rwxr-xr-x	2023-01-02 14:54
dh_ucf	2.38 KB	-rwxr-xr-x	2023-01-02 14:54
dh_update_autotools_config	1.84 KB	-rwxr-xr-x	2023-01-02 14:54
dh_usrlocal	4.2 KB	-rwxr-xr-x	2023-01-02 14:54
diff	151.58 KB	-rwxr-xr-x	2023-02-03 19:00
diff3	67.14 KB	-rwxr-xr-x	2023-02-03 19:00
dig	138.77 KB	-rwxr-xr-x	2025-01-25 10:14
dir	147.8 KB	-rwxr-xr-x	2022-09-20 15:27
dircolors	50.92 KB	-rwxr-xr-x	2022-09-20 15:27
dirmngr	586.13 KB	-rwxr-xr-x	2023-03-26 13:03
dirmngr-client	106.87 KB	-rwxr-xr-x	2023-03-26 13:03
dirname	38.83 KB	-rwxr-xr-x	2022-09-20 15:27
discover-config	2.87 KB	-rwxr-xr-x	2022-01-09 07:48
dmesg	86.58 KB	-rwxr-xr-x	2024-11-21 20:01
dnsdomainname	22.15 KB	-rwxr-xr-x	2022-12-19 13:33
dnstap-read	18.33 KB	-rwxr-xr-x	2025-01-25 10:14
domainname	22.15 KB	-rwxr-xr-x	2022-12-19 13:33
dotlockfile	22.5 KB	-rwxr-sr-x	2021-02-04 15:18
dpkg	310.64 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-architecture	14.85 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-buildflags	8.14 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-buildpackage	32.63 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-checkbuilddeps	7.45 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-deb	166.52 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-distaddfile	2.72 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-divert	154.55 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-genbuildinfo	18.48 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-genchanges	17.39 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-gencontrol	14.2 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-gensymbols	10.65 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-maintscript-helper	20.71 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-mergechangelogs	8.88 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-name	6.62 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-parsechangelog	4.83 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-query	158.58 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-realpath	4.09 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-scanpackages	8.47 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-scansources	8.98 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-shlibdeps	31.17 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-source	22.91 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-split	126.48 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-statoverride	62.33 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-trigger	86.48 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-vendor	3.18 KB	-rwxr-xr-x	2023-05-11 02:04
du	171.33 KB	-rwxr-xr-x	2022-09-20 15:27
dumpkeys	175.13 KB	-rwxr-xr-x	2023-03-23 09:34
dwp	1.79 MB	-rwxr-xr-x	2023-01-14 17:24
dwz	237.66 KB	-rwxr-xr-x	2022-12-26 10:45
echo	42.83 KB	-rwxr-xr-x	2022-09-20 15:27
edit	18.06 KB	-rwxr-xr-x	2021-11-29 13:07
editor	280.74 KB	-rwxr-xr-x	2024-05-06 06:10
egrep	41 B	-rwxr-xr-x	2023-01-24 14:43
eject	82.16 KB	-rwxr-xr-x	2024-11-21 20:01
elfedit	35.03 KB	-rwxr-xr-x	2023-01-14 17:24
enc2xs	40.96 KB	-rwxr-xr-x	2023-11-25 20:59
encguess	3 KB	-rwxr-xr-x	2023-11-25 20:59
env	47.4 KB	-rwxr-xr-x	2022-09-20 15:27
envsubst	34.31 KB	-rwxr-xr-x	2023-02-26 15:20
eqn	205.42 KB	-rwxr-xr-x	2023-03-07 09:38
ex	1.55 MB	-rwxr-xr-x	2025-02-16 05:23
expand	42.92 KB	-rwxr-xr-x	2022-09-20 15:27
expiry	30.45 KB	-rwxr-sr-x	2023-03-23 12:40
expr	115.05 KB	-rwxr-xr-x	2022-09-20 15:27
factor	83.2 KB	-rwxr-xr-x	2022-09-20 15:27
faillog	22.53 KB	-rwxr-xr-x	2023-03-23 12:40
faked-sysv	34.76 KB	-rwxr-xr-x	2023-03-18 09:22
faked-tcp	34.78 KB	-rwxr-xr-x	2023-03-18 09:22
fakeroot	3.9 KB	-rwxr-xr-x	2023-03-18 09:22
fakeroot-sysv	3.9 KB	-rwxr-xr-x	2023-03-18 09:22
fakeroot-tcp	3.9 KB	-rwxr-xr-x	2023-03-18 09:22
fallocate	34.31 KB	-rwxr-xr-x	2024-11-21 20:01
false	34.83 KB	-rwxr-xr-x	2022-09-20 15:27
fc-cache	18.59 KB	-rwxr-xr-x	2023-01-31 22:24
fc-cat	18.52 KB	-rwxr-xr-x	2023-01-31 22:24
fc-conflist	14.34 KB	-rwxr-xr-x	2023-01-31 22:24
fc-list	14.4 KB	-rwxr-xr-x	2023-01-31 22:24
fc-match	14.47 KB	-rwxr-xr-x	2023-01-31 22:24
fc-pattern	14.39 KB	-rwxr-xr-x	2023-01-31 22:24
fc-query	14.36 KB	-rwxr-xr-x	2023-01-31 22:24
fc-scan	14.42 KB	-rwxr-xr-x	2023-01-31 22:24
fc-validate	14.41 KB	-rwxr-xr-x	2023-01-31 22:24
fcgistarter	14.23 KB	-rwxr-xr-x	2024-10-04 15:21
fgconsole	14.52 KB	-rwxr-xr-x	2023-03-23 09:34
fgrep	41 B	-rwxr-xr-x	2023-01-24 14:43
filan	96.02 KB	-rwxr-xr-x	2022-11-06 08:15
file	26.48 KB	-rwxr-xr-x	2023-01-28 18:17
fincore	34.36 KB	-rwxr-xr-x	2024-11-21 20:01
find	219.58 KB	-rwxr-xr-x	2023-01-08 18:07
findaffix	11.74 KB	-rwxr-xr-x	2022-03-29 18:19
findmnt	83.59 KB	-rwxr-xr-x	2024-11-21 20:01
flock	34.39 KB	-rwxr-xr-x	2024-11-21 20:01
fmt	46.89 KB	-rwxr-xr-x	2022-09-20 15:27
fold	42.89 KB	-rwxr-xr-x	2022-09-20 15:27
free	26.3 KB	-rwxr-xr-x	2022-12-19 06:06
funzip	22.46 KB	-rwxr-xr-x	2023-02-19 18:02
fuser	39.83 KB	-rwxr-xr-x	2022-12-13 05:27
g++	1.25 MB	-rwxr-xr-x	2023-01-08 09:12
g++-12	1.25 MB	-rwxr-xr-x	2023-01-08 09:12
galera_new_cluster	917 B	-rwxr-xr-x	2025-02-19 00:56
galera_recovery	3.29 KB	-rwxr-xr-x	2025-02-19 00:56
gapplication	22.31 KB	-rwxr-xr-x	2024-11-14 09:42
gawk	696.44 KB	-rwxr-xr-x	2023-02-19 13:30
gawkbug	6.54 KB	-rwxr-xr-x	2023-02-19 13:30
gcc	1.24 MB	-rwxr-xr-x	2023-01-08 09:12
gcc-12	1.24 MB	-rwxr-xr-x	2023-01-08 09:12
gcc-ar	34.54 KB	-rwxr-xr-x	2023-01-08 09:12
gcc-ar-12	34.54 KB	-rwxr-xr-x	2023-01-08 09:12
gcc-nm	34.54 KB	-rwxr-xr-x	2023-01-08 09:12
gcc-nm-12	34.54 KB	-rwxr-xr-x	2023-01-08 09:12
gcc-ranlib	34.54 KB	-rwxr-xr-x	2023-01-08 09:12
gcc-ranlib-12	34.54 KB	-rwxr-xr-x	2023-01-08 09:12
gcov	720.16 KB	-rwxr-xr-x	2023-01-08 09:12
gcov-12	720.16 KB	-rwxr-xr-x	2023-01-08 09:12
gcov-dump	568.02 KB	-rwxr-xr-x	2023-01-08 09:12
gcov-dump-12	568.02 KB	-rwxr-xr-x	2023-01-08 09:12
gcov-tool	588.09 KB	-rwxr-xr-x	2023-01-08 09:12
gcov-tool-12	588.09 KB	-rwxr-xr-x	2023-01-08 09:12
gdbus	50.31 KB	-rwxr-xr-x	2024-11-14 09:42
gencat	26.75 KB	-rwxr-xr-x	2025-03-06 22:46
geqn	205.42 KB	-rwxr-xr-x	2023-03-07 09:38
getconf	26.5 KB	-rwxr-xr-x	2025-03-06 22:46
getent	35.47 KB	-rwxr-xr-x	2025-03-06 22:46
getkeycodes	14.53 KB	-rwxr-xr-x	2023-03-23 09:34
getopt	34.31 KB	-rwxr-xr-x	2024-11-21 20:01
gettext	34.31 KB	-rwxr-xr-x	2023-02-26 15:20
gettext.sh	5.07 KB	-rwxr-xr-x	2023-02-26 15:20
gettextize	41.28 KB	-rwxr-xr-x	2023-02-26 15:20
gio	90.33 KB	-rwxr-xr-x	2024-11-14 09:42
gio-querymodules	14.23 KB	-rwxr-xr-x	2024-11-14 09:42
glib-compile-schemas	62.3 KB	-rwxr-xr-x	2024-11-14 09:42
gmake	234.65 KB	-rwxr-xr-x	2021-04-10 13:55
gold	2.99 MB	-rwxr-xr-x	2023-01-14 17:24
gp-archive	159.06 KB	-rwxr-xr-x	2023-01-14 17:24
gp-collect-app	175.27 KB	-rwxr-xr-x	2023-01-14 17:24
gp-display-html	578.29 KB	-rwxr-xr-x	2023-01-14 17:24
gp-display-src	150.81 KB	-rwxr-xr-x	2023-01-14 17:24
gp-display-text	257.3 KB	-rwxr-xr-x	2023-01-14 17:24
gpasswd	86.42 KB	-rwsr-xr-x	2023-03-23 12:40
gpg	1.06 MB	-rwxr-xr-x	2023-03-26 13:03
gpg-agent	425.22 KB	-rwxr-xr-x	2023-03-26 13:03
gpg-connect-agent	154.96 KB	-rwxr-xr-x	2023-03-26 13:03
gpg-wks-server	203 KB	-rwxr-xr-x	2023-03-26 13:03
gpg-zip	3.43 KB	-rwxr-xr-x	2023-03-26 13:03
gpgcompose	910.27 KB	-rwxr-xr-x	2023-03-26 13:03
gpgconf	174.73 KB	-rwxr-xr-x	2023-03-26 13:03
gpgparsemail	34.3 KB	-rwxr-xr-x	2023-03-26 13:03
gpgsm	527.66 KB	-rwxr-xr-x	2023-03-26 13:03
gpgsplit	74.56 KB	-rwxr-xr-x	2023-03-26 13:03
gpgtar	147.52 KB	-rwxr-xr-x	2023-03-26 13:03
gpgv	463 KB	-rwxr-xr-x	2023-03-26 13:03
gpic	220.27 KB	-rwxr-xr-x	2023-03-07 09:38
gprof	108.35 KB	-rwxr-xr-x	2023-01-14 17:24
gprofng	146.59 KB	-rwxr-xr-x	2023-01-14 17:24
grep	198.39 KB	-rwxr-xr-x	2023-01-24 14:43
gresource	22.23 KB	-rwxr-xr-x	2024-11-14 09:42
groff	125.45 KB	-rwxr-xr-x	2023-03-07 09:38
grog	2.71 KB	-rwxr-xr-x	2023-03-07 09:38
grops	185.86 KB	-rwxr-xr-x	2023-03-07 09:38
grotty	137.48 KB	-rwxr-xr-x	2023-03-07 09:38
groups	42.89 KB	-rwxr-xr-x	2022-09-20 15:27
grub-editenv	374.16 KB	-rwxr-xr-x	2023-10-02 14:11
grub-file	809.41 KB	-rwxr-xr-x	2023-10-02 14:11
grub-fstest	931.13 KB	-rwxr-xr-x	2023-10-02 14:11
grub-glue-efi	245.01 KB	-rwxr-xr-x	2023-10-02 14:11
grub-kbdcomp	1.64 KB	-rwxr-xr-x	2023-10-02 14:11
grub-menulst2cfg	229.05 KB	-rwxr-xr-x	2023-10-02 14:11
grub-mkfont	273.66 KB	-rwxr-xr-x	2023-10-02 14:11
grub-mkimage	354.2 KB	-rwxr-xr-x	2023-10-02 14:11
grub-mklayout	249.29 KB	-rwxr-xr-x	2023-10-02 14:11
grub-mknetdir	410.99 KB	-rwxr-xr-x	2023-10-02 14:11
grub-mkpasswd-pbkdf2	257.35 KB	-rwxr-xr-x	2023-10-02 14:11
grub-mkrelpath	244.7 KB	-rwxr-xr-x	2023-10-02 14:11
grub-mkrescue	987.84 KB	-rwxr-xr-x	2023-10-02 14:11
grub-mkstandalone	487.32 KB	-rwxr-xr-x	2023-10-02 14:11
grub-mount	754.05 KB	-rwxr-xr-x	2023-10-02 14:11
grub-ntldr-img	34.58 KB	-rwxr-xr-x	2023-10-02 14:11
grub-render-label	822.01 KB	-rwxr-xr-x	2023-10-02 14:11
grub-script-check	272.82 KB	-rwxr-xr-x	2023-10-02 14:11
grub-syslinux2cfg	770.52 KB	-rwxr-xr-x	2023-10-02 14:11
gsettings	26.31 KB	-rwxr-xr-x	2024-11-14 09:42
gtbl	146.43 KB	-rwxr-xr-x	2023-03-07 09:38
gunzip	2.29 KB	-rwxr-xr-x	2022-04-10 02:22
gzexe	6.3 KB	-rwxr-xr-x	2022-04-10 02:22
gzip	95.84 KB	-rwxr-xr-x	2022-04-10 02:22
h2ph	28.54 KB	-rwxr-xr-x	2023-11-25 20:59
h2xs	59.51 KB	-rwxr-xr-x	2023-11-25 20:59
hardlink	50.39 KB	-rwxr-xr-x	2024-11-21 20:01
hd	58.32 KB	-rwxr-xr-x	2024-11-21 20:01
head	46.95 KB	-rwxr-xr-x	2022-09-20 15:27
helpztags	2.46 KB	-rwxr-xr-x	2025-02-16 05:23
hexdump	58.32 KB	-rwxr-xr-x	2024-11-21 20:01
host	114.7 KB	-rwxr-xr-x	2025-01-25 10:14
hostid	38.83 KB	-rwxr-xr-x	2022-09-20 15:27
hostname	22.15 KB	-rwxr-xr-x	2022-12-19 13:33
hostnamectl	30.38 KB	-rwxr-xr-x	2025-03-06 14:56
htcacheclean	34.24 KB	-rwxr-xr-x	2024-10-04 15:21
htdbm	26.23 KB	-rwxr-xr-x	2024-10-04 15:21
htdigest	14.23 KB	-rwxr-xr-x	2024-10-04 15:21
htpasswd	26.23 KB	-rwxr-xr-x	2024-10-04 15:21
i386	26.58 KB	-rwxr-xr-x	2024-11-21 20:01
icombine	38.63 KB	-rwxr-xr-x	2022-03-29 18:19
iconv	63.13 KB	-rwxr-xr-x	2025-03-06 22:46
id	47.02 KB	-rwxr-xr-x	2022-09-20 15:27
ifnames	4.08 KB	-rwxr-xr-x	2023-01-14 17:42
ijoin	18.26 KB	-rwxr-xr-x	2022-03-29 18:19
inetutils-telnet	186.2 KB	-rwxr-xr-x	2023-08-23 10:01
infocmp	62.31 KB	-rwxr-xr-x	2023-05-07 14:33
infotocap	90.34 KB	-rwxr-xr-x	2023-05-07 14:33
innochecksum	4.56 MB	-rwxr-xr-x	2025-02-19 00:56
innotop	445.44 KB	-rwxr-xr-x	2025-02-19 00:56
install	155.8 KB	-rwxr-xr-x	2022-09-20 15:27
install_compass	14.85 KB	-rwxr-xr-x	2013-12-19 05:41
instmodsh	4.27 KB	-rwxr-xr-x	2023-11-25 20:59
ionice	34.31 KB	-rwxr-xr-x	2024-11-21 20:01
ip	674.82 KB	-rwxr-xr-x	2023-05-22 13:19
ipcmk	34.38 KB	-rwxr-xr-x	2024-11-21 20:01
ipcrm	34.31 KB	-rwxr-xr-x	2024-11-21 20:01
ipcs	74.31 KB	-rwxr-xr-x	2024-11-21 20:01
iptables-xml	88.98 KB	-rwxr-xr-x	2023-01-16 13:44
ischroot	14.32 KB	-rwxr-xr-x	2023-07-28 23:46
ispell	102.73 KB	-rwxr-xr-x	2022-03-29 18:19
ispell-wrapper	7.05 KB	-rwxr-xr-x	2023-03-14 21:17
join	54.98 KB	-rwxr-xr-x	2022-09-20 15:27
journalctl	74.64 KB	-rwxr-xr-x	2025-03-06 14:56
json_pp	4.88 KB	-rwxr-xr-x	2023-11-25 20:59
kbd_mode	14.82 KB	-rwxr-xr-x	2023-03-23 09:34
kbdinfo	14.53 KB	-rwxr-xr-x	2023-03-23 09:34
kbxutil	162.77 KB	-rwxr-xr-x	2023-03-26 13:03
kernel-install	12.75 KB	-rwxr-xr-x	2025-03-06 14:56
kill	22.3 KB	-rwxr-xr-x	2022-12-19 06:06
killall	31.95 KB	-rwxr-xr-x	2022-12-13 05:27
kmod	174.27 KB	-rwxr-xr-x	2022-12-10 00:02
laptop-detect	3.73 KB	-rwxr-xr-x	2017-08-12 15:24
last	50.31 KB	-rwxr-xr-x	2024-11-21 20:01
lastb	50.31 KB	-rwxr-xr-x	2024-11-21 20:01
lastlog	31.75 KB	-rwxr-xr-x	2023-03-23 12:40
lcf	7.6 KB	-rwxr-xr-x	2024-12-20 07:39
ld	1.27 MB	-rwxr-xr-x	2023-01-14 17:24
ld.bfd	1.27 MB	-rwxr-xr-x	2023-01-14 17:24
ld.gold	2.99 MB	-rwxr-xr-x	2023-01-14 17:24
ld.so	209.96 KB	-rwxr-xr-x	2025-03-06 22:46
ldd	5.28 KB	-rwxr-xr-x	2025-03-06 22:46
less	194.3 KB	-rwxr-xr-x	2024-05-02 18:30
lessecho	14.24 KB	-rwxr-xr-x	2024-05-02 18:30
lessfile	8.83 KB	-rwxr-xr-x	2024-05-02 18:30
lesskey	23.63 KB	-rwxr-xr-x	2024-05-02 18:30
lesspipe	8.83 KB	-rwxr-xr-x	2024-05-02 18:30
letsencrypt	958 B	-rwxr-xr-x	2023-04-16 05:22
lexgrog	107.48 KB	-rwxr-xr-x	2023-03-12 22:23
lft	2.43 KB	-rwxr-xr-x	2023-02-25 12:24
lft.db	2.43 KB	-rwxr-xr-x	2023-02-25 12:24
libnetcfg	15.41 KB	-rwxr-xr-x	2023-11-25 20:59
libtoolize	133.12 KB	-rwxr-xr-x	2024-04-09 20:04
link	38.83 KB	-rwxr-xr-x	2022-09-20 15:27
linux-boot-prober	1.54 KB	-rwxr-xr-x	2018-08-10 19:23
linux-check-removal	4.56 KB	-rwxr-xr-x	2018-09-05 17:52
linux-update-symlinks	6.17 KB	-rwxr-xr-x	2016-06-05 01:13
linux-version	2.63 KB	-rwxr-xr-x	2022-02-11 02:17
linux32	26.58 KB	-rwxr-xr-x	2024-11-21 20:01
linux64	26.58 KB	-rwxr-xr-x	2024-11-21 20:01
ln	71.12 KB	-rwxr-xr-x	2022-09-20 15:27
lnstat	26.59 KB	-rwxr-xr-x	2023-05-22 13:19
loadkeys	215.34 KB	-rwxr-xr-x	2023-03-23 09:34
loadunimap	38.87 KB	-rwxr-xr-x	2023-03-23 09:34
locale	46.16 KB	-rwxr-xr-x	2025-03-06 22:46
localectl	26.38 KB	-rwxr-xr-x	2025-03-06 14:56
localedef	291.91 KB	-rwxr-xr-x	2025-03-06 22:46
logger	54.9 KB	-rwxr-xr-x	2024-11-21 20:01
login	51.78 KB	-rwxr-xr-x	2023-03-23 12:40
loginctl	58.48 KB	-rwxr-xr-x	2025-03-06 14:56
logname	38.83 KB	-rwxr-xr-x	2022-09-20 15:27
logresolve	14.24 KB	-rwxr-xr-x	2024-10-04 15:21
look	18.31 KB	-rwxr-xr-x	2024-11-21 20:01
ls	147.8 KB	-rwxr-xr-x	2022-09-20 15:27
lsattr	14.24 KB	-rwxr-xr-x	2023-03-05 03:16
lsb_release	2.59 KB	-rwxr-xr-x	2022-09-26 20:06
lsblk	202.31 KB	-rwxr-xr-x	2024-11-21 20:01
lscpu	126.31 KB	-rwxr-xr-x	2024-11-21 20:01
lsfd	120.3 KB	-rwxr-xr-x	2024-11-21 20:01
lsinitramfs	735 B	-rwxr-xr-x	2024-08-22 19:30
lsipc	98.31 KB	-rwxr-xr-x	2024-11-21 20:01
lsirq	34.48 KB	-rwxr-xr-x	2024-11-21 20:01
lslocks	70.7 KB	-rwxr-xr-x	2024-11-21 20:01
lslogins	94.31 KB	-rwxr-xr-x	2024-11-21 20:01
lsmem	66.31 KB	-rwxr-xr-x	2024-11-21 20:01
lsmod	174.27 KB	-rwxr-xr-x	2022-12-10 00:02
lsns	82.31 KB	-rwxr-xr-x	2024-11-21 20:01
lsof	175.61 KB	-rwxr-xr-x	2022-04-28 04:08
lspci	104.04 KB	-rwxr-xr-x	2023-01-17 23:50
lspgpot	1.06 KB	-rwxr-xr-x	2017-08-28 10:22
lsusb	247.07 KB	-rwxr-xr-x	2024-01-24 21:32
lto-dump	30.47 MB	-rwxr-xr-x	2023-01-08 09:12
lto-dump-12	30.47 MB	-rwxr-xr-x	2023-01-08 09:12
lzcat	82.7 KB	-rwxr-xr-x	2025-04-03 19:55
lzcmp	7.25 KB	-rwxr-xr-x	2025-04-03 19:55
lzdiff	7.25 KB	-rwxr-xr-x	2025-04-03 19:55
lzegrep	10.09 KB	-rwxr-xr-x	2025-04-03 19:55
lzfgrep	10.09 KB	-rwxr-xr-x	2025-04-03 19:55
lzgrep	10.09 KB	-rwxr-xr-x	2025-04-03 19:55
lzless	1.77 KB	-rwxr-xr-x	2025-04-03 19:55
lzma	82.7 KB	-rwxr-xr-x	2025-04-03 19:55
lzmainfo	14.3 KB	-rwxr-xr-x	2025-04-03 19:55
lzmore	2.14 KB	-rwxr-xr-x	2025-04-03 19:55
m4	271.52 KB	-rwxr-xr-x	2023-02-03 13:00
make	234.65 KB	-rwxr-xr-x	2021-04-10 13:55
make-first-existing-target	4.79 KB	-rwxr-xr-x	2021-04-10 13:55
man	121.36 KB	-rwxr-xr-x	2023-03-12 22:23
man-recode	35.38 KB	-rwxr-xr-x	2023-03-12 22:23
mandb	147.61 KB	-rwxr-xr-x	2023-03-12 22:23
manpath	34.78 KB	-rwxr-xr-x	2023-03-12 22:23
mapscrn	34.84 KB	-rwxr-xr-x	2023-03-23 09:34
mariadb	5.06 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-access	109.31 KB	-rwxr-xr-x	2025-02-19 00:56
mariadb-admin	4.83 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-analyze	4.83 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-binlog	5.11 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-check	4.83 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-conv	4.55 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-convert-table-format	4.12 KB	-rwxr-xr-x	2025-02-19 00:56
mariadb-dump	4.92 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-dumpslow	8.05 KB	-rwxr-xr-x	2025-02-19 00:56
mariadb-find-rows	3.21 KB	-rwxr-xr-x	2025-02-19 00:56
mariadb-fix-extensions	1.22 KB	-rwxr-xr-x	2025-02-19 00:56
mariadb-hotcopy	34.52 KB	-rwxr-xr-x	2025-02-19 00:56
mariadb-import	4.82 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-install-db	22.13 KB	-rwxr-xr-x	2025-02-19 00:56
mariadb-optimize	4.83 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-plugin	4.52 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-repair	4.83 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-report	49.02 KB	-rwxr-xr-x	2025-02-19 00:56
mariadb-secure-installation	13.49 KB	-rwxr-xr-x	2025-02-19 00:56
mariadb-service-convert	2.45 KB	-rwxr-xr-x	2025-02-19 00:56
mariadb-setpermission	17.56 KB	-rwxr-xr-x	2025-02-19 00:56
mariadb-show	4.82 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-slap	4.84 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-tzinfo-to-sql	4.53 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-upgrade	4.96 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-waitpid	4.51 MB	-rwxr-xr-x	2025-02-19 00:56
mariadbcheck	4.83 MB	-rwxr-xr-x	2025-02-19 00:56
mariadbd-multi	26.69 KB	-rwxr-xr-x	2025-02-19 00:56
mariadbd-safe	30.42 KB	-rwxr-xr-x	2025-02-19 00:56
mariadbd-safe-helper	4.49 MB	-rwxr-xr-x	2025-02-19 00:56
mawk	154.66 KB	-rwxr-xr-x	2022-06-17 15:35
mcookie	34.38 KB	-rwxr-xr-x	2024-11-21 20:01
md5sum	50.95 KB	-rwxr-xr-x	2022-09-20 15:27
md5sum.textutils	50.95 KB	-rwxr-xr-x	2022-09-20 15:27
mdig	50.33 KB	-rwxr-xr-x	2025-01-25 10:14
memusage	7.29 KB	-rwxr-xr-x	2025-03-06 22:46
memusagestat	22.69 KB	-rwxr-xr-x	2025-03-06 22:46
mesg	18.3 KB	-rwxr-xr-x	2024-11-21 20:01
migrate-pubring-from-classic-gpg	2.99 KB	-rwxr-xr-x	2022-09-01 22:08
mk_modmap	15.78 KB	-rwxr-xr-x	2023-03-23 09:34
mkdir	95.27 KB	-rwxr-xr-x	2022-09-20 15:27
mkfifo	67.17 KB	-rwxr-xr-x	2022-09-20 15:27
mknod	71.2 KB	-rwxr-xr-x	2022-09-20 15:27
mktemp	42.92 KB	-rwxr-xr-x	2022-09-20 15:27
mongod	207.63 MB	-rwxr-xr-x	2013-12-19 05:41
mongodump	17.53 MB	-rwxr-xr-x	2025-04-01 15:22
mongoexport	17.26 MB	-rwxr-xr-x	2025-04-01 15:22
mongofiles	17.25 MB	-rwxr-xr-x	2025-04-01 15:22
mongoimport	17.44 MB	-rwxr-xr-x	2025-04-01 15:22
mongorestore	17.9 MB	-rwxr-xr-x	2025-04-01 15:22
mongos	160.52 MB	-rwxr-xr-x	2013-12-19 05:41
mongosh	142.35 MB	-rwxr-xr-x	2025-03-06 15:39
mongostat	17.05 MB	-rwxr-xr-x	2025-04-01 15:22
mongotop	16.67 MB	-rwxr-xr-x	2025-04-01 15:22
more	58.31 KB	-rwxr-xr-x	2024-11-21 20:01
mount	58.3 KB	-rwsr-xr-x	2024-11-21 20:01
mountpoint	18.3 KB	-rwxr-xr-x	2024-11-21 20:01
msgattrib	26.3 KB	-rwxr-xr-x	2023-02-26 15:20
msgcat	22.3 KB	-rwxr-xr-x	2023-02-26 15:20
msgcmp	26.3 KB	-rwxr-xr-x	2023-02-26 15:20
msgcomm	22.3 KB	-rwxr-xr-x	2023-02-26 15:20
msgconv	22.3 KB	-rwxr-xr-x	2023-02-26 15:20
msgen	22.3 KB	-rwxr-xr-x	2023-02-26 15:20
msgexec	18.3 KB	-rwxr-xr-x	2023-02-26 15:20
msgfilter	30.3 KB	-rwxr-xr-x	2023-02-26 15:20
msgfmt	86.5 KB	-rwxr-xr-x	2023-02-26 15:20
msggrep	114.42 KB	-rwxr-xr-x	2023-02-26 15:20
msginit	66.65 KB	-rwxr-xr-x	2023-02-26 15:20
msgmerge	70.68 KB	-rwxr-xr-x	2023-02-26 15:20
msgunfmt	34.32 KB	-rwxr-xr-x	2023-02-26 15:20
msguniq	22.3 KB	-rwxr-xr-x	2023-02-26 15:20
msql2mysql	1.41 KB	-rwxr-xr-x	2025-02-19 00:56
mt	83.38 KB	-rwxr-xr-x	2022-09-14 19:45
mt-gnu	83.38 KB	-rwxr-xr-x	2022-09-14 19:45
mtrace	6.35 KB	-rwxr-xr-x	2025-03-06 22:46
munchlist	31.23 KB	-rwxr-xr-x	2022-03-29 18:19
mv	139.62 KB	-rwxr-xr-x	2022-09-20 15:27
my_print_defaults	4.52 MB	-rwxr-xr-x	2025-02-19 00:56
myisam_ftdump	4.85 MB	-rwxr-xr-x	2025-02-19 00:56
myisamchk	4.97 MB	-rwxr-xr-x	2025-02-19 00:56
myisamlog	4.83 MB	-rwxr-xr-x	2025-02-19 00:56
myisampack	4.88 MB	-rwxr-xr-x	2025-02-19 00:56
mysql	5.06 MB	-rwxr-xr-x	2025-02-19 00:56
mysql_convert_table_format	4.12 KB	-rwxr-xr-x	2025-02-19 00:56
mysql_find_rows	3.21 KB	-rwxr-xr-x	2025-02-19 00:56
mysql_fix_extensions	1.22 KB	-rwxr-xr-x	2025-02-19 00:56
mysql_install_db	22.13 KB	-rwxr-xr-x	2025-02-19 00:56
mysql_plugin	4.52 MB	-rwxr-xr-x	2025-02-19 00:56
mysql_secure_installation	13.49 KB	-rwxr-xr-x	2025-02-19 00:56
mysql_setpermission	17.56 KB	-rwxr-xr-x	2025-02-19 00:56
mysql_tzinfo_to_sql	4.53 MB	-rwxr-xr-x	2025-02-19 00:56
mysql_upgrade	4.96 MB	-rwxr-xr-x	2025-02-19 00:56
mysql_waitpid	4.51 MB	-rwxr-xr-x	2025-02-19 00:56
mysqlaccess	109.31 KB	-rwxr-xr-x	2025-02-19 00:56
mysqladmin	4.83 MB	-rwxr-xr-x	2025-02-19 00:56
mysqlanalyze	4.83 MB	-rwxr-xr-x	2025-02-19 00:56
mysqlbinlog	5.11 MB	-rwxr-xr-x	2025-02-19 00:56
mysqlcheck	4.83 MB	-rwxr-xr-x	2025-02-19 00:56
mysqld_multi	26.69 KB	-rwxr-xr-x	2025-02-19 00:56
mysqld_safe	30.42 KB	-rwxr-xr-x	2025-02-19 00:56
mysqld_safe_helper	4.49 MB	-rwxr-xr-x	2025-02-19 00:56
mysqldump	4.92 MB	-rwxr-xr-x	2025-02-19 00:56
mysqldumpslow	8.05 KB	-rwxr-xr-x	2025-02-19 00:56
mysqlhotcopy	34.52 KB	-rwxr-xr-x	2025-02-19 00:56
mysqlimport	4.82 MB	-rwxr-xr-x	2025-02-19 00:56
mysqloptimize	4.83 MB	-rwxr-xr-x	2025-02-19 00:56
mysqlrepair	4.83 MB	-rwxr-xr-x	2025-02-19 00:56
mysqlreport	49.02 KB	-rwxr-xr-x	2025-02-19 00:56
mysqlshow	4.82 MB	-rwxr-xr-x	2025-02-19 00:56
mysqlslap	4.84 MB	-rwxr-xr-x	2025-02-19 00:56
mytop	71.95 KB	-rwxr-xr-x	2025-02-19 00:56
namei	34.31 KB	-rwxr-xr-x	2024-11-21 20:01
nano	280.74 KB	-rwxr-xr-x	2024-05-06 06:10
nawk	696.44 KB	-rwxr-xr-x	2023-02-19 13:30
nc	34.13 KB	-rwxr-xr-x	2021-08-20 11:41
nc.traditional	34.13 KB	-rwxr-xr-x	2021-08-20 11:41
neqn	913 B	-rwxr-xr-x	2023-03-07 09:38
netcat	34.13 KB	-rwxr-xr-x	2021-08-20 11:41
networkctl	106.38 KB	-rwxr-xr-x	2025-03-06 14:56
newgrp	47.75 KB	-rwsr-xr-x	2023-03-23 12:40
ngettext	34.31 KB	-rwxr-xr-x	2023-02-26 15:20
nice	42.86 KB	-rwxr-xr-x	2022-09-20 15:27
nisdomainname	22.15 KB	-rwxr-xr-x	2022-12-19 13:33
nl	111.11 KB	-rwxr-xr-x	2022-09-20 15:27
nm	44.03 KB	-rwxr-xr-x	2023-01-14 17:24
node	97.47 MB	-rwxr-xr-x	2024-04-10 12:32
nodejs	97.47 MB	-rwxr-xr-x	2024-04-10 12:32
nohup	42.89 KB	-rwxr-xr-x	2022-09-20 15:27
normalizer	244 B	-rwxr-xr-x	2022-11-27 08:00
npm	54 B	-rwxr-xr-x	2022-10-11 10:59
nproc	42.89 KB	-rwxr-xr-x	2022-09-20 15:27
npx	2.86 KB	-rwxr-xr-x	2023-08-09 13:29
nroff	3.22 KB	-rwxr-xr-x	2023-03-07 09:38
nsenter	34.54 KB	-rwxr-xr-x	2024-11-21 20:01
nslookup	114.74 KB	-rwxr-xr-x	2025-01-25 10:14
nstat	104.45 KB	-rwxr-xr-x	2023-05-22 13:19
nsupdate	74.55 KB	-rwxr-xr-x	2025-01-25 10:14
numfmt	67.02 KB	-rwxr-xr-x	2022-09-20 15:27
objcopy	155.66 KB	-rwxr-xr-x	2023-01-14 17:24
objdump	362.56 KB	-rwxr-xr-x	2023-01-14 17:24
od	79.02 KB	-rwxr-xr-x	2022-09-20 15:27
open	18.06 KB	-rwxr-xr-x	2021-11-29 13:07
openssl	953.26 KB	-rwxr-xr-x	2024-10-27 14:16
openvt	23.13 KB	-rwxr-xr-x	2023-03-23 09:34
os-prober	4.42 KB	-rwxr-xr-x	2021-09-22 18:07
pager	194.3 KB	-rwxr-xr-x	2024-05-02 18:30
partx	118.31 KB	-rwxr-xr-x	2024-11-21 20:01
passwd	66.65 KB	-rwsr-xr-x	2023-03-23 12:40
paste	42.89 KB	-rwxr-xr-x	2022-09-20 15:27
patch	187.44 KB	-rwxr-xr-x	2021-01-09 08:58
pathchk	42.86 KB	-rwxr-xr-x	2022-09-20 15:27
pcre2-config	1.93 KB	-rwxr-xr-x	2023-01-01 15:44
pdb3	62.4 KB	-rwxr-xr-x	2024-11-30 21:22
pdb3.11	62.4 KB	-rwxr-xr-x	2024-11-30 21:22
pear	793 B	-rwxr-xr-x	2023-06-12 06:24
peardev	814 B	-rwxr-xr-x	2023-06-12 06:24
pecl	727 B	-rwxr-xr-x	2023-06-12 06:24
peekfd	14.5 KB	-rwxr-xr-x	2022-12-13 05:27
perl	3.63 MB	-rwxr-xr-x	2023-11-25 20:59
perl5.36-x86_64-linux-gnu	14.41 KB	-rwxr-xr-x	2023-11-25 20:59
perl5.36.0	3.63 MB	-rwxr-xr-x	2023-11-25 20:59
perlbug	44.12 KB	-rwxr-xr-x	2023-11-25 20:59
perldoc	125 B	-rwxr-xr-x	2023-07-05 08:56
perlivp	10.61 KB	-rwxr-xr-x	2023-11-25 20:59
perlthanks	44.12 KB	-rwxr-xr-x	2023-11-25 20:59
perror	4.71 MB	-rwxr-xr-x	2025-02-19 00:56
pgrep	34.42 KB	-rwxr-xr-x	2022-12-19 06:06
phar	14.88 KB	-rwxr-xr-x	2025-10-01 20:26
phar.default	14.88 KB	-rwxr-xr-x	2025-10-01 20:26
phar.phar	14.88 KB	-rwxr-xr-x	2025-10-01 20:26
phar.phar.default	14.88 KB	-rwxr-xr-x	2025-10-01 20:26
phar.phar8.2	14.88 KB	-rwxr-xr-x	2025-03-13 18:10
phar.phar8.4	14.88 KB	-rwxr-xr-x	2025-10-01 20:26
phar8.2	14.88 KB	-rwxr-xr-x	2025-03-13 18:10
phar8.2.phar	14.88 KB	-rwxr-xr-x	2025-03-13 18:10
phar8.4	14.88 KB	-rwxr-xr-x	2025-10-01 20:26
phar8.4.phar	14.88 KB	-rwxr-xr-x	2025-10-01 20:26
php	5.72 MB	-rwxr-xr-x	2025-10-01 20:26
php-config	4.24 KB	-rwxr-xr-x	2025-03-13 18:10
php-config8.2	4.24 KB	-rwxr-xr-x	2025-03-13 18:10
php.default	5.72 MB	-rwxr-xr-x	2025-10-01 20:26
php8.2	5.4 MB	-rwxr-xr-x	2025-03-13 18:10
php8.4	5.72 MB	-rwxr-xr-x	2025-10-01 20:26
phpabtpl	8.47 KB	-rwxr-xr-x	2023-01-28 15:13
phpize	4.83 KB	-rwxr-xr-x	2025-03-13 18:10
phpize8.2	4.83 KB	-rwxr-xr-x	2025-03-13 18:10
pic	220.27 KB	-rwxr-xr-x	2023-03-07 09:38
pico	280.74 KB	-rwxr-xr-x	2024-05-06 06:10
piconv	8.16 KB	-rwxr-xr-x	2023-11-25 20:59
pidof	26.31 KB	-rwxr-xr-x	2023-04-03 06:25
pidwait	34.42 KB	-rwxr-xr-x	2022-12-19 06:06
pinentry	70.57 KB	-rwxr-xr-x	2022-10-18 14:52
pinentry-curses	70.57 KB	-rwxr-xr-x	2022-10-18 14:52
ping	88.45 KB	-rwxr-xr-x	2024-09-24 17:00
ping4	88.45 KB	-rwxr-xr-x	2024-09-24 17:00
ping6	88.45 KB	-rwxr-xr-x	2024-09-24 17:00
pinky	47.05 KB	-rwxr-xr-x	2022-09-20 15:27
pip	221 B	-rwxr-xr-x	2023-02-19 14:19
pip3	221 B	-rwxr-xr-x	2023-02-19 14:19
pip3.11	221 B	-rwxr-xr-x	2023-02-19 14:19
pkaction	18.23 KB	-rwxr-xr-x	2023-01-31 22:05
pkcheck	22.3 KB	-rwxr-xr-x	2023-01-31 22:05
pkcon	55.61 KB	-rwxr-xr-x	2023-05-28 17:00
pkg-config	44.04 KB	-rwxr-xr-x	2023-01-22 11:06
pkgconf	44.04 KB	-rwxr-xr-x	2023-01-22 11:06
pkgtools	1.34 KB	-rwxr-xr-x	2023-01-28 15:13
pkill	34.42 KB	-rwxr-xr-x	2022-12-19 06:06
pkmon	22.79 KB	-rwxr-xr-x	2023-05-28 17:00
pkttyagent	18.23 KB	-rwxr-xr-x	2023-01-31 22:05
pl2pm	4.43 KB	-rwxr-xr-x	2023-11-25 20:59
pldd	22.69 KB	-rwxr-xr-x	2025-03-06 22:46
pm2	56 B	-rwxr-xr-x	2025-04-08 13:05
pm2-dev	59 B	-rwxr-xr-x	2025-04-08 13:05
pm2-docker	67 B	-rwxr-xr-x	2025-04-08 13:05
pm2-runtime	67 B	-rwxr-xr-x	2025-04-08 13:05
pmap	34.34 KB	-rwxr-xr-x	2022-12-19 06:06
po2debconf	8.47 KB	-rwxr-xr-x	2020-12-30 01:09
pod2html	4.04 KB	-rwxr-xr-x	2023-11-25 20:59
pod2man	14.68 KB	-rwxr-xr-x	2023-11-25 20:59
pod2text	10.55 KB	-rwxr-xr-x	2023-11-25 20:59
pod2usage	4.01 KB	-rwxr-xr-x	2023-11-25 20:59
podchecker	3.57 KB	-rwxr-xr-x	2023-11-25 20:59
podebconf-display-po	12.67 KB	-rwxr-xr-x	2015-01-10 14:10
podebconf-report-po	31.76 KB	-rwxr-xr-x	2015-01-10 15:44
pr	79.11 KB	-rwxr-xr-x	2022-09-20 15:27
preconv	66.43 KB	-rwxr-xr-x	2023-03-07 09:38
print	18.06 KB	-rwxr-xr-x	2021-11-29 13:07
printenv	34.83 KB	-rwxr-xr-x	2022-09-20 15:27
printf	62.92 KB	-rwxr-xr-x	2022-09-20 15:27
prlimit	38.83 KB	-rwxr-xr-x	2024-11-21 20:01
procan	79.91 KB	-rwxr-xr-x	2022-11-06 08:15
prove	13.34 KB	-rwxr-xr-x	2023-11-25 20:59
prtstat	18.57 KB	-rwxr-xr-x	2022-12-13 05:27
ps	142.93 KB	-rwxr-xr-x	2022-12-19 06:06
psfaddtable	30.62 KB	-rwxr-xr-x	2023-03-23 09:34
psfgettable	30.62 KB	-rwxr-xr-x	2023-03-23 09:34
psfstriptable	30.62 KB	-rwxr-xr-x	2023-03-23 09:34
psfxtable	30.62 KB	-rwxr-xr-x	2023-03-23 09:34
pslog	14.45 KB	-rwxr-xr-x	2022-12-13 05:27
pstree	35.78 KB	-rwxr-xr-x	2022-12-13 05:27
pstree.x11	35.78 KB	-rwxr-xr-x	2022-12-13 05:27
ptar	3.48 KB	-rwxr-xr-x	2023-11-25 20:59
ptardiff	2.58 KB	-rwxr-xr-x	2023-11-25 20:59
ptargrep	4.29 KB	-rwxr-xr-x	2023-11-25 20:59
ptx	135.23 KB	-rwxr-xr-x	2022-09-20 15:27
pv	63.98 KB	-rwxr-xr-x	2022-04-12 00:55
pwd	42.92 KB	-rwxr-xr-x	2022-09-20 15:27
pwdx	14.3 KB	-rwxr-xr-x	2022-12-19 06:06
py3clean	7.63 KB	-rwxr-xr-x	2023-04-09 10:22
py3compile	13 KB	-rwxr-xr-x	2023-04-09 10:22
py3versions	12.52 KB	-rwxr-xr-x	2023-04-09 10:22
pydoc3	79 B	-rwxr-xr-x	2024-11-30 21:22
pydoc3.11	79 B	-rwxr-xr-x	2024-11-30 21:22
pygettext3	23.67 KB	-rwxr-xr-x	2023-02-07 13:37
pygettext3.11	23.67 KB	-rwxr-xr-x	2023-02-07 13:37
python3	6.52 MB	-rwxr-xr-x	2024-11-30 21:22
python3-config	3 KB	-rwxr-xr-x	2024-11-30 21:22
python3.11	6.52 MB	-rwxr-xr-x	2024-11-30 21:22
python3.11-config	3 KB	-rwxr-xr-x	2024-11-30 21:22
pzstd	742.38 KB	-rwxr-xr-x	2023-03-18 20:58
querybts	10.64 KB	-rwxr-xr-x	2023-04-29 06:38
ranlib	51.17 KB	-rwxr-xr-x	2023-01-14 17:24
rbash	1.21 MB	-rwxr-xr-x	2024-03-29 19:40
rdma	180.6 KB	-rwxr-xr-x	2023-05-22 13:19
readelf	751.38 KB	-rwxr-xr-x	2023-01-14 17:24
readlink	50.89 KB	-rwxr-xr-x	2022-09-20 15:27
realpath	50.92 KB	-rwxr-xr-x	2022-09-20 15:27
recode-sr-latin	14.3 KB	-rwxr-xr-x	2023-02-26 15:20
redis-benchmark	738.63 KB	-rwxr-xr-x	2025-01-19 10:41
redis-check-aof	2.28 MB	-rwxr-xr-x	2025-01-19 10:41
redis-check-rdb	2.28 MB	-rwxr-xr-x	2025-01-19 10:41
redis-cli	366.27 KB	-rwxr-xr-x	2025-01-19 10:41
redis-server	2.28 MB	-rwxr-xr-x	2025-01-19 10:41
rename.ul	22.3 KB	-rwxr-xr-x	2024-11-21 20:01
renice	14.3 KB	-rwxr-xr-x	2024-11-21 20:01
replace	4.5 MB	-rwxr-xr-x	2025-02-19 00:56
report-hw	2.06 KB	-rwxr-xr-x	2021-09-22 18:06
reportbug	110.11 KB	-rwxr-xr-x	2023-04-29 06:38
reset	30.24 KB	-rwxr-xr-x	2023-05-07 14:33
resizecons	26.8 KB	-rwxr-xr-x	2023-03-23 09:34
resizepart	70.31 KB	-rwxr-xr-x	2024-11-21 20:01
resolve_stack_dump	4.52 MB	-rwxr-xr-x	2025-02-19 00:56
resolveip	4.52 MB	-rwxr-xr-x	2025-02-19 00:56
rev	14.3 KB	-rwxr-xr-x	2024-11-21 20:01
rgrep	30 B	-rwxr-xr-x	2020-01-29 12:09
rm	71.05 KB	-rwxr-xr-x	2022-09-20 15:27
rmdir	54.92 KB	-rwxr-xr-x	2022-09-20 15:27
rnano	280.74 KB	-rwxr-xr-x	2024-05-06 06:10
rotatelogs	26.31 KB	-rwxr-xr-x	2024-10-04 15:21
routel	1.62 KB	-rwxr-xr-x	2023-05-22 13:19
rpcgen	95 KB	-rwxr-xr-x	2022-12-02 21:30
rrsync	12.34 KB	-rwxr-xr-x	2025-01-15 18:47
rsync	502.38 KB	-rwxr-xr-x	2025-01-15 18:47
rsync-ssl	5.02 KB	-rwxr-xr-x	2025-01-15 18:47
rtstat	26.59 KB	-rwxr-xr-x	2023-05-22 13:19
run-mailcap	18.06 KB	-rwxr-xr-x	2021-11-29 13:07
run-parts	26.91 KB	-rwxr-xr-x	2023-07-28 23:46
runcon	42.95 KB	-rwxr-xr-x	2022-09-20 15:27
rview	1.55 MB	-rwxr-xr-x	2025-02-16 05:23
savelog	10.24 KB	-rwxr-xr-x	2023-07-28 23:46
scp	266.63 KB	-rwxr-xr-x	2025-02-14 13:06
screendump	14.47 KB	-rwxr-xr-x	2023-03-23 09:34
script	70.3 KB	-rwxr-xr-x	2024-11-21 20:01
scriptlive	54.3 KB	-rwxr-xr-x	2024-11-21 20:01
scriptreplay	46.3 KB	-rwxr-xr-x	2024-11-21 20:01
sdiff	55.08 KB	-rwxr-xr-x	2023-02-03 19:00
sed	123.46 KB	-rwxr-xr-x	2023-01-05 19:55
see	18.06 KB	-rwxr-xr-x	2021-11-29 13:07
select-default-iwrap	474 B	-rwxr-xr-x	2023-03-14 21:17
select-editor	2.39 KB	-rwxr-xr-x	2023-01-14 16:28
sensible-browser	1.26 KB	-rwxr-xr-x	2023-01-14 16:28
sensible-editor	1.24 KB	-rwxr-xr-x	2023-01-14 16:28
sensible-pager	565 B	-rwxr-xr-x	2023-01-14 16:28
seq	58.92 KB	-rwxr-xr-x	2022-09-20 15:27
setarch	26.58 KB	-rwxr-xr-x	2024-11-21 20:01
setfont	58.9 KB	-rwxr-xr-x	2023-03-23 09:34
setkeycodes	14.52 KB	-rwxr-xr-x	2023-03-23 09:34
setleds	18.55 KB	-rwxr-xr-x	2023-03-23 09:34
setlogcons	14.52 KB	-rwxr-xr-x	2023-03-23 09:34
setmetamode	14.66 KB	-rwxr-xr-x	2023-03-23 09:34
setpci	30.31 KB	-rwxr-xr-x	2023-01-17 23:50
setpriv	78.31 KB	-rwxr-xr-x	2024-11-21 20:01
setsid	14.3 KB	-rwxr-xr-x	2024-11-21 20:01
setterm	46.31 KB	-rwxr-xr-x	2024-11-21 20:01
setupcon	39.35 KB	-rwxr-xr-x	2023-05-21 21:30
setvtrgb	14.65 KB	-rwxr-xr-x	2023-03-23 09:34
sftp	282.59 KB	-rwxr-xr-x	2025-02-14 13:06
sg	47.75 KB	-rwsr-xr-x	2023-03-23 12:40
sh	122.7 KB	-rwxr-xr-x	2023-01-05 13:20
sha1sum	54.95 KB	-rwxr-xr-x	2022-09-20 15:27
sha224sum	58.95 KB	-rwxr-xr-x	2022-09-20 15:27
sha256sum	58.95 KB	-rwxr-xr-x	2022-09-20 15:27
sha384sum	62.95 KB	-rwxr-xr-x	2022-09-20 15:27
sha512sum	62.95 KB	-rwxr-xr-x	2022-09-20 15:27
shasum	9.75 KB	-rwxr-xr-x	2023-11-25 20:59
showconsolefont	22.57 KB	-rwxr-xr-x	2023-03-23 09:34
showkey	18.56 KB	-rwxr-xr-x	2023-03-23 09:34
shred	63.14 KB	-rwxr-xr-x	2022-09-20 15:27
shtool	138.76 KB	-rwxr-xr-x	2019-12-23 21:26
shtoolize	15.16 KB	-rwxr-xr-x	2019-12-23 21:26
shuf	58.98 KB	-rwxr-xr-x	2022-09-20 15:27
size	26.86 KB	-rwxr-xr-x	2023-01-14 17:24
skill	30.33 KB	-rwxr-xr-x	2022-12-19 06:06
slabtop	22.37 KB	-rwxr-xr-x	2022-12-19 06:06
sleep	42.86 KB	-rwxr-xr-x	2022-09-20 15:27
slogin	1.07 MB	-rwxr-xr-x	2025-02-14 13:06
snice	30.33 KB	-rwxr-xr-x	2022-12-19 06:06
socat	401.98 KB	-rwxr-xr-x	2022-11-06 08:15
soelim	50.43 KB	-rwxr-xr-x	2023-03-07 09:38
sort	115.68 KB	-rwxr-xr-x	2022-09-20 15:27
sotruss	4.18 KB	-rwxr-xr-x	2025-03-06 22:46
splain	18.99 KB	-rwxr-xr-x	2023-11-25 20:59
split	59.55 KB	-rwxr-xr-x	2022-09-20 15:27
splitfont	14.39 KB	-rwxr-xr-x	2023-03-23 09:34
sprof	26.81 KB	-rwxr-xr-x	2025-03-06 22:46
ss	189.14 KB	-rwxr-xr-x	2023-05-22 13:19
ssh	1.07 MB	-rwxr-xr-x	2025-02-14 13:06
ssh-add	518.44 KB	-rwxr-xr-x	2025-02-14 13:06
ssh-agent	474.38 KB	-rwxr-sr-x	2025-02-14 13:06
ssh-argv0	1.42 KB	-rwxr-xr-x	2025-02-14 11:18
ssh-copy-id	12.38 KB	-rwxr-xr-x	2023-02-02 12:21
ssh-keygen	646.44 KB	-rwxr-xr-x	2025-02-14 13:06
ssh-keyscan	622.47 KB	-rwxr-xr-x	2025-02-14 13:06
stat	95.2 KB	-rwxr-xr-x	2022-09-20 15:27
stdbuf	58.92 KB	-rwxr-xr-x	2022-09-20 15:27
streamzip	7.75 KB	-rwxr-xr-x	2023-11-25 20:59
strings	30.98 KB	-rwxr-xr-x	2023-01-14 17:24
strip	155.7 KB	-rwxr-xr-x	2023-01-14 17:24
stty	83.02 KB	-rwxr-xr-x	2022-09-20 15:27
su	70.31 KB	-rwsr-xr-x	2024-11-21 20:01
sudo	275.02 KB	-rwsr-xr-x	2023-06-27 11:45
sudoedit	275.02 KB	-rwsr-xr-x	2023-06-27 11:45
sudoreplay	115.7 KB	-rwxr-xr-x	2023-06-27 11:45
sum	50.96 KB	-rwxr-xr-x	2022-09-20 15:27
sync	38.89 KB	-rwxr-xr-x	2022-09-20 15:27
systemctl	1.29 MB	-rwxr-xr-x	2025-03-06 14:56
systemd	90.38 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-analyze	182.61 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-ask-password	18.48 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-cat	18.38 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-cgls	22.48 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-cgtop	38.4 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-creds	42.61 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-cryptenroll	58.6 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-delta	26.38 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-detect-virt	18.37 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-escape	18.37 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-firstboot	50.59 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-hwdb	126.66 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-id128	22.37 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-inhibit	22.39 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-machine-id-setup	18.48 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-mount	50.59 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-notify	18.38 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-path	18.37 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-repart	150.69 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-run	58.57 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-socket-activate	26.38 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-stdio-bridge	18.38 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-sysext	42.49 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-sysusers	62.68 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-tmpfiles	110.57 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-tty-ask-password-agent	34.38 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-umount	50.59 KB	-rwxr-xr-x	2025-03-06 14:56
tabs	18.23 KB	-rwxr-xr-x	2023-05-07 14:33
tac	111.05 KB	-rwxr-xr-x	2022-09-20 15:27
tail	75.14 KB	-rwxr-xr-x	2022-09-20 15:27
tar	519.52 KB	-rwxr-xr-x	2024-01-20 09:27
tasksel	26.82 KB	-rwxr-xr-x	2023-05-25 06:27
taskset	62.31 KB	-rwxr-xr-x	2024-11-21 20:01
tbl	146.43 KB	-rwxr-xr-x	2023-03-07 09:38
tee	42.95 KB	-rwxr-xr-x	2022-09-20 15:27
telnet	186.2 KB	-rwxr-xr-x	2023-08-23 10:01
tempfile	14.18 KB	-rwxr-xr-x	2023-07-28 23:46
test	58.89 KB	-rwxr-xr-x	2022-09-20 15:27
tic	90.34 KB	-rwxr-xr-x	2023-05-07 14:33
timedatectl	42.37 KB	-rwxr-xr-x	2025-03-06 14:56
timeout	47.49 KB	-rwxr-xr-x	2022-09-20 15:27
tload	18.32 KB	-rwxr-xr-x	2022-12-19 06:06
toe	22.23 KB	-rwxr-xr-x	2023-05-07 14:33
top	131.58 KB	-rwxr-xr-x	2022-12-19 06:06
touch	107.05 KB	-rwxr-xr-x	2022-09-20 15:27
tput	26.27 KB	-rwxr-xr-x	2023-05-07 14:33
tr	54.89 KB	-rwxr-xr-x	2022-09-20 15:27
traceproto	2.82 KB	-rwxr-xr-x	2023-02-25 12:24
traceproto.db	2.82 KB	-rwxr-xr-x	2023-02-25 12:24
traceroute	71.23 KB	-rwxr-xr-x	2023-02-25 12:24
traceroute-nanog	1.58 KB	-rwxr-xr-x	2023-02-25 12:24
traceroute.db	71.23 KB	-rwxr-xr-x	2023-02-25 12:24
traceroute6	71.23 KB	-rwxr-xr-x	2023-02-25 12:24
traceroute6.db	71.23 KB	-rwxr-xr-x	2023-02-25 12:24
troff	755.83 KB	-rwxr-xr-x	2023-03-07 09:38
true	34.83 KB	-rwxr-xr-x	2022-09-20 15:27
truncate	42.89 KB	-rwxr-xr-x	2022-09-20 15:27
tryaffix	4.8 KB	-rwxr-xr-x	2022-03-29 18:19
tset	30.24 KB	-rwxr-xr-x	2023-05-07 14:33
tsort	54.89 KB	-rwxr-xr-x	2022-09-20 15:27
tty	34.86 KB	-rwxr-xr-x	2022-09-20 15:27
tzselect	14.99 KB	-rwxr-xr-x	2025-03-06 22:46
ucf	40.69 KB	-rwxr-xr-x	2024-12-20 07:39
ucfq	18.91 KB	-rwxr-xr-x	2024-12-20 07:39
ucfr	10.85 KB	-rwxr-xr-x	2024-12-20 07:39
uclampset	62.31 KB	-rwxr-xr-x	2024-11-21 20:01
udevadm	1.29 MB	-rwxr-xr-x	2025-03-06 14:56
ul	22.31 KB	-rwxr-xr-x	2024-11-21 20:01
umount	34.3 KB	-rwsr-xr-x	2024-11-21 20:01
uname	42.86 KB	-rwxr-xr-x	2022-09-20 15:27
uncompress	2.29 KB	-rwxr-xr-x	2022-04-10 02:22
unexpand	42.92 KB	-rwxr-xr-x	2022-09-20 15:27
unicode_start	2.71 KB	-rwxr-xr-x	2023-03-23 09:34
unicode_stop	528 B	-rwxr-xr-x	2023-03-23 09:34
uniq	46.95 KB	-rwxr-xr-x	2022-09-20 15:27
unlink	38.83 KB	-rwxr-xr-x	2022-09-20 15:27
unlzma	82.7 KB	-rwxr-xr-x	2025-04-03 19:55
unmkinitramfs	3.59 KB	-rwxr-xr-x	2024-08-22 19:30
unshare	82.54 KB	-rwxr-xr-x	2024-11-21 20:01
unxz	82.7 KB	-rwxr-xr-x	2025-04-03 19:55
unzip	175.05 KB	-rwxr-xr-x	2023-02-19 18:02
unzipsfx	82.86 KB	-rwxr-xr-x	2023-02-19 18:02
unzstd	1.22 MB	-rwxr-xr-x	2023-03-18 20:58
update-alternatives	58.31 KB	-rwxr-xr-x	2023-05-11 02:04
update-mime-database	59.27 KB	-rwxr-xr-x	2022-04-29 17:19
uptime	14.3 KB	-rwxr-xr-x	2022-12-19 06:06
usb-devices	4.35 KB	-rwxr-xr-x	2024-01-24 21:32
usbhid-dump	30.76 KB	-rwxr-xr-x	2024-01-24 21:32
usbreset	14.46 KB	-rwxr-xr-x	2024-01-24 21:32
users	38.89 KB	-rwxr-xr-x	2022-09-20 15:27
utmpdump	30.3 KB	-rwxr-xr-x	2024-11-21 20:01
vdir	147.8 KB	-rwxr-xr-x	2022-09-20 15:27
vi	1.55 MB	-rwxr-xr-x	2025-02-16 05:23
view	1.55 MB	-rwxr-xr-x	2025-02-16 05:23
vim.tiny	1.55 MB	-rwxr-xr-x	2025-02-16 05:23
vmstat	34.72 KB	-rwxr-xr-x	2022-12-19 06:06
w	22.3 KB	-rwxr-xr-x	2022-12-19 06:06
wall	38.3 KB	-rwxr-xr-x	2024-11-21 20:01
watch	26.71 KB	-rwxr-xr-x	2022-12-19 06:06
watchgnupg	18.23 KB	-rwxr-xr-x	2023-03-26 13:03
wc	51.05 KB	-rwxr-xr-x	2022-09-20 15:27
wdctl	70.34 KB	-rwxr-xr-x	2024-11-21 20:01
wget	459.36 KB	-rwxr-xr-x	2025-03-03 13:32
whatis	51.29 KB	-rwxr-xr-x	2023-03-12 22:23
whereis	30.77 KB	-rwxr-xr-x	2024-11-21 20:01
which	946 B	-rwxr-xr-x	2023-07-28 23:46
which.debianutils	946 B	-rwxr-xr-x	2023-07-28 23:46
whiptail	26.75 KB	-rwxr-xr-x	2023-01-31 14:53
who	59.02 KB	-rwxr-xr-x	2022-09-20 15:27
whoami	38.86 KB	-rwxr-xr-x	2022-09-20 15:27
write	22.31 KB	-rwxr-xr-x	2024-11-21 20:01
wsrep_sst_backup	2.39 KB	-rwxr-xr-x	2025-02-19 00:56
wsrep_sst_common	66.5 KB	-rwxr-xr-x	2025-02-19 00:56
wsrep_sst_mariabackup	49.21 KB	-rwxr-xr-x	2025-02-19 00:56
wsrep_sst_mysqldump	8.04 KB	-rwxr-xr-x	2025-02-19 00:56
wsrep_sst_rsync	29.7 KB	-rwxr-xr-x	2025-02-19 00:56
wsrep_sst_rsync_wan	29.7 KB	-rwxr-xr-x	2025-02-19 00:56
x86_64	26.58 KB	-rwxr-xr-x	2024-11-21 20:01
x86_64-linux-gnu-addr2line	23.14 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-ar	51.17 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-as	897.41 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-c++filt	18.51 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-cpp	1.24 MB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-cpp-12	1.24 MB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-dwp	1.79 MB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-elfedit	35.03 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-g++	1.25 MB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-g++-12	1.25 MB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcc	1.24 MB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcc-12	1.24 MB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcc-ar	34.54 KB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcc-ar-12	34.54 KB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcc-nm	34.54 KB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcc-nm-12	34.54 KB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcc-ranlib	34.54 KB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcc-ranlib-12	34.54 KB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcov	720.16 KB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcov-12	720.16 KB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcov-dump	568.02 KB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcov-dump-12	568.02 KB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcov-tool	588.09 KB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcov-tool-12	588.09 KB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gold	2.99 MB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-gp-archive	159.06 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-gp-collect-app	175.27 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-gp-display-html	578.29 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-gp-display-src	150.81 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-gp-display-text	257.3 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-gprof	108.35 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-gprofng	146.59 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-ld	1.27 MB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-ld.bfd	1.27 MB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-ld.gold	2.99 MB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-lto-dump	30.47 MB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-lto-dump-12	30.47 MB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-nm	44.03 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-objcopy	155.66 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-objdump	362.56 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-pkg-config	44.04 KB	-rwxr-xr-x	2023-01-22 11:06
x86_64-linux-gnu-pkgconf	44.04 KB	-rwxr-xr-x	2023-01-22 11:06
x86_64-linux-gnu-python3-config	3 KB	-rwxr-xr-x	2024-11-30 21:22
x86_64-linux-gnu-python3.11-config	3 KB	-rwxr-xr-x	2024-11-30 21:22
x86_64-linux-gnu-ranlib	51.17 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-readelf	751.38 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-size	26.86 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-strings	30.98 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-strip	155.7 KB	-rwxr-xr-x	2023-01-14 17:24
xargs	70.45 KB	-rwxr-xr-x	2023-01-08 18:07
xauth	51.5 KB	-rwxr-xr-x	2023-01-24 16:29
xdg-user-dir	234 B	-rwxr-xr-x	2022-09-26 14:37
xdg-user-dirs-update	26.16 KB	-rwxr-xr-x	2022-09-26 14:37
xgettext	292.78 KB	-rwxr-xr-x	2023-02-26 15:20
xsubpp	5.05 KB	-rwxr-xr-x	2023-11-25 20:59
xz	82.7 KB	-rwxr-xr-x	2025-04-03 19:55
xzcat	82.7 KB	-rwxr-xr-x	2025-04-03 19:55
xzcmp	7.25 KB	-rwxr-xr-x	2025-04-03 19:55
xzdiff	7.25 KB	-rwxr-xr-x	2025-04-03 19:55
xzegrep	10.09 KB	-rwxr-xr-x	2025-04-03 19:55
xzfgrep	10.09 KB	-rwxr-xr-x	2025-04-03 19:55
xzgrep	10.09 KB	-rwxr-xr-x	2025-04-03 19:55
xzless	1.77 KB	-rwxr-xr-x	2025-04-03 19:55
xzmore	2.14 KB	-rwxr-xr-x	2025-04-03 19:55
yes	38.83 KB	-rwxr-xr-x	2022-09-20 15:27
ypdomainname	22.15 KB	-rwxr-xr-x	2022-12-19 13:33
zcat	1.94 KB	-rwxr-xr-x	2022-04-10 02:22
zcmp	1.64 KB	-rwxr-xr-x	2022-04-10 02:22
zdiff	6.31 KB	-rwxr-xr-x	2022-04-10 02:22
zdump	22.52 KB	-rwxr-xr-x	2025-03-06 22:46
zegrep	29 B	-rwxr-xr-x	2022-04-10 02:22
zfgrep	29 B	-rwxr-xr-x	2022-04-10 02:22
zforce	2.03 KB	-rwxr-xr-x	2022-04-10 02:22
zgrep	7.91 KB	-rwxr-xr-x	2022-04-10 02:22
zip	212.27 KB	-rwxr-xr-x	2023-02-19 18:00
zipcloak	92.48 KB	-rwxr-xr-x	2023-02-19 18:00
zipdetails	68.55 KB	-rwxr-xr-x	2023-11-25 20:59
zipgrep	2.89 KB	-rwxr-xr-x	2023-02-19 18:02
zipinfo	175.05 KB	-rwxr-xr-x	2023-02-19 18:02
zipnote	84.16 KB	-rwxr-xr-x	2023-02-19 18:00
zipsplit	88.19 KB	-rwxr-xr-x	2023-02-19 18:00
zless	2.15 KB	-rwxr-xr-x	2022-04-10 02:22
zmore	1.8 KB	-rwxr-xr-x	2022-04-10 02:22
znew	4.47 KB	-rwxr-xr-x	2022-04-10 02:22
zstd	1.22 MB	-rwxr-xr-x	2023-03-18 20:58
zstdcat	1.22 MB	-rwxr-xr-x	2023-03-18 20:58
zstdgrep	3.78 KB	-rwxr-xr-x	2023-03-18 20:58
zstdless	197 B	-rwxr-xr-x	2023-03-18 20:58
zstdmt	1.22 MB	-rwxr-xr-x	2023-03-18 20:58

Rename

#!/usr/bin/perl
#
# $Id: mytop,v 1.99-maria6 2019/10/22 14:53:51 jweisbuch Exp $

=pod

=head1 NAME

mytop - display MariaDB/MySQL server performance info like `top'

=cut

## most of the POD is at the bottom of the file

use 5.005;
use strict;
use warnings;
use DBI;
use Getopt::Long;
use Socket;
use List::Util qw(min max);
use File::Basename;

$main::VERSION = "1.99-maria6";
my $path_for_script = dirname($0);

$| = 1;
$0 = 'mytop';

my $WIN = ($^O eq 'MSWin32') ? 1 : 0;

## Test for color support.

eval { require Term::ANSIColor; };

my $HAS_COLOR = $@ ? 0 : 1;

$HAS_COLOR = 0 if $WIN;

## Test of Time::HiRes support

eval { require Time::HiRes };

my $HAS_TIME = $@ ? 0 : 1;

my $debug = 0;

## Try to lower our priority (which, who, pri)

setpriority(0,0,10) unless $WIN;

## Prototypes

sub Clear();
sub GetData();
sub GetQPS();
sub FullQueryInfo($);
sub Explain($);
sub PrintTable(@);
sub PrintHelp();
sub Sum(@);
sub commify($);
sub make_short($);
sub Hashes($);
sub Execute($);
sub StringOrRegex($);
sub GetInnoDBStatus();
sub GetCmdSummary();
sub GetShowVariables();
sub GetShowStatus();
sub cmd_s;
sub cmd_S;
sub cmd_q;

## Default Config Values

my %config = (
    batchmode     => 0,
    color         => 1,
    db            => '',
    database      => '',
    delay         => 5,
    filter_user   => qr/.?/,
    filter_db     => qr/.?/,
    filter_host   => qr/.?/,
    filter_state  => qr/.?/,
    header        => 1,
    help          => 0,
    host          => 'localhost',
    idle          => 1,
    long          => 120,
    long_nums     => 0,
    mode          => 'top',
    prompt        => 0,
    pass          => '',
    password      => '',
    port          => 3306,
    resolve       => 0,
    slow          => 10,        ## slow query time
    socket        => '',
    sort          => 1,         ## default or reverse sort ("s")
    user          => 'root',
    fullqueries   => 0,         ## shows untruncated queries
    usercol_width => 8,         ## User column width
    dbcol_width   => 9,         ## DB column width
    hide_progress => 0          ## hide the "%" column when available
);

my %qcache = ();    ## The query cache--used for full query info support.
my %ucache = ();    ## The user cache--used for full killing by user
my %dbcache = ();   ## The db cache.  This should be merged at some point.
my %statcache = (); ## The show status cache for GetShowStatus()

my (%STATUS, %OLD_STATUS); # header stuff.

my $CLEAR = $WIN ? '': `clear`;

## Term::ReadKey values

my $RM_RESET   = 0;
my $RM_NOBLKRD = 3; ## using 4 traps Ctrl-C :-(

## Add options from .my.cnf first

my $my_print_defaults;
if (!defined($my_print_defaults=my_which("my_print_defaults")))
{
  print "Warning: Can't find my_print_defaults. Please add it to your PATH!\n";
  exit(1);
}

unshift @ARGV, split "\n", `$my_print_defaults client mytop`;

## Read the user's config file, if it exists.

my $config = "$ENV{HOME}/.mytop";

if (-e $config)
{
    if (open CFG, "<$config")
    {
        while (<CFG>)
        {
            next if /^\s*($|#)/;  ## skip blanks and comments

chomp;

if (/(\S+)\s*=\s*(.*\S)/)
            {
                my ($k, $v) = ($1, $2);
                if ($k =~ /^filter_/i) {
                  $config{lc $k} = StringOrRegex($v) if exists $config{lc $k};
                } else {
                  $config{lc $k} = $v if exists $config{lc $k};
                }
            }
        }
        close CFG;
    }
    ## map database/password onto db/pass
    ## short version gets precedence for historical reasons
    $config{'db'} = $config{'database'} unless $config{'db'};
    $config{'pass'} = $config{'password'} unless $config{'pass'};
}

## Command-line args.

use vars qw($opt_foo);

Getopt::Long::Configure('no_ignore_case', 'bundling');

GetOptions(
    "color!"              => \$config{color},
    "user|u=s"            => \$config{user},
    "pass|password|p=s"   => \$config{pass},
    "database|db|d=s"     => \$config{db},
    "host|h=s"            => \$config{host},
    "port|P=i"            => \$config{port},
    "socket|S=s"          => \$config{socket},
    "delay|s=i"           => \$config{delay},
    "batch|batchmode|b"   => \$config{batchmode},
    "header!"             => \$config{header},
    "idle|i!"             => \$config{idle},
    "resolve|r!"          => \$config{resolve},
    "prompt!"             => \$config{prompt},
    "long=i"              => \$config{long},
    "long_nums!"          => \$config{long_nums},
    "mode|m=s"            => \$config{mode},
    "slow=i"              => \$config{slow},
    "sort=s"              => \$config{sort},
    "fullqueries|L!"      => \$config{fullqueries},
    "usercol_width=i"     => \$config{usercol_width},
    "dbcol_width=i"       => \$config{dbcol_width},
    "hide_progress|a!"    => \$config{hide_progress}
);

## User may have put the port with the host.

if ($config{host} =~ s/:(\d+)$//)
{
    $config{port} = $1;
}

## Don't use Term::ReadKey unless running interactively.

if (not $config{batchmode})
{
    require Term::ReadKey;
    Term::ReadKey->import();
}

## User may want to disable color.

if ($HAS_COLOR and not $config{color})
{
    $HAS_COLOR = 0;
}

if ($HAS_COLOR)
{
    import Term::ANSIColor ':constants';
}
else
{
    *RESET  = sub { };
    *YELLOW = sub { };
    *RED    = sub { };
    *MAGENTA  = sub { };
    *GREEN  = sub { };
    *BLUE   = sub { };
    *WHITE  = sub { };
    *BOLD   = sub { };
}

my $RESET  = RESET()   || '';
my $YELLOW = YELLOW()  || '';
my $RED    = RED()     || '';
my $MAGENTA  = MAGENTA()   || '';
my $GREEN  = GREEN()   || '';
my $BLUE   = BLUE()    || '';
my $WHITE  = WHITE()   || '';
my $BOLD   = BOLD()    || '';

## Connect

my $dsn;

## Socket takes precedence.
my $prefix= 'mysql';
if (eval {DBI->install_driver("MariaDB")}) {
  $dsn = "DBI:MariaDB:database=$config{db};mariadb_read_default_group=mytop;";
  $prefix= 'mariadb'
} else {
  $dsn = "DBI:mysql:database=$config{db};mysql_read_default_group=mytop;";
}

if ($config{socket} and -S $config{socket})
{
  $dsn .= "${prefix}_socket=$config{socket}";
}
else
{
    $dsn .= "host=$config{host};port=$config{port}";
}

if ($config{prompt})
{
    print "Password: ";
    ReadMode(2);
    chomp($config{pass} = <STDIN>);
    ReadMode(0);
    print "\n";
}

my $dbh = DBI->connect($dsn, $config{user}, $config{pass},
                       { PrintError => 0 });

if (not ref $dbh)
{
    my $Error = <<EODIE
Cannot connect to MariaDB/MySQL server. Please check the:

* database you specified "$config{db}" (default is "")
  * username you specified "$config{user}" (default is "root")
  * password you specified "$config{pass}" (default is "")
  * hostname you specified "$config{host}" (default is "localhost")
  * port you specified "$config{port}" (default is 3306)
  * socket you specified "$config{socket}" (default is "")

The options my be specified on the command-line or in a ~/.mytop or
~/.my.cnf config file. See the manual (perldoc mytop) for details.

Here's the exact error from DBI. It might help you debug:

$DBI::errstr

EODIE
;

die $Error;

}

ReadMode($RM_RESET) unless $config{batchmode};

## Get static data

my $db_version;
my $db_release;
my $server = "MySQL";
my $have_query_cache;

my @variables = Hashes("SHOW VARIABLES");

foreach (@variables)
{
    if ($_->{Variable_name} eq "version")
    {
        $db_version = $_->{Value};
        $db_version =~ /^(\d+)/;
        $db_release = $1;
        $server = "MariaDB" if ($db_version =~ /maria/i);
        # Get the version number only
        $db_version = $1 if($db_version =~ m/(.*?)-/);
        next;
    }
    if ($_->{Variable_name} eq "have_query_cache")
    {
        if ($_->{Value} ne 'NO')
        {
            $have_query_cache = 1;
        }
        else
        {
            $have_query_cache = 0;
        }
        next;
    }
}

my ($has_is_processlist, $has_time_ms, $has_progress);
$has_is_processlist = $has_time_ms = $has_progress = 0;

## Check if the server has the INFORMATION_SCHEMA.PROCESSLIST table
## for backward compatibility
$has_is_processlist = Execute("SELECT /*mytop*/ 1 FROM INFORMATION_SCHEMA.TABLES
                               WHERE TABLE_SCHEMA = 'information_schema' AND
                               TABLE_NAME = 'PROCESSLIST';")->rows;
if ($has_is_processlist == 1)
{
    ## Check if the server has the TIME_MS column on the I_S.PROCESSLIST table
    ## If it is the case, it will fetch the query time with decimal precision
    ## for queries that has been running for less than 10k seconds
    $has_time_ms = Execute("SELECT /*mytop*/ 1 FROM INFORMATION_SCHEMA.COLUMNS
                            WHERE TABLE_SCHEMA = 'information_schema' AND
                            TABLE_NAME = 'PROCESSLIST' AND
                            COLUMN_NAME = 'TIME_MS';")->rows;
    if ($has_time_ms == 1)
    {
        ## Check if the server has the STAGE column on the I_S.PROCESSLIST
        ## table (MariaDB) to retreive query completion information
        $has_progress = Execute("SELECT /*mytop*/ 1 FROM INFORMATION_SCHEMA.COLUMNS
                                WHERE TABLE_SCHEMA = 'information_schema' AND
                                TABLE_NAME = 'PROCESSLIST' AND
                                COLUMN_NAME = 'STAGE';")->rows;
    }
}

#########################################################################
##
## The main loop
##
#########################################################################

ReadMode($RM_NOBLKRD)  unless $config{batchmode};

while (1)
{
    my $key;

if ($config{mode} eq 'qps')
    {
        GetQPS();
        $key = ReadKey(1);

next unless $key;

if ($key =~ /t/i)
        {
            $config{mode} = 'top';
        }
        if ($key =~ /q/)
        {
            cmd_q();
        }
        next;
    }
    if ($config{mode} eq 'top')
    {
        GetData();
        last if $config{batchmode};
        $key = ReadKey($config{delay});
        next unless $key;
    }
    elsif ($config{mode} eq 'cmd')
    {
        GetCmdSummary();
        last if $config{batchmode};
        $key = ReadKey($config{delay});
        next unless $key;
    }
    elsif ($config{mode} eq 'innodb')
    {
        GetInnoDBStatus();
        last if $config{batchmode};
        print "InnoDB Status [hit t to exit this mode or q to exit the application]\n";
        $key = ReadKey($config{delay});
        next unless $key;
    }
    elsif ($config{mode} eq 'status')
    {
        GetShowStatus();
        last if $config{batchmode};
        $key = ReadKey($config{delay});
        next unless $key;
    }

##
    ## keystroke command processing (if we get this far)
    ##

if ($key eq '!')
    {
        Execute("STOP /*mytop*/ SLAVE;");
        Execute("SET /*mytop*/ GLOBAL sql_slave_skip_counter=1");
        Execute("START /*mytop*/ SLAVE");
    }

# t - top

if ($key =~ /t/i)
    {
        $config{mode} = 'top';
    }

## q - quit

if ($key eq 'q')
    {
        cmd_q();
    }

if ($key eq 'D')
    {
        require Data::Dumper;
        print Data::Dumper::Dumper([\%config]);
        ReadKey(0);
    }

## l - change long running hightling

if ($key eq 'l')
    {
        cmd_l();
        next;
    }

## m - mode switch to qps

if ($key eq 'm')
    {
        $config{mode} = 'qps';
        Clear() unless $config{batchmode};
        print "Queries Per Second [hit t to exit this mode or q to exit the application]\n";
        next;
    }

## c - mode switch to command summary

if ($key eq 'c')
    {
        $config{mode} = 'cmd';
        Clear() unless $config{batchmode};
        print "Command Summary\n";
        next;
    }

## C - change Color on and off

if ($key eq 'C')
    {
        if ($HAS_COLOR)
        {
            $HAS_COLOR = 0;
        }
        else
        {
            $HAS_COLOR = 1;
        }
    }

## s - seconds of delay

if ($key eq 's')
    {
        cmd_s();
        next;
    }

if ($key eq 'S')
    {
        cmd_S();
        next;
    }

## R - resolve hostnames
    if ($key eq 'R')
    {
        if ($config{resolve})
        {
            $config{resolve} = 0;
        }
        else
        {
            $config{resolve} = 1;
        }
    }

## t - username based filter

if ($key eq 't')
    {
        ReadMode($RM_RESET);
        print RED(), "Which state (blank for all, /.../ for regex): ", RESET();
        $config{filter_state} = StringOrRegex(ReadLine(0));
        ReadMode($RM_NOBLKRD);
        next;
    }

## u - username based filter

if ($key eq 'u')
    {
        ReadMode($RM_RESET);
        print RED(), "Which user (blank for all, /.../ for regex): ", RESET();
        $config{filter_user} = StringOrRegex(ReadLine(0));
        ReadMode($RM_NOBLKRD);
        next;
    }

## d - database name based filter

if ($key eq 'd')
    {
        ReadMode($RM_RESET);
        print RED(), "Which database (blank for all, /.../ for regex): ",
            RESET();
        $config{filter_db} = StringOrRegex(ReadLine(0));
        ReadMode($RM_NOBLKRD);
        next;
    }

## h - hostname based filter

if ($key eq 'h')
    {
        ReadMode($RM_RESET);
        print RED(), "Which hostname (blank for all, /.../ for regex): ",
            RESET();
        $config{filter_host} = StringOrRegex(ReadLine(0));
        ReadMode($RM_NOBLKRD);
        next;
    }

## E - Show full Replication Error

if ($key eq 'E')
    {
        my ($data) = Hashes('SHOW /*mytop*/ SLAVE STATUS');
        Clear();
        print "Error is: $data->{Last_Error}\n";
        print RED(), "-- paused. press any key to resume --", RESET();
        ReadKey(0);
        next;
    }
    ## F - remove all filters

if ($key eq 'F')
    {
        $config{filter_host}  = qr/.?/;
        $config{filter_db}    = qr/.?/;
        $config{filter_user}  = qr/.?/;
        $config{filter_state} = qr/.?/;
        print RED(), "-- display unfiltered --", RESET();
        sleep 1;
        next;
    }

## p - pause

if ($key eq 'p')
    {
        print RED(), "-- paused. press any key to resume --", RESET();
        ReadKey(0);
        next;
    }

## i - idle toggle

if ($key =~ /i/)
    {
        if ($config{idle})
        {
            $config{idle} = 0;
            $config{sort} = 1;
            print RED(), "-- idle (sleeping) processed filtered --", RESET();
            sleep 1;
        }
        else
        {
            $config{idle} = 1;
            $config{sort} = 0;
            print RED(), "-- idle (sleeping) processed unfiltered --", RESET();
            sleep 1;
        }
    }

## I - InnoDB status

if ($key =~ 'I')
    {
        $config{mode} = 'innodb';
        Clear() unless $config{batchmode};
        print "InnoDB Status\n";
        next;
    }

## o - sort order

if ($key =~ /o/)
    {
        if ($config{sort})
        {
            $config{sort} = 0;
            print RED(), "-- sort order reversed --", RESET();
            sleep 1;
        }
        else
        {
            $config{sort} = 1;
            print RED(), "-- sort order reversed --", RESET();
            sleep 1;
        }
    }

## ? - help

if ($key eq '?')
    {
        Clear();
        PrintHelp();
        ReadKey(0);
        next;
    }

## k - kill

if ($key eq 'k')
    {
        ReadMode($RM_RESET);

print RED(), "Thread id to kill: ", RESET();
        my $id = ReadLine(0);

$id =~ s/\s//g;

if ($id =~ /^\d+$/)
        {
            Execute("KILL /*mytop*/ $id");
        }
        else
        {
            print RED(), "-- invalid thread id --", RESET();
            sleep 1;
        }

ReadMode($RM_NOBLKRD);
        next;
    }

## K - kill based on a username
    if ($key =~ /K/)
    {
        ReadMode($RM_RESET);

print RED(), "User to kill: ", RESET();
        my $user = ReadLine(0);

$user =~ s/\s//g;

if ($user =~ /^\S+$/)
        {
            for my $pid (keys %ucache)
            {
                next unless $ucache{$pid} eq $user;
                Execute("KILL /*mytop*/ $pid");
                select(undef, undef, undef, 0.2);
            }
        }
        else
        {
            print RED(), "-- invalid thread id --", RESET();
            sleep 1;
        }

ReadMode($RM_NOBLKRD);
    }

## f - full info

if ($key =~ /f/)
    {
        ReadMode($RM_RESET);
        print RED(), "Full query for which thread id: ", RESET();
        my $id = ReadLine(0);
        chomp $id;
        FullQueryInfo($id);
        ReadMode($RM_NOBLKRD);
        print RED(), "-- paused. press any key to resume or (e) to explain --",
            RESET();
        my $key = ReadKey(0);

if ($key eq 'e')
        {
            Explain($id);
            print RED(), "-- paused. press any key to resume --", RESET();
            ReadKey(0);
        }

next;
    }

## e - explain

if ($key =~ /e/)
    {
        ReadMode($RM_RESET);
        print RED(), "Explain which query (id): ", RESET();
        my $id = ReadLine(0);
        chomp $id;
        Explain($id);
        ReadMode($RM_NOBLKRD);
        print RED(), "-- paused. press any key to resume --", RESET();
        ReadKey(0);
        next;
    }

## r - reset status counters

if ($key =~ /r/)
    {
        Execute("FLUSH /*mytop*/ STATUS");
        print RED(), "-- counters reset --", RESET();
        sleep 1;
        next;
    }

## H - header toggle

if ($key eq 'H')
    {
        if ($config{header})
        {
            $config{header} = 0;
        }
        else
        {
            $config{header}++;
        }
    }

## # - magic debug key

if ($key eq '#')
    {
        $debug = 1;
    }

if ($key eq 'V')
    {
        GetShowVariables();
        print RED(), "-- paused. press any key to resume --", RESET();
        ReadKey(0);
    }

## M - switch to SHOW STATUS mode

if ($key eq 'M')
    {
        $config{mode} = 'status';
    }

## L - full queries toggle

if ($key eq 'L')
    {
        if ($config{fullqueries})
        {
            $config{fullqueries} = 0;
            print RED(), "-- full queries OFF --", RESET();
            sleep 1;
        }
        else
        {
            $config{fullqueries} = 1;
            print RED(), "-- full queries ON --", RESET();
            sleep 1;
        }
    }

## w - change columns width for the "User" and "Database" columns

if ($key eq 'w')
    {
        ReadMode($RM_RESET);
        print RED(), "Width for the 'User' column (the actual value is ".
                      $config{usercol_width}."): ";
        my $readWidth = ReadLine(0);
        chomp($readWidth);
        if (defined($readWidth) && $readWidth ne "")
        {
            if ($readWidth > 4 && $readWidth < 60)
            {
                $config{usercol_width} = $readWidth;
            }
            else
            {
                print RED(), "-- Invalid value ($readWidth), the previous value".
                             "has been kept, press a key to resume --";
                ReadKey(0);
            }
        }
        print RESET(), RED(), "Width for the 'DB' column (the actual value is ".
                               $config{dbcol_width}."): ", RESET();
        $readWidth = ReadLine(0);
        chomp($readWidth);
        if (defined($readWidth) && $readWidth ne "")
        {
            if ($readWidth > 2 && $readWidth < 60)
            {
                $config{dbcol_width} = $readWidth
            }
            else
            {
                print RED(), "-- Invalid value ($readWidth), the previous value".
                             "has been kept, press a key to resume --", RESET();
                ReadKey(0);
            }
        }
        undef $readWidth;
        ReadMode($RM_NOBLKRD);
        next;
    }

## a - progress column toggle (the column is only displayed
    ##     if progress information are available from the processlist)

if ($key eq 'a')
    {
        if ($config{hide_progress})
        {
            $config{hide_progress} = 0;
            print RED(), "-- progress display ON --", RESET();
            sleep 1;
        }
        else
        {
            $config{hide_progress} = 1;
            print RED(), "-- progress display OFF --", RESET();
            sleep 1;
        }
    }

}

ReadMode($RM_RESET) unless $config{batchmode};

exit;

#######################################################################

sub Clear()
{
    if (not $WIN)
    {
        print "$CLEAR"
    }
    else
    {
        print "\n" x 90; ## dumb hack for now. Anyone know how to
                         ## clear the screen in dos window on a Win32
                         ## system??
    }
}

my $last_time;

sub GetData()
{
    ## Get terminal info
    my $now_time;
    %qcache = ();  ## recycle memory
    %dbcache = ();

my ($width, $height, $wpx, $hpx, $lines_left);

if (not $config{batchmode})
    {
        ($width, $height, $wpx, $hpx) = GetTerminalSize();
        $lines_left = $height - 2;
    }
    else
    {
        $height = 999_999;     ## I hope you don't have more than that!
        $lines_left = 999_999;
        $width = 80;
    }

##
    ## Header stuff.
    ##
    if ($config{header})
    {
        my @recs = "";
        if ($db_release > 4)
        {
            @recs = Hashes("SHOW /*mytop*/ GLOBAL STATUS");
        }
        else
        {
           @recs = Hashes("SHOW /*mytop*/ STATUS");
        }

## if the server died or we lost connectivity
        if (not @recs)
        {
            ReadMode($RM_RESET);
            exit 1;
        }

## get high-res or low-res time
        my ($t_delta);

if ($HAS_TIME)
        {
            $now_time = Time::HiRes::gettimeofday();
        }
        else
        {
            $now_time = time;
        }

if ($last_time and $last_time != $now_time)
        {
          $t_delta = $now_time - $last_time;
        }

%OLD_STATUS = %STATUS;
        # Set some status that may not exist in all versions
        $STATUS{Handler_tmp_write} = 0;
        $STATUS{Handler_tmp_update} = 0;
        $STATUS{Rows_tmp_read} = 0;

foreach my $ref (@recs)
        {
            my $key = $ref->{Variable_name};
            my $val = $ref->{Value};

$STATUS{$key} = $val;
        }

## Compute Key Cache Hit Stats

$STATUS{Key_read_requests} ||= 1; ## can't divide by zero next

my $cache_hits_percent = (100-($STATUS{Key_reads}/$STATUS{Key_read_requests}) * 100);
        $cache_hits_percent = sprintf("%2.2f",$cache_hits_percent);

## Query Cache info for <= Ver. 4.1
        ##
        ## mysql> show status like 'qcache%';
        ## +-------------------------+----------+
        ## | Variable_name           | Value    |
        ## +-------------------------+----------+
        ## | Qcache_queries_in_cache | 81       |
        ## | Qcache_inserts          | 4961668  |
        ## | Qcache_hits             | 1374170  |
        ## | Qcache_not_cached       | 5656249  |
        ## | Qcache_free_memory      | 33164800 |
        ## | Qcache_free_blocks      | 2        |
        ## | Qcache_total_blocks     | 168      |
        ## +-------------------------+----------+
        ##
        ## Query Cache info for => Ver. 5.0
        ##
        ## mysql> show status like 'qcache%';
        ## +-------------------------+------------+
        ## | Variable_name           | Value      |
        ## +-------------------------+------------+
        ## | Qcache_free_blocks      | 37652      |
        ## | Qcache_free_memory      | 110289712  |
        ## | Qcache_hits             | 1460617356 |
        ## | Qcache_inserts          | 390563495  |
        ## | Qcache_lowmem_prunes    | 6414172    |
        ## | Qcache_not_cached       | 93002420   |
        ## | Qcache_queries_in_cache | 66558      |
        ## | Qcache_total_blocks     | 192031     |
        ## +-------------------------+------------+

my $query_cache_hits             = 0;
        my $query_cache_hits_per_sec     = 0;
        my $now_query_cache_hits_per_sec = 0;

if ($have_query_cache)
        {
            $query_cache_hits = $STATUS{Qcache_hits};
            $query_cache_hits_per_sec = $STATUS{Qcache_hits} / $STATUS{Uptime};

if (defined $last_time and $last_time != $now_time)
            {
                my $q_delta = $STATUS{Qcache_hits} - $OLD_STATUS{Qcache_hits};
                $now_query_cache_hits_per_sec = sprintf "%.2f", $q_delta / $t_delta;
            }
        }

my $l;
        if (-e "/proc/loadavg")
        {
            ## To avoid warnings if the OS is not Linux
            open (my $fh, "<", "/proc/loadavg");
            ## Only the first 3 values are interresting
            $l = join(" ", (split /\s+/, <$fh>)[0..2]);
            close $fh;
        }

$last_time = $now_time;

## Server Uptime in meaningful terms...

my $time         = $STATUS{Uptime};
        my ($d,$h,$m,$s) = (0, 0, 0, 0);

$d += int($time / (60*60*24)); $time -= $d * (60*60*24);
        $h += int($time / (60*60));    $time -= $h * (60*60);
        $m += int($time / (60));       $time -= $m * (60);
        $s += int($time);

my $uptime = sprintf("%d+%02d:%02d:%02d", $d, $h, $m, $s);

## Queries per second...

my $avg_queries_per_sec  = sprintf("%.2f", $STATUS{Questions} / $STATUS{Uptime});
        my $num_queries          = $STATUS{Questions};

my @t = localtime(time);

my $current_time = sprintf "[%02d:%02d:%02d]", $t[2], $t[1], $t[0];

my $host_width = length("$server $db_version on $config{host}");
        my $up_width   = $width - $host_width - 1;
        Clear() unless $config{batchmode};
        print RESET();

printf "%-.${host_width}s %${up_width}s\n",
               "$server $db_version on $config{host}",
               defined($l) ? "load ($l) up $uptime $current_time" : "up $uptime $current_time";
        $lines_left--;

printf " Queries: %-7s  qps: %4.0f Slow: %7s         Se/In/Up/De(%%):    %02.0f/%02.0f/%02.0f/%02.0f\n",
               make_short( $STATUS{Questions} ),  # q total
               $STATUS{Questions} / $STATUS{Uptime},  # qps, average
               make_short( $STATUS{Slow_queries} ),    # slow

# hmm. a Qcache hit is really a select and should be counted.
               100 * ($STATUS{Com_select} + ($STATUS{Qcache_hits}||0) )    / $STATUS{Questions},
               100 * ($STATUS{Com_insert} +  $STATUS{Com_replace} ) / $STATUS{Questions},
               100 * ($STATUS{Com_update} )  / $STATUS{Questions},
               100 * $STATUS{Com_delete} / $STATUS{Questions};

$lines_left--;

if ($t_delta)
        {
          my $q_diff = ( $STATUS{Questions} - $OLD_STATUS{Questions} );
#         print("q_diff: $STATUS{Questions} - $OLD_STATUS{Questions}  / $t_delta = $q_diff\n");

printf(" Sorts: %6.0f qps now: %4.0f Slow qps: %3.1f  Threads: %4.0f (%4.0f/%4.0f) %02.0f/%02.0f/%02.0f/%02.0f\n",
                 ( $STATUS{Sort_rows} - $OLD_STATUS{Sort_rows} ) / $t_delta,

( $STATUS{Questions} - $OLD_STATUS{Questions} ) / $t_delta,
                 ( # slow now (qps)
                  ($STATUS{Slow_queries} ) ?
                  ( $STATUS{Slow_queries} - $OLD_STATUS{Slow_queries} ) / $t_delta :
                  0
                 ),
                 $STATUS{Threads_connected},
                 $STATUS{Threads_running},
                 $STATUS{Threads_cached},

(100 * ($STATUS{Com_select} - $OLD_STATUS{Com_select} +
                         ($STATUS{Qcache_hits}||0) - ($OLD_STATUS{Qcache_hits}||0)
                        ) ) / ($q_diff ),
                 (100 * ($STATUS{Com_insert} - $OLD_STATUS{Com_insert} +
                         $STATUS{Com_replace} - $OLD_STATUS{Com_replace}
                        ) ) / ($q_diff ),
                 (100 * ($STATUS{Com_update} - $OLD_STATUS{Com_update}) ) / ($q_diff ),
                 (100 * ($STATUS{Com_delete} - $OLD_STATUS{Com_delete}) ) / ($q_diff ),
                 );
        }
        else
        {
            print "\n";
        }
        $lines_left--;

if ($have_query_cache and $STATUS{Com_select} and $query_cache_hits)
        {
          printf(" Cache Hits: %-5s Hits/s: %4.1f Hits now: %5.1f  Ratio: ",
                 make_short($STATUS{Qcache_hits}),        # cache hits
                 $STATUS{Qcache_hits} / $STATUS{Uptime}, # hits / sec
                 ($t_delta) ?  ($STATUS{Qcache_hits} - $OLD_STATUS{Qcache_hits}) / $t_delta : 0,  # Hits Now
                 );

my ($Ratio) =  100 * ($STATUS{Qcache_hits})  / ($STATUS{Qcache_hits} + $STATUS{Com_select} );
          if ($HAS_COLOR)
          {
                print YELLOW() if ($Ratio < 80.0);
                print RED() if ($Ratio < 50.0);
                print MAGENTA() if ($Ratio < 20.0);
          }
          printf("%4.1f%% ",$Ratio);
          if ($HAS_COLOR)
          {
                print RESET();
          }

print " Ratio now: ";
          my ($Ratio_now) = ($t_delta) ?   # ratio now
                 100 * ($STATUS{Qcache_hits} - $OLD_STATUS{Qcache_hits} ) /
                 ( ($STATUS{Com_select} + $STATUS{Qcache_hits} -
                    ($OLD_STATUS{Qcache_hits} + $OLD_STATUS{Com_select})
                   ) || 1) : 0;
          if ($HAS_COLOR)
          {
                print GREEN() if ($Ratio_now >= 80.0);
                print YELLOW() if ($Ratio_now < 80.0);
                print RED() if ($Ratio_now < 50.0);
                print MAGENTA() if ($Ratio_now < 20.0);
          }
          printf("%4.1f%% \n",$Ratio_now);
          if ($HAS_COLOR)
          {
                print RESET();
          }
          $lines_left--;
        }

if ($t_delta)
        {
          my $rows_read;
          if (defined($STATUS{Rows_read}))
          {
            $rows_read= $STATUS{Rows_read} - $OLD_STATUS{Rows_read};
          }
          else
          {
            $rows_read=
              ($STATUS{Handler_read_first} + $STATUS{Handler_read_key} +
               $STATUS{Handler_read_next} + $STATUS{Handler_read_prev} +
               $STATUS{Handler_read_rnd} + $STATUS{Handler_read_rnd_next} -
               $OLD_STATUS{Handler_read_first} - $OLD_STATUS{Handler_read_key} -
               $OLD_STATUS{Handler_read_next} - $OLD_STATUS{Handler_read_prev} -
               $OLD_STATUS{Handler_read_rnd} - $OLD_STATUS{Handler_read_rnd_next});
          }
          printf(" Handler: (R/W/U/D) %5d/%5d/%5d/%5d        Tmp: R/W/U: %5d/%5d/%5d\n",
                 $rows_read/$t_delta,
                 ($STATUS{Handler_write} - $OLD_STATUS{Handler_write}) /
                 $t_delta,
                 ($STATUS{Handler_update} - $OLD_STATUS{Handler_update}) /
                 $t_delta,
                 ($STATUS{Handler_delete} - $OLD_STATUS{Handler_delete}) /
                 $t_delta,
                 ($STATUS{Rows_tmp_read} - $OLD_STATUS{Rows_tmp_read}) /
                 $t_delta,
                 ($STATUS{Handler_tmp_write}
                 -$OLD_STATUS{Handler_tmp_write})/$t_delta,
                 ($STATUS{Handler_tmp_update} -
                 $OLD_STATUS{Handler_tmp_update})/$t_delta);
        }
        else
        {
            print "\n";
        }

$lines_left--;

printf(" MyISAM Key Cache Efficiency: %2.1f%%  Bps in/out: %5s/%5s   ",
               $cache_hits_percent,
               make_short($STATUS{Bytes_received} / $STATUS{Uptime} ),
               make_short($STATUS{Bytes_sent} / $STATUS{Uptime}));
        printf("Now in/out: %5s/%5s",
               make_short(($STATUS{Bytes_received} - $OLD_STATUS{Bytes_received}) / $t_delta ),
               make_short(($STATUS{Bytes_sent} - $OLD_STATUS{Bytes_sent}) / $t_delta ))
          if ($t_delta);
        print "\n";

$lines_left--;

my ($data) = Hashes('SHOW /*mytop*/ GLOBAL VARIABLES LIKE "read_only"');
        if ($data->{Value} ne "OFF")
        {
            print RED() if ($HAS_COLOR) ;
            print " ReadOnly";
            RESET() if ($HAS_COLOR);
        }

($data) = Hashes('SHOW /*mytop*/ SLAVE STATUS');
        if (defined($data->{Master_Host}))
        {
            if (defined($data->{Seconds_Behind_Master}))
            {
                if ($HAS_COLOR)
                {
                    print GREEN();
                    print YELLOW() if ($data->{Seconds_Behind_Master}  >  60);
                    print MAGENTA() if ($data->{Seconds_Behind_Master} > 360);
                }
            }
            print " Replication ";
            print "IO:$data->{Slave_IO_Running} ";
            print "SQL:$data->{Slave_SQL_Running} ";
            print RESET() if ($HAS_COLOR);

if (defined($data->{Seconds_Behind_Master}))
            {
                if ($HAS_COLOR)
                {
                    print GREEN();
                    print YELLOW() if ($data->{Seconds_Behind_Master}  >  60);
                    print MAGENTA() if ($data->{Seconds_Behind_Master} > 360);
                }
                print "Delay: $data->{Seconds_Behind_Master} sec.";
            }
            else
            {
                my $free = $width - 45;
                my $Err = substr $data->{Last_Error},0 ,$free;
                printf(" ERR: %-${free}s", $Err) if ($Err ne "");
            }
            print WHITE() if ($HAS_COLOR);
            print "\n";
            $lines_left--;
        }
        print "\n";
    }

if (not $config{batchmode} and not $config{header})
    {
        Clear();
        print RESET();
    }

##
    ## Threads
    ##

my $proc_cmd;  ## Query used to fetch the processlist
    my $time_format = "6d";

if ($has_is_processlist == 1)
    {
        if ($has_time_ms == 1)
        {
            $time_format = "6.6s";
            if ($has_progress == 1)
            {
                ## To have a computed value of "Progress" like the
                ## "SHOW PROCESSLIST" one, the Progress column of the query
                ## must be replaced by :
                ## "CASE WHEN Max_Stage < 2 THEN Progress ELSE
                ## (Stage-1)/Max_Stage*100+Progress/Max_Stage END AS Progress"
                $proc_cmd = "SELECT /*mytop*/ Id, User, Host, db, Command,
                             CASE WHEN TIME > 10000 THEN Time ELSE
                             ROUND(TIME_MS/1000, 1) END AS Time,
                             State, Info, Progress, Stage, Max_Stage
                             FROM INFORMATION_SCHEMA.PROCESSLIST
                             WHERE ID != CONNECTION_ID();";
            }
            else
            {
                $proc_cmd = "SELECT /*mytop*/ Id, User, Host, db, Command,
                             CASE WHEN TIME > 10000 THEN Time ELSE
                             ROUND(TIME_MS/1000, 1) END AS Time,
                             State, Info FROM INFORMATION_SCHEMA.PROCESSLIST
                             WHERE ID != CONNECTION_ID();";
           }
        }
        else
        {
            $proc_cmd = "SELECT /*mytop*/ Id, User, Host, db, Command, Time,
                         State, Info FROM INFORMATION_SCHEMA.PROCESSLIST
                         WHERE ID != CONNECTION_ID();";
        }
    }
    else
    {
        $proc_cmd = "SHOW /*mytop*/ FULL PROCESSLIST;";
    }

## Minimal width values for columns with a dynamic width
    if ($config{usercol_width} < 4) { $config{usercol_width} = 4; }
    if ($config{dbcol_width} < 2)   { $config{dbcol_width}   = 2; }

my @sz   = (9, $config{usercol_width}, 15, $config{dbcol_width}, 6, 6, 8);
    if ($has_progress == 1 && !$config{hide_progress}) { push @sz, 5; };
    my $used = scalar(@sz) + Sum(@sz);
    undef(@sz);

## If the terminal width <= 80, the state column will have a width of 6
    ## chars else it will be between 6 and 15 depending on the terminal width
    my $state = $width <= 80 ? 6 : int(min(6+($width-80)/3, 15));
    ## $free = The number of chars between the beginning of the "Query"
    ## column and the end of the line
    my $free = $width - $used - ($state - 6);
    my $format= "%9s %$config{usercol_width}s %15s %$config{dbcol_width}s %6s ";
    if ($has_progress == 1 && !$config{hide_progress}) { $format .= "%5s "; }
    $format .= "%6s %${state}s %-.${free}s\n";

my $format2 = "%9d %$config{usercol_width}.$config{usercol_width}s %15.15s %$config{dbcol_width}.$config{dbcol_width}s %${time_format} ";
    if ($has_progress == 1 && !$config{hide_progress}) { $format2 .= "%5.1f "; }
    $format2 .= "%6.6s %${state}.${state}s ";
    if ($config{fullqueries})
    {
        $format2 .= "%-${free}s\n";
    }
    else
    {
        $format2 .= "%-${free}.${free}s\n";
    }

print BOLD() if ($HAS_COLOR);

if ($has_progress == 1 && !$config{hide_progress})
    {
        printf $format,
            'Id','User','Host/IP','DB','Time', '%', 'Cmd', 'State', 'Query';
    }
    else
    {
        printf $format,
            'Id','User','Host/IP','DB','Time', 'Cmd', 'State', 'Query';
    }

print RESET() if ($HAS_COLOR);

## Id User Host DB
    if ($has_progress == 1 && !$config{hide_progress})
    {
        printf $format,
            '--','----','-------','--','----', '-', '---', '-----', '----------';
    }
    else
    {
        printf $format,
            '--','----','-------','--','----', '---', '-----', '----------';
    }

$lines_left -= 2;

my @data = Hashes($proc_cmd);

foreach my $thread (@data)
    {
        last if not $lines_left;

## Drop Domain Name, unless it looks like an IP address.  If
        ## it's an IP, we'll strip the port number because it's rarely
        ## interesting.

my $is_ip = 0;

if ($thread->{Host} =~ /^(\d{1,3}\.){3}(\d{1,3})(:\d+)?$/)
        {
            $thread->{Host} =~ s/:.*$//;
            $is_ip = 1;
        }
        else
        {
            $thread->{Host} =~ s/^([^.]+).*/$1/;
        }

## Otherwise, look up the IP (if resolve is set) and strip the
        ## name
        if ($is_ip and $config{resolve})
        {
            $thread->{Host} =~ s/:\d+$//;
            my $host = gethostbyaddr(inet_aton($thread->{Host}), AF_INET);
            if ($host)
            {
                ## Only the hostname part of the DNS is kept
                $host =~ s/^([^.]+).*/$1/;
            }
            $thread->{Host} = $host;
        }

## Fix possible undefs

$thread->{db}      ||= '';
        $thread->{Info}    ||= '';
        $thread->{Time}    ||= 0 ;
        $thread->{Id}      ||= 0 ;
        $thread->{User}    ||= '';
        $thread->{Command} ||= '';
        $thread->{Host}    ||= '';
        $thread->{State}   ||= "";
        $thread->{Progress} ||= 0;

## Alter double hyphen comments so they don't break
        ## the query when newlines are removed - http://freshmeat.net/users/jerjones
        $thread->{Info} =~ s~\s--(.*)$~ /* $1 */ ~mg;

## Normalize spaces -- mostly disabled for now.  This can
        ## break EXPLAIN if you try to explain a mangled query.  It
        ## may be re-enabled later as an option.

## Replace newlines and carriage returns with a space
        $thread->{Info} =~ tr/\n\r/ /;

## Leading space removal
        $thread->{Info} =~ s/^\s*//;

## Strip non printing control symbols
        $thread->{Info} =~ tr/[[:cntrl:]]//;

## Collpase whitespace
        $thread->{Info} =~ s/\s+/ /g;

## Trailing space removal
        $thread->{Info} =~ s/\s$//;

## Put the first letter of the query uppercase for a better readability
        ## with long State strings
        $thread->{Info} = ucfirst $thread->{Info};

## Stow it in the cache
        $qcache{$thread->{Id}}  = $thread->{Info};
        $dbcache{$thread->{Id}} = $thread->{db};
        $ucache{$thread->{Id}}  = $thread->{User};

## If Progress information is available and a multi-stage query is
        ## running, the actual stage and the total number of stages of the
        ## thread are shown at the beginning of the State column
        if ($has_progress == 1 && $thread->{Max_Stage} && $thread->{Max_Stage} > 1)
        {
            $thread->{State} = $thread->{Stage}."/".
                               $thread->{Max_Stage}." ".$thread->{State};
        }
    }

## Sort by idle time (closest thing to CPU usage I can think of).

my @sorted;

if (not $config{sort})
    {
        @sorted = sort { $a->{Time} <=> $b->{Time} } @data
    }
    else
    {
        @sorted = sort { $b->{Time} <=> $a->{Time} } @data
    }

foreach my $thread (@sorted)
    {
        ## Check to see if we can skip out.
        ## We skip out if we know the given line doesn't match.

next if (($thread->{Command} eq "Sleep")
                 and
                 (not $config{idle}));

next if (($thread->{Command} eq "Binlog Dump")
                 and
                 (not $config{idle}));

next if (($thread->{Command} eq "Daemon")
                 and
                 (not $config{idle}));

next if ($thread->{User}  !~ $config{filter_user});
        next if ($thread->{db}    !~ $config{filter_db});
        next if ($thread->{Host}  !~ $config{filter_host});
        next if ($thread->{State} !~ $config{filter_state});

## Otherwise, print.

my $smInfo;

if ($thread->{Info})
        {
            if ($config{fullqueries})
            {
                $smInfo = $thread->{Info};
                if (length($smInfo) > $free)
                {
                    $lines_left -= int((length($smInfo) - $free)/$width) + 1;
                }
            }
            else
            {
                $smInfo = substr $thread->{Info}, 0, $free;
            }
        }
#        if ($thread->{State})
#        {
#            $smInfo = substr $thread->{State}, 0, $free;
#        }
        else
        {
            $smInfo = "";
        }

$lines_left--;
        if ($lines_left < 0)
        {
            print WHITE(), "-- Truncated query list --  ";
            last;
        }

if ($HAS_COLOR)
        {
            print YELLOW() if $thread->{Command} eq 'Query';
            print WHITE()  if $thread->{Command} eq 'Sleep';
            print GREEN()  if $thread->{Command} eq 'Connect';
            print BOLD()   if $thread->{Time} > $config{slow};
            print MAGENTA() if $thread->{Time} > $config{long};
        }

if ($has_progress == 1 && !$config{hide_progress})
        {
            printf $format2,
                $thread->{Id}, $thread->{User}, $thread->{Host}, $thread->{db},
                $thread->{Time}, $thread->{Progress}, $thread->{Command},
                $thread->{State}, $smInfo;
        }
        else
        {
            printf $format2,
                $thread->{Id}, $thread->{User}, $thread->{Host}, $thread->{db},
                $thread->{Time}, $thread->{Command}, $thread->{State}, $smInfo;
        }

print RESET() if $HAS_COLOR;
    }

}

###########################################################################

my $questions;

sub GetQPS()
{
    my ($data) = Hashes('SHOW /*mytop*/ STATUS LIKE "Questions"');
    my $num   = $data->{Value};

if (not defined $questions) ## first time?
    {
        $questions = $num;
        return;
    }

my $qps = $num - $questions;
    $questions = $num;
    print "$qps\n";
}

###########################################################################

sub GetInnoDBStatus()
{
    if (not $config{pager})
    {
        if (not $config{pager} = my_which('less'))
        {
            $config{pager} = my_which('more');
        }
    }

my @data = Hashes("SHOW /*mytop*/ ENGINE INNODB STATUS");

open P, "|$config{pager}" or die "$!";
    print keys %{$data[0]};
    print $data[0]->{Status},"\n";
    close P;
}

###########################################################################

my %prev_data;

sub GetCmdSummary()
{
    my ($width, $height, $wpx, $hpx, $lines_left);

if (not $config{batchmode})
    {
        ($width, $height, $wpx, $hpx) = GetTerminalSize();

$lines_left = $height - 2;
    }
    else
    {
        $height = 999_999;     ## I hope you don't have more than that!
        $lines_left = 999_999;
        $width = 80;
    }

## Variable_name and Value pairs come back...
    my @data = Hashes("SHOW /*mytop*/ STATUS LIKE 'Com\\_%'");
    my %cmd_data;
    my %cmd_delta;
    my %cmd_pct;
    my %cmd_delta_pct;
    my $total;
    my $delta_total;

for my $item (@data)
    {
        next unless $item->{Value};
        $item->{Variable_name} =~ s/^Com_//;
        $item->{Variable_name} =~ s/_/ /g;
        $cmd_data{$item->{Variable_name}} = $item->{Value};
        $total += $item->{Value};
    }

## Populate other stats

for my $item (keys %cmd_data)
    {
        $cmd_delta{$item} = $cmd_data{$item} -
            ($prev_data{$item} || $cmd_data{$item} - 1);

$delta_total += $cmd_delta{$item};

$cmd_pct{$item}  = int(($cmd_data{$item} / $total) * 100);
    }

for my $item (keys %cmd_data)
    {
        $cmd_delta_pct{$item}  = int(($cmd_delta{$item} / $delta_total) * 100);
    }

## Display

Clear() unless $config{batchmode};
    print RESET();
    printf "%18s %10s %4s  | %5s %4s\n", 'Command', 'Total', 'Pct', 'Last', 'Pct';
    printf "%18s %10s %4s  | %5s %4s\n", '-------', '-----', '---', '----', '---';
    $lines_left -= 2;

for my $item (sort { $cmd_data{$b} <=> $cmd_data{$a} } keys %cmd_data)
    {
        printf "%18s %10d %4s  | %5d %4s\n",
            $item,
            $cmd_data{$item},
            $cmd_pct{$item} . "%",
            $cmd_delta{$item},
            $cmd_delta_pct{$item} . "%";

last if not $lines_left;
        $lines_left -= 1;
    }

%prev_data = %cmd_data;
}

###########################################################################

sub GetShowVariables()
{
    if (not $config{pager})
    {
        if (not $config{pager} = my_which('less'))
        {
            $config{pager} = my_which('more');
        }
    }

my @rows = Hashes("SHOW /*mytop*/ VARIABLES");

open P, "|$config{pager}" or die "$!";

for my $row (@rows)
    {
        my $name  = $row->{Variable_name};
        my $value = $row->{Value};
        printf P "%32s: %s\n", $name, $value;
    }

close P;
}

###########################################################################

sub GetShowStatus()
{
    Clear() unless $config{batchmode};
    my @rows = Hashes("SHOW /*mytop*/ STATUS");

printf "%32s  %10s %10s   Toggle idle with 'i'\n", 'Counter', 'Total', 'Change';
    printf "%32s  %10s %10s\n", '-------', '-----', '------';

for my $row (@rows)
    {
        my $name  = $row->{Variable_name};
        my $value = $row->{Value};
        my $old   = $statcache{$name};
        my $delta = 0;

next if $name  =~ m/^Com_/;      ## skip Com_ stats
        next if $value =~ m/^[^0-9]*$/;  ## skip non-numeric

## TODO: if Qcache is off, we should skip Qcache_ values

if ($HAS_COLOR and defined $old and $old =~ /^\d/)
        {
            if ($value > $old)
            {
                print YELLOW();
                $delta = $value - $old;
            }
            elsif ($value < $old)
            {
                print RED();
                $delta = $value - $old;
            }

if (not $config{idle} and $value == $old)
            {
                ## filter unchanging stats, maybe
                print RESET();
                next;
            }
        }

printf "%32s: %10s %10s\n", $name, $value, $delta;
        print RESET() if $HAS_COLOR;

$statcache{$name} = $value;
    }

}

###########################################################################

sub FullQueryInfo($)
{
    my $id = shift;

if (not exists $qcache{$id} or not defined $qcache{$id})
    {
        print "*** Invalid id. ***\n";
        return;
    }

my $sql = $qcache{$id};
    print $CLEAR;
    print "Thread $id was executing following query:\n\n";
    print YELLOW(), $sql,"\n\n", RESET();
}

###########################################################################

sub Explain($)
{
    my $id  = shift;

if (not exists $qcache{$id} or not defined $qcache{$id})
    {
        print "*** Invalid id. ***\n";
        return;
    }

my $sql = $qcache{$id};
    my $db  = $dbcache{$id};

Execute("USE /*mytop*/ $db");
    my @info = Hashes("EXPLAIN $sql");
    print $CLEAR;
    print "EXPLAIN $sql:\n\n";
    PrintTable(@info);
}

###########################################################################

sub PrintTable(@)
{
    my $cnt = 1;
    my @cols = qw(table type possible_keys key key_len ref rows Extra);

for my $row (@_)
    {
        print "*** row $cnt ***\n";
        for my $key (@cols)
        {
            my $val = $row->{$key} || 'NULL';
            printf "%15s:  %s\n", $key, $val;
        }
        $cnt++;
    }
}

###########################################################################

sub StringOrRegex($)
{
    my $input = shift;
    chomp $input;
    if (defined $input)
    {
        ## regex, strip /.../ and use via qr//
        if ($input =~ m{^/} and $input =~ m{/$})
        {
            $input =~ s{^/}{} if $config{filter_user};
            $input =~ s{/$}{} if $config{filter_user};
            $input =  qr/$input/;
        }

## reset to match anything
        elsif ($input eq '')
        {
            $input = qr/.*/;
        }

## string, build a simple regex
        else
        {
            $input =  '^' . $input . '$';
            $input = qr/$input/;
        }
    }

## reset to match anything
    else
    {
        $input = qr/.*/;
    }
    return $input;
}

###########################################################################

sub cmd_l
{
    ReadMode($RM_RESET);

print RED(), "Seconds for long queries: ", RESET();
    my $secs = ReadLine(0);

if ($secs =~ /^\s*(\d+)/)
    {
        $config{long} = $1;
        if ($config{long} < 1)
        {
            $config{long} = 1;
        }
    }
    ReadMode($RM_NOBLKRD);
}

sub cmd_s
{
    ReadMode($RM_RESET);

print RED(), "Seconds of Delay: ", RESET();
    my $secs = ReadLine(0);

if ($secs =~ /^\s*(\d+)/)
    {
        $config{delay} = $1;
        if ($config{delay} < 1)
        {
            $config{delay} = 1;
        }
    }
    ReadMode($RM_NOBLKRD);
}

sub cmd_S
{
    ReadMode($RM_RESET);

print RED(), "Seconds for Slow queries: ", RESET();
    my $secs = ReadLine(0);

if ($secs =~ /^\s*(\d+)/)
    {
        $config{slow} = $1;
        if ($config{slow} < 1)
        {
            $config{slow} = 1;
        }
    }
    ReadMode($RM_NOBLKRD);
}

sub cmd_q
{
    ReadMode($RM_RESET);
    print "\n";
    exit;
}

sub trim($)
{
    my $string = shift;
    $string =~ s/^\s+//;
    $string =~ s/\s+$//;
    return $string;
}

###########################################################################

sub PrintHelp()
{
    my $help = qq[Help for mytop version $main::VERSION by Jeremy D. Zawodny <${YELLOW}Jeremy\@Zawodny.com${RESET}>
 with updates by Mark Grennan <${YELLOW}mark\@grennan.com${RESET}> and Jean Weisbuch <${YELLOW}jean\@phpnet.org${RESET}>

? - display this screen
  # - debug mode (toggle)
  c - command summary view (based on Com_* counters)
  C - turn color on and off
  d - show only a specific database
  e - explain the query that a thread is running
  E - display current replication error
  f - show full query info for a given thread
  F - unfilter the display
  h - show only a specifc host's connections
  H - toggle the mytop header
  i - toggle the display of idle (sleeping) threads
  I - show innodb status
  k - kill a thread
  p - pause the display
  l - change long running queries hightlighing
  m - switch [mode] to qps (queries/sec) scrolling view
  M - switch [mode] to status
  o - reverse the sort order (toggle)
  q - quit
  r - reset the status counters (via FLUSH STATUS on your server)
  R - change reverse IP lookup
  s - change the delay between screen updates
  S - change slow query hightlighting
  t - switch to thread view (default)
  u - show only a specific user
  V - show variables
  : - enter a command (not yet implemented)
  ! - Skip an error that has stopped replications (at your own risk)
  L - show full queries (do not strip to terminal width)
  w - adjust the User and DB columns width
  a - toggle the progress column

Base version from ${GREEN}http://www.mysqlfanboy.com/mytop-3${RESET}
This version comes as part of the ${GREEN}MariaDB${RESET} distribution.
];

print $help;
}

sub Sum(@)
{
    my $sum;
    while (my $val = shift @_) { $sum += $val; }
    return $sum;
}

## A useful routine from perlfaq

sub commify($)
{
    local $_  = shift;
    return 0 unless defined $_;
    1 while s/^([-+]?\d+)(\d{3})/$1,$2/;
    return $_;
}

## Compact numeric representation (10,000 -> 10.0k)

sub make_short($)
{
    my $number = shift;
    return commify($number) if $config{long_nums};
    my $n = 0;
    while ($number > 1_025) { $number /= 1024; $n++; };
    return sprintf "%.1f%s", $number, ('','k','M','G', 'T')[$n];
}

## Run a query and return the records has an array of hashes.

sub Hashes($)
{
    my $sql = shift;
    my @records;

if (my $sth = Execute($sql))
    {
        while (my $ref = $sth->fetchrow_hashref)
        {
            print "record\n" if $debug;
            push @records, $ref;
        }
    }
    return @records;
}

## Execute an SQL query and return the statement handle.

sub Execute($)
{
    my $sql = shift;

$sql =~ s/\n/ /sg;

my $sth = $dbh->prepare($sql);

if (not $sth) { ReadMode($RM_RESET); die $DBI::errstr; }

my $ReturnCode = $sth->execute;

if (not $ReturnCode)
    {
        if ($debug)
        {
            print "query failed\n";
            sleep 10;
        }
        return undef;
    }

return $sth;
}

####
#### my_which is used, because we can't assume that every system has the
#### which command. my_which can take only one argument at a time.
#### Return values: requested system command with the first found path,
#### or undefined, if not found.
####

sub my_which
{
  my ($command) = @_;
  my (@paths, $path);

return $command if (-f $command && -x $command);

## Check first if this is a source distribution, then if this binary distribution and last in the path

push @paths, "./extra";
  push @paths, $path_for_script;
  push @paths, split(':', $ENV{'PATH'});

foreach $path (@paths)
  {
    $path .= "/$command";
    return $path if (-f $path && -x $path);
  }
  return undef();
}

=pod

=head1 SYNOPSIS

B<mytop> [options]

=head1 AVAILABILITY

Base version from B<http://www.mysqlfanboy.com/mytop-3>.

This version comes as part of the B<MariaDB> distribution. See B<https://mariadb.org/>.

And older (the original) version B<mytop> is available from
http://www.mysqlfanboy.com/mytop-3/ it B<might> also be on CPAN as
well.

=head1 REQUIREMENTS

In order for B<mytop> to function properly, you must have the
following:

* Perl 5.005 or newer
  * Getopt::Long
  * DBI and DBD::MariaDB or DBD::mysql
  * Term::ReadKey from CPAN

Most systems are likely to have all of those installed--except for
Term::ReadKey. You will need to pick that up from the CPAN. You can
pick up Term::ReadKey here:

http://search.cpan.org/search?dist=TermReadKey

And you obviously need access to a MariaDB server with the necessary
security to run the I<SHOW PROCESSLIST> and I<SHOW STATUS> commands.

If you are a Windows user, using ActiveState's Perl, you can use PPM
(the Perl Package Manager) to install the MariaDB/MySQL and Term::ReadKey
modules.

=head2 Optional Color Support

In additon, if you want a color B<mytop> (recommended), install
Term::ANSIColor from the CPAN:

http://search.cpan.org/search?dist=ANSIColor

Once you do, B<mytop> will automatically use it. However, color is not
yet working on Windows. Patches welcome. :-)

=head2 Optional Hi-Res Timing

If you want B<mytop> to provide more accurate real-time
queries-per-second statistics, install the Time::HiRes module from
CPAN.  B<mytop> will automatically notice that you have it and use it
rather than the standard timing mechanism.

=head2 Platforms

B<mytop> is known to work on:

* Linux (2.2.x, 2.4.x)
  * FreeBSD (2.2, 3.x, 4.x)
  * Mac OS X
  * BSDI 4.x
  * Solaris 2.x
  * Windows NT 4.x (ActivePerl)

If you find that it works on another platform, please let me
know. Given that it is all Perl code, I expect it to be rather
portable to Unix and Unix-like systems. Heck, it I<might> even work on
Win32 systems.

=head1 DESCRIPTION

Help is always welcome in improving this software. Feel free to
contact the author (see L<"AUTHOR"> below) with bug reports, fixes,
suggestions, and comments. Additionally L<"BUGS"> will provide a list
of things this software is not able to do yet.

Having said that, here are the details on how it works and what you can
do with it.

=head2 The Basics

B<mytop> was inspired by the system monitoring tool B<top>. I
routinely use B<top> on Linux, FreeBSD, and Solaris. You are likely to
notice features from each of them here.

B<mytop> will connect to a MariaDB server and periodically run the
I<SHOW PROCESSLIST> and I<SHOW STATUS> commands and attempt to
summarize the information from them in a useful format.

=head2 The Display

The B<mytop> display screen is really broken into two parts. The top 4
lines (header) contain summary information about your MariaDB
server. For example, you might see something like:

MariaDB 10.5.0 on localhost     load (3.89 3.86 3.91) up 7+23:56:31 [16:33:01]
 Queries: 353.4M   qps:  531 Slow:    4.5k         Se/In/Up/De(%):    87/02/02/00
 Sorts:   2390 qps now:  651 Slow qps: 0.0  Threads:   11 (   1/  13) 88/01/03/00
 Handler: (R/W/U/D) 82138/ 5884/   20/    1        Tmp: R/W/U: 13623/29501/   79
 MyISAM Key Cache Efficiency: 99.9%  Bps in/out: 157.4k/ 2.2M   Now in/out: 554.8k/ 2.6M

The first line identifies the hostname of the server (localhost) and
the version of MariaDB it is running. The right hand side shows the
uptime of the MariaDB server process in days+hours:minutes:seconds
format (much like FreeBSD's top) as well as the current time.

The second line displays the total number of queries the server has
processed, the average number of queries per second, the number of
slow queries, and the percentage of Select, Insert, Update, and Delete
queries.

The third real-time values. First is the number of queries per second,
then the number of slow queries, followed by query precentages (like
on the previous line).

And the fourth line displays key buffer efficiency (how often keys are
read from the buffer rather than disk) and the number of bytes that
MariaDB has sent and received, both over all and in the last cycle.

You can toggle the header by hitting B<H> when running B<mytop>.

The second part of the display lists as many threads as can fit on
screen. By default they are sorted according to their idle time (least
idle first). The display looks like:

Id     User       Host      Dbase   Time      Cmd Query or State
    --     ----       ----      -----   ----      --- --------------
    61  jzawodn  localhost      music      0    Query show processlist

As you can see, the thread id, username, host from which the user is
connecting, database to which the user is connected, number of seconds
of idle time, the command the thread is executing, and the query info
are all displayed.

Often times the query info is what you are really interested in, so it
is good to run B<mytop> in an xterm that is wider than the normal 80
columns if possible.

The thread display color-codes the threads if you have installed color
support. The current color scheme only works well in a window with a
dark (like black) background. The colors are selected according to the
C<Command> column of the display:

Query   -  Yellow
    Sleep   -  White
    Connect -  Green
    Slow    -  Bright
    Long    -  Magenta

Those are purely arbitrary and will be customizable in a future
release. If they annoy you just start B<mytop> with the B<--nocolor>
flag or adjust your config file appropriately.

=head2 Arguments

B<mytop> handles long and short command-line arguments. Not all
options have both long and short formats, however. The long arguments
have two dashes `--'. Short arguments only have one '-'.

=over

=item B<-u> or B<--user> username

Username to use when logging in to the MariaDB server. Default: ``B<root>''.

=item B<-p> or B<--pass> or B<--password> I<password>

Password to use when logging in to the MariaDB server. Default: none.

WARNING: This is insecure as the password is visible for anyone.
See B<--prompt> instead!

=item B<-h> or B<--host> I<hostname>[B<:>I<port>]

Hostname of the MariaDB server. The hostname may be followed by an
option port number. Note that the port is specified separate from the
host when using a config file. Default: ``B<localhost>''.

=item B<--port> or B<-P> I<port>

If you're running MariaDB on a non-standard port, use this to specify
the port number. Default: B<3306>.

=item B<-s> or B<--delay> I<seconds>

How long between display refreshes. Default: B<5>

=item B<-d> or B<--db> or B<--database> I<database>

Use if you'd like B<mytop> to connect to a specific database by
default. Default: none.

=item B<-b> or B<--batch> or B<--batchmode>

In batch mode, mytop runs only once, does not clear the screen, and
places no limit on the number of lines it will print. This is suitable
for running periodically (perhaps from B<cron>) to capture the
information into a file for later viewing. You might use batch mode in
a CGI script to occasionally display your MariaDB server status on the
web.

Default: unset.

=item B<-S> or B<--socket> I</path/to/socket>

If you're running B<mytop> on the same host as MariaDB/MySQL, you may wish to
have it use the MariaDB/MySQL socket directly rather than a standard TCP/IP
connection. If you do,just specify one.

Note that specifying a socket will make B<mytop> ignore any host
and/or port that you might have specified. If the socket does not
exist (or the file specified is not a socket), this option will be
ignored and B<mytop> will use the hostname and port number instead.

Default: none.

=item B<--header> or B<--noheader>

Specify if you want the header to display or not. You can toggle this
with the B<h> key while B<mytop> is running.

Default: header.

=item B<--color> or B<--nocolor>

Specify if you want a color display. This has no effect if you don't
have color support available.

Default: If you have color support, B<mytop> will try color unless you
tell it not to.

=item B<-i> or B<--idle> or B<--noi> or B<--noidle>

Specify if you want idle (sleeping) threads to appear in the list. If
sleeping threads are omitted, the default sorting order is reversed so
that the longest running queries appear at the top of the list.

Default: idle.

=item B<--prompt> or B<--noprompt>

Specify if you want to be prompted to type in your database password.
This provides a little bit more security since it not only prevents
the password from viewable in a process list, but also doesn't require
the password to be stored in plain text in your C<~/.mytop> config file.
You will B<only> be prompted if a password has not been specified in
your config file or through another command line option.

Default: noprompt.

=item B<--resolve>

If you have skip-resolve set on MariaDB (to keep it from doing a reverse
DNS lookup on each inbound connection), mytop can replace IP addresses
with hostnames but toggling this option.

Default: noresolve

=item B<--long> or B<--nolong>

For large numbers print all digits (e.g. 10.000) instead of using a more
compact approximation (e.g. 10.0k).

Default: nolong.

=item B<-m> or B<--mode> I<mode>

Specify initial mode B<qps>(queries/second), B<top>(overview),
B<cmd>(command summary), B<innodb>(InnoDB status) or B<status>().

Default: B<top>

=item B<--sort> or B<--nosort>

Reverse sort order from ascending to descending using Idle time.

Default: nosort.

=back

Command-line arguments will always take precedence over config file
options. That happens because the config file is read I<BEFORE> the
command-line arguments are applied.

=head2 Config File

Instead of always using bulky command-line parameters, you can also
use a config files for the default value of your options.

mytop will first read the [client] and [mytop] sections from your
my.cnf files. After that it will read the (C<~/.mytop>) file from your
home directory (if present). These are read I<before> any of your
command-line arguments are processed, so your command-line arguments
will override directives in the config file.

Here is a sample config file C<~/.mytop> which implements the defaults
described above.

user=root
  pass=
  host=localhost
  db=test
  delay=5
  port=3306
  slow=10
  socket=
  batchmode=0
  header=1
  color=1
  idle=1
  long=120

Using a config file will help to ensure that your database password
isn't visible to users on the command-line. Just make sure that the
permissions on C<~/.mytop> are such that others cannot read it (unless
you want them to, of course).

You may have white space on either side of the C<=> in lines of the
config file.

=head2 Shortcut Keys

The following keys perform various actions while B<mytop> is
running. Those which have not been implemented are listed as
such. They are included to give the user idea of what is coming.

=over

=item B<?>

Display help.

=item B<c>

Show "command counters" based on the Com_* values in SHOW STATUS.
This is a new feature.  Feedback welcome.

=item B<C>

Turn display color on and off. Default is on.

=item B<d>

Show only threads connected to a particular database.

=item B<f>

Given a thread id, display the entire query that thread was (and still
may be) running.

=item B<F>

Disable all filtering (host, user, and db).

=item B<h>

Only show queries from a particular host.

=item B<H>

Toggle the header display. You can also specify either C<header=0> or
C<header=1> in your config file to set the default behavior.

=item B<i>

Toggle the display of idle (sleeping) threads. If sleeping threads are
filtered, the default sorting order is reversed so that the longest
running queries appear at the top of the list.

=item B<I>

Switch to InnoDB Status mode.  The output of "SHOW ENGINE INNODB STATUS" will
be displayed every cycle.  In a future version, this may actually
summarize that data rather than producing raw output.

=item B<k>

Kill a thread.

=item B<m>

Toggle modes. Currently this switches from `top' mode to `qps'
(Queries Per Second Mode). In this mode, mytop will write out one
integer per second. The number written reflects the number of queries
executed by the server in the previous one second interval.

More modes may be added in the future.

=item B<o>

Reverse the default sort order.

=item B<p>

Pause display.

=item B<q>

Quit B<mytop>

=item B<r>

Reset the server's status counters via a I<FLUSH STATUS> command.

=item B<R>

Togle IP reverse lookup. Default is on.

=item B<s>

Change the sleep time (number of seconds between display refreshes).

=item B<S>

Set the number of seconds a query will need to run before it is
considered old and will be highlighted.

=item B<u>

Show only threads owned by a giver user.

=back

The B<s> key has a command-line counterpart: B<-s>.

The B<h> key has two command-line counterparts: B<--header> and
B<--noheader>.

=head1 BUGS

This is more of a BUGS + WishList.

Some performance information is not available when talking to a
version 3.22.x MySQL server. Additional information (about threads
mostly) was added to the output of I<SHOW STATUS> in MySQL 3.23.x and
B<mytop> makes use of it. If the information is not available, you
will simply see zeros where the real numbers should be.

Simply running this program will increase your overall counters (such
as the number of queries run). But you may or may not view that as a
bug.

B<mytop> consumes too much CPU time when running (verified on older
versions of Linux and FreeBSD). It's likely a problem related to
Term::ReadKey. I haven't had time to investigate yet, so B<mytop> now
automatically lowers its priority when you run it. You may also think
about running B<mytop> on another workstation instead of your database
server. However, C<mytop> on Solaris does B<not> have this problem.
Newer versions of Linux and FreeBSD seem to have fixed this.

You can't specify the maximum number of threads to list. If you have
many threads and a tall xterm, B<mytop> will always try to display as
many as it can fit.

The size of most of the columns in the display has a small maximum
width. If you have fairly long database/user/host names the display
may appear odd. I have no good idea as to how best to deal with that
yet. Suggestions are welcome.

It'd be nice if you could just add B<mytop> configuration directives
in your C<my.cnf> file instead of having a separate config file.

You should be able to specify the columns you'd like to see in the
display and the order in which they appear. If you only have one
username that connects to your database, it's probably not worth
having the User column appear, for example.

=head1 AUTHOR

mytop was developed and is maintained by Jeremy D. Zawodny
(Jeremy@Zawodny.com).

If you wish to e-mail me regarding this software, B<PLEASE> subscribe
to the B<mytop> mailing list.  See the B<mytop> homepage for details.

=head1 DISCLAIMER

While I use this software in my job at Yahoo!, I am solely responsible
for it. Yahoo! does not necessarily support this software in any
way. It is merely a personal idea which happened to be very useful in
my job.

=head1 SEE ALSO

Please check the MariaDB manual if you're not sure where some of the
output of B<mytop> is coming from.

=head1 COPYRIGHT

=head1 CREDITS

Fix a bug. Add a feature. See your name here!

Many thanks go to these fine folks:

=over

=item Jean Weisbuch (jean@phpnet.org)

Added --fullqueries and --sort options, dynamic user and database columns
width, reading of .my.cnf, state/progress column that can be disabled
dynamically (when available) and various small fixes.

=item Michael "Monty" Widenius <monty@askmonty.org>

Fixed a couple of minor bugs that gave warnings on startup.
Added support for MariaDB (show MariaDB at top and % done).
Cut long server version names to display width.
Made 'State' length dynamic.

=item Mark Grennan (mark@grennan.com) www.linuxfangoy.com

Added updates for MySQL 5.x. Added 'S' (slow) highlighting.
Added 'C' to turn on and off Color. Added 'l' command to change
color for long running queries. Fixed a few documentation issues.
Monitors Slave status. Added color to Queue hit ratio.
Added number of rows sorted per second.
Created release 1.7.

=item Sami Ahlroos (sami@avis-net.de)

Suggested the idle/noidle stuff.

=item Jan Willamowius (jan@janhh.shnet.org)

Minor bug report. Documentation fixes.

=item Alex Osipov (alex@acky.net)

Long command-line options, Unix socket support.

=item Stephane Enten (tuf@grolier.fr)

Suggested batch mode.

=item Richard Ellerbrock (richarde@eskom.co.za)

Bug reports and usability suggestions.

=item William R. Mattil (wrm@newton.irngtx.tel.gte.com)

Bug report about empty passwords not working.

=item Benjamin Pflugmann (philemon@spin.de)

Suggested -P command-line flag as well as other changes.

=item Justin Mecham <justin@aspect.net>

Suggested setting $0 to `mytop'.

=item Thorsten Kunz <thorsten.kunz@de.tiscali.com>

Provided a fix for cases when we try remove the domain name from the
display even if it is actually an IP address.

=item Sasha Pachev <sasha@mysql.com>

Provided the idea of real-time queries per second in the main display.

=item Paul DuBois <paul@snake.net>

Pointed out some option-handling bugs.

=item Mike Wexler <mwexler@tias.com>

Suggested that we don't mangle (normalize) whitespace in query info by
default.

=item Mark Zweifel <markez@yahoo-inc.com>

Make the --idle command-line argument negatable.

=item Axel Schwenke <schwenke@jobpilot.de>

Noticed the incorrect formula for query cache hit percentages in
version 1.2.

=item Steven Roussey <sroussey@network54.com>

Supplied a patch to help filter binary junk in queries so that
terminals don't freak out.

=item Jon R. Luini <falcon@chime.com>

Supplied a patch that formed the basis for C<--prompt> support.
Sean Leach <sleach@wiggum.com> submitted a similar patch.

=item Yogish Baliga <baliga@yahoo-inc.com>

Supplied a patch that formed the basis for C<--resolve> support.

=item Per Andreas Buer <perbu@linpro.no>

Supplied an excellent patch to tidy up the top display.  This includes
showing most values in short form, such as 10k rather than 10000.

=back

See the Changes file on the B<mytop> distribution page for more
details on what has changed.

=head1 LICENSE

B<mytop> is licensed under the GNU General Public License version
2. For the full license information, please visit
http://www.gnu.org/copyleft/gpl.html

=cut

__END__