Gecko [ betsfootball.net ]

Name	Size	Permission	Date
X11	[ DIR ]	drwxr-xr-x	2025-10-09 10:16
[	66.89 KB	-rwxr-xr-x	2022-09-20 15:27
aa-enabled	18.23 KB	-rwxr-xr-x	2023-02-14 11:49
aa-exec	18.23 KB	-rwxr-xr-x	2023-02-14 11:49
aa-features-abi	18.23 KB	-rwxr-xr-x	2023-02-14 11:49
ab	58.42 KB	-rwxr-xr-x	2024-10-04 15:21
aclocal	35.18 KB	-rwxr-xr-x	2022-03-18 13:09
aclocal-1.16	35.18 KB	-rwxr-xr-x	2022-03-18 13:09
add-apt-repository	14.1 KB	-rwxr-xr-x	2024-05-17 12:23
addpart	30.31 KB	-rwxr-xr-x	2024-11-21 20:01
addr2line	23.14 KB	-rwxr-xr-x	2023-01-14 17:24
appstreamcli	128.12 KB	-rwxr-xr-x	2023-05-28 15:10
apropos	51.29 KB	-rwxr-xr-x	2023-03-12 22:23
apt	18.31 KB	-rwxr-xr-x	2023-05-25 14:11
apt-add-repository	14.1 KB	-rwxr-xr-x	2024-05-17 12:23
apt-cache	86.38 KB	-rwxr-xr-x	2023-05-25 14:11
apt-cdrom	22.38 KB	-rwxr-xr-x	2023-05-25 14:11
apt-config	26.31 KB	-rwxr-xr-x	2023-05-25 14:11
apt-extracttemplates	22.39 KB	-rwxr-xr-x	2023-05-25 14:11
apt-ftparchive	270.39 KB	-rwxr-xr-x	2023-05-25 14:11
apt-get	50.38 KB	-rwxr-xr-x	2023-05-25 14:11
apt-key	27.32 KB	-rwxr-xr-x	2023-05-25 14:11
apt-listchanges	11.96 KB	-rwxr-xr-x	2021-03-28 11:06
apt-mark	58.38 KB	-rwxr-xr-x	2023-05-25 14:11
apt-sortpkgs	38.32 KB	-rwxr-xr-x	2023-05-25 14:11
ar	51.17 KB	-rwxr-xr-x	2023-01-14 17:24
arch	42.86 KB	-rwxr-xr-x	2022-09-20 15:27
aria_chk	5.49 MB	-rwxr-xr-x	2025-02-19 00:56
aria_dump_log	5.29 MB	-rwxr-xr-x	2025-02-19 00:56
aria_ftdump	5.3 MB	-rwxr-xr-x	2025-02-19 00:56
aria_pack	5.33 MB	-rwxr-xr-x	2025-02-19 00:56
aria_read_log	5.44 MB	-rwxr-xr-x	2025-02-19 00:56
as	897.41 KB	-rwxr-xr-x	2023-01-14 17:24
autoconf	14.85 KB	-rwxr-xr-x	2023-01-14 17:42
autoheader	8.82 KB	-rwxr-xr-x	2023-01-14 17:42
autom4te	32.69 KB	-rwxr-xr-x	2023-01-14 17:42
automake	255.91 KB	-rwxr-xr-x	2022-03-18 13:09
automake-1.16	255.91 KB	-rwxr-xr-x	2022-03-18 13:09
autopoint	26.38 KB	-rwxr-xr-x	2023-02-26 15:20
autoreconf	26.3 KB	-rwxr-xr-x	2023-01-14 17:42
autoscan	16.77 KB	-rwxr-xr-x	2023-01-14 17:42
autoupdate	33.22 KB	-rwxr-xr-x	2023-01-14 17:42
awk	696.44 KB	-rwxr-xr-x	2023-02-19 13:30
b2sum	58.98 KB	-rwxr-xr-x	2022-09-20 15:27
base32	46.89 KB	-rwxr-xr-x	2022-09-20 15:27
base64	46.89 KB	-rwxr-xr-x	2022-09-20 15:27
basename	42.83 KB	-rwxr-xr-x	2022-09-20 15:27
basenc	54.89 KB	-rwxr-xr-x	2022-09-20 15:27
bash	1.21 MB	-rwxr-xr-x	2024-03-29 19:40
bashbug	6.7 KB	-rwxr-xr-x	2024-03-29 19:40
bsondump	11.03 MB	-rwxr-xr-x	2025-04-01 15:22
buildhash	46.63 KB	-rwxr-xr-x	2022-03-29 18:19
bunzip2	38.3 KB	-rwxr-xr-x	2022-09-19 02:54
busctl	90.5 KB	-rwxr-xr-x	2025-03-06 14:56
busybox	754.77 KB	-rwxr-xr-x	2023-04-23 21:24
bzcat	38.3 KB	-rwxr-xr-x	2022-09-19 02:54
bzcmp	2.17 KB	-rwxr-xr-x	2022-09-19 02:54
bzdiff	2.17 KB	-rwxr-xr-x	2022-09-19 02:54
bzegrep	3.69 KB	-rwxr-xr-x	2022-09-19 02:54
bzexe	4.78 KB	-rwxr-xr-x	2021-11-27 12:25
bzfgrep	3.69 KB	-rwxr-xr-x	2022-09-19 02:54
bzgrep	3.69 KB	-rwxr-xr-x	2022-09-19 02:54
bzip2	38.3 KB	-rwxr-xr-x	2022-09-19 02:54
bzip2recover	14.23 KB	-rwxr-xr-x	2022-09-19 02:54
bzless	1.27 KB	-rwxr-xr-x	2022-09-19 02:54
bzmore	1.27 KB	-rwxr-xr-x	2022-09-19 02:54
c++	1.25 MB	-rwxr-xr-x	2023-01-08 09:12
c++filt	18.51 KB	-rwxr-xr-x	2023-01-14 17:24
c89	428 B	-rwxr-xr-x	2020-11-17 18:53
c89-gcc	428 B	-rwxr-xr-x	2020-11-17 18:53
c99	454 B	-rwxr-xr-x	2020-11-17 18:53
c99-gcc	454 B	-rwxr-xr-x	2020-11-17 18:53
c_rehash	6.68 KB	-rwxr-xr-x	2024-10-27 14:16
captoinfo	90.34 KB	-rwxr-xr-x	2023-05-07 14:33
cat	42.98 KB	-rwxr-xr-x	2022-09-20 15:27
catman	42.77 KB	-rwxr-xr-x	2023-03-12 22:23
cc	1.24 MB	-rwxr-xr-x	2023-01-08 09:12
certbot	958 B	-rwxr-xr-x	2023-04-16 05:22
cgi-fcgi	18 KB	-rwxr-xr-x	2021-01-11 05:57
chage	78.49 KB	-rwxr-sr-x	2023-03-23 12:40
chardet	221 B	-rwxr-xr-x	2022-12-26 14:42
chardetect	221 B	-rwxr-xr-x	2022-12-26 14:42
chattr	14.24 KB	-rwxr-xr-x	2023-03-05 03:16
chcon	67.11 KB	-rwxr-xr-x	2022-09-20 15:27
checkgid	14.23 KB	-rwxr-xr-x	2024-10-04 15:21
chfn	61.2 KB	-rwsr-xr-x	2023-03-23 12:40
chgrp	67.05 KB	-rwxr-xr-x	2022-09-20 15:27
chmod	62.98 KB	-rwxr-xr-x	2022-09-20 15:27
choom	54.31 KB	-rwxr-xr-x	2024-11-21 20:01
chown	71.05 KB	-rwxr-xr-x	2022-09-20 15:27
chrt	66.31 KB	-rwxr-xr-x	2024-11-21 20:01
chsh	51.64 KB	-rwsr-xr-x	2023-03-23 12:40
chvt	14.57 KB	-rwxr-xr-x	2023-03-23 09:34
ckbcomp	147.14 KB	-rwxr-xr-x	2023-05-21 21:30
cksum	139.05 KB	-rwxr-xr-x	2022-09-20 15:27
clear	14.24 KB	-rwxr-xr-x	2023-05-07 14:33
clear_console	14.15 KB	-rwxr-xr-x	2024-03-29 19:40
cmp	50.95 KB	-rwxr-xr-x	2023-02-03 19:00
codepage	14.41 KB	-rwxr-xr-x	2023-03-23 09:34
col	34.31 KB	-rwxr-xr-x	2024-11-21 20:01
colcrt	14.31 KB	-rwxr-xr-x	2024-11-21 20:01
colrm	30.31 KB	-rwxr-xr-x	2024-11-21 20:01
column	54.31 KB	-rwxr-xr-x	2024-11-21 20:01
comm	46.92 KB	-rwxr-xr-x	2022-09-20 15:27
compose	18.06 KB	-rwxr-xr-x	2021-11-29 13:07
corelist	15.01 KB	-rwxr-xr-x	2023-11-25 20:59
corepack	132 B	-rwxr-xr-x	2024-02-26 06:00
cp	147.61 KB	-rwxr-xr-x	2022-09-20 15:27
cpan	8.16 KB	-rwxr-xr-x	2023-11-25 20:59
cpan5.36-x86_64-linux-gnu	8.18 KB	-rwxr-xr-x	2023-11-25 20:59
cpio	158.56 KB	-rwxr-xr-x	2022-09-14 19:45
cpio-filter	1.22 KB	-rwxr-xr-x	2022-11-19 21:25
cpp	1.24 MB	-rwxr-xr-x	2023-01-08 09:12
cpp-12	1.24 MB	-rwxr-xr-x	2023-01-08 09:12
crc32	1.04 KB	-rwxr-xr-x	2020-03-14 12:52
crontab	42.63 KB	-rwxr-sr-x	2023-03-02 07:33
csplit	119.17 KB	-rwxr-xr-x	2022-09-20 15:27
ctstat	26.59 KB	-rwxr-xr-x	2023-05-22 13:19
curl	274.22 KB	-rwxr-xr-x	2025-03-09 10:45
cut	46.98 KB	-rwxr-xr-x	2022-09-20 15:27
cvtsudoers	337.19 KB	-rwxr-xr-x	2023-06-27 11:45
dash	122.7 KB	-rwxr-xr-x	2023-01-05 13:20
date	119.05 KB	-rwxr-xr-x	2022-09-20 15:27
dbilogstrip	1.35 KB	-rwxr-xr-x	2022-11-19 21:14
dbiprof	6.06 KB	-rwxr-xr-x	2022-11-19 21:14
dbiproxy	5.27 KB	-rwxr-xr-x	2022-11-19 21:14
dbus-cleanup-sockets	14.22 KB	-rwxr-xr-x	2023-09-16 10:03
dbus-daemon	238.56 KB	-rwxr-xr-x	2023-09-16 10:03
dbus-monitor	26.23 KB	-rwxr-xr-x	2023-09-16 10:03
dbus-run-session	14.23 KB	-rwxr-xr-x	2023-09-16 10:03
dbus-send	30.22 KB	-rwxr-xr-x	2023-09-16 10:03
dbus-update-activation-environment	14.22 KB	-rwxr-xr-x	2023-09-16 10:03
dbus-uuidgen	14.22 KB	-rwxr-xr-x	2023-09-16 10:03
dd	87.15 KB	-rwxr-xr-x	2022-09-20 15:27
deallocvt	14.53 KB	-rwxr-xr-x	2023-03-23 09:34
deb-systemd-helper	23.79 KB	-rwxr-xr-x	2022-07-09 00:05
deb-systemd-invoke	6.09 KB	-rwxr-xr-x	2022-07-02 15:23
debconf	2.79 KB	-rwxr-xr-x	2023-01-08 21:50
debconf-apt-progress	11.27 KB	-rwxr-xr-x	2023-01-08 21:50
debconf-communicate	608 B	-rwxr-xr-x	2023-01-08 21:50
debconf-copydb	1.68 KB	-rwxr-xr-x	2023-01-08 21:50
debconf-escape	647 B	-rwxr-xr-x	2023-01-08 21:50
debconf-gettextize	15.97 KB	-rwxr-xr-x	2020-12-30 01:09
debconf-set-selections	2.92 KB	-rwxr-xr-x	2023-01-08 21:50
debconf-show	1.78 KB	-rwxr-xr-x	2023-01-08 21:50
debconf-updatepo	4.46 KB	-rwxr-xr-x	2020-12-30 01:09
debianbts	217 B	-rwxr-xr-x	2022-12-08 11:34
defmt-c	14.23 KB	-rwxr-xr-x	2022-03-29 18:19
defmt-sh	14.23 KB	-rwxr-xr-x	2022-03-29 18:19
delpart	30.31 KB	-rwxr-xr-x	2024-11-21 20:01
delv	41.3 KB	-rwxr-xr-x	2025-01-25 10:14
df	99.8 KB	-rwxr-xr-x	2022-09-20 15:27
dh	28.85 KB	-rwxr-xr-x	2023-01-02 14:54
dh_assistant	20.34 KB	-rwxr-xr-x	2023-01-02 14:54
dh_auto_build	1.37 KB	-rwxr-xr-x	2023-01-02 14:54
dh_auto_clean	1.51 KB	-rwxr-xr-x	2023-01-02 14:54
dh_auto_configure	1.63 KB	-rwxr-xr-x	2023-01-02 14:54
dh_auto_install	3.22 KB	-rwxr-xr-x	2023-01-02 14:54
dh_auto_test	1.65 KB	-rwxr-xr-x	2023-01-02 14:54
dh_autoreconf	6.46 KB	-rwxr-xr-x	2021-02-04 11:26
dh_autoreconf_clean	2.1 KB	-rwxr-xr-x	2021-02-04 11:26
dh_autotools-dev_restoreconfig	1.79 KB	-rwxr-xr-x	2022-01-31 14:43
dh_autotools-dev_updateconfig	1.81 KB	-rwxr-xr-x	2022-01-31 14:43
dh_bash-completion	4.31 KB	-rwxr-xr-x	2021-08-28 15:26
dh_bugfiles	3.58 KB	-rwxr-xr-x	2023-01-02 14:54
dh_builddeb	4.79 KB	-rwxr-xr-x	2023-01-02 14:54
dh_clean	5.03 KB	-rwxr-xr-x	2023-01-02 14:54
dh_compress	7.67 KB	-rwxr-xr-x	2023-01-02 14:54
dh_dwz	4.99 KB	-rwxr-xr-x	2023-01-02 14:54
dh_fixperms	5.29 KB	-rwxr-xr-x	2023-01-02 14:54
dh_gencontrol	5.88 KB	-rwxr-xr-x	2023-01-02 14:54
dh_icons	2.04 KB	-rwxr-xr-x	2023-01-02 14:54
dh_install	12.16 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installalternatives	6.61 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installcatalogs	3.33 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installchangelogs	11.57 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installcron	1.65 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installdeb	12.71 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installdebconf	6.69 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installdirs	3.09 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installdocs	14.65 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installemacsen	3.74 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installexamples	5.65 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installgsettings	2.24 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installifupdown	1.47 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installinfo	3.38 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installinit	13.96 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installinitramfs	2.5 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installlogcheck	1.94 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installlogrotate	1.14 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installman	13.37 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installmanpages	4.89 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installmenu	2.15 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installmime	1.3 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installmodules	2.66 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installpam	1.42 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installppp	1.38 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installsystemd	14.06 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installsystemduser	8.36 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installsysusers	2.98 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installtmpfiles	3.24 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installudev	2.1 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installwm	3.3 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installxfonts	2.8 KB	-rwxr-xr-x	2023-01-02 14:54
dh_installxmlcatalogs	9.22 KB	-rwxr-xr-x	2019-02-27 00:18
dh_link	4.32 KB	-rwxr-xr-x	2023-01-02 14:54
dh_lintian	1.29 KB	-rwxr-xr-x	2023-01-02 14:54
dh_listpackages	825 B	-rwxr-xr-x	2023-01-02 14:54
dh_makeshlibs	15.12 KB	-rwxr-xr-x	2023-01-02 14:54
dh_md5sums	3.46 KB	-rwxr-xr-x	2023-01-02 14:54
dh_missing	8.75 KB	-rwxr-xr-x	2023-01-02 14:54
dh_movefiles	4.69 KB	-rwxr-xr-x	2023-01-02 14:54
dh_perl	5.03 KB	-rwxr-xr-x	2023-01-02 14:54
dh_perl_dbi	1.17 KB	-rwxr-xr-x	2022-11-19 21:14
dh_phpcomposer	3.01 KB	-rwxr-xr-x	2023-01-28 15:13
dh_phppear	5.63 KB	-rwxr-xr-x	2023-01-28 15:13
dh_prep	1.87 KB	-rwxr-xr-x	2023-01-02 14:54
dh_shlibdeps	6.24 KB	-rwxr-xr-x	2023-01-02 14:54
dh_strip	14.85 KB	-rwxr-xr-x	2023-01-02 14:54
dh_strip_nondeterminism	3.12 KB	-rwxr-xr-x	2023-01-15 19:53
dh_systemd_enable	8.98 KB	-rwxr-xr-x	2023-01-02 14:54
dh_systemd_start	8.57 KB	-rwxr-xr-x	2023-01-02 14:54
dh_testdir	1.31 KB	-rwxr-xr-x	2023-01-02 14:54
dh_testroot	2.91 KB	-rwxr-xr-x	2023-01-02 14:54
dh_ucf	2.38 KB	-rwxr-xr-x	2023-01-02 14:54
dh_update_autotools_config	1.84 KB	-rwxr-xr-x	2023-01-02 14:54
dh_usrlocal	4.2 KB	-rwxr-xr-x	2023-01-02 14:54
diff	151.58 KB	-rwxr-xr-x	2023-02-03 19:00
diff3	67.14 KB	-rwxr-xr-x	2023-02-03 19:00
dig	138.77 KB	-rwxr-xr-x	2025-01-25 10:14
dir	147.8 KB	-rwxr-xr-x	2022-09-20 15:27
dircolors	50.92 KB	-rwxr-xr-x	2022-09-20 15:27
dirmngr	586.13 KB	-rwxr-xr-x	2023-03-26 13:03
dirmngr-client	106.87 KB	-rwxr-xr-x	2023-03-26 13:03
dirname	38.83 KB	-rwxr-xr-x	2022-09-20 15:27
discover-config	2.87 KB	-rwxr-xr-x	2022-01-09 07:48
dmesg	86.58 KB	-rwxr-xr-x	2024-11-21 20:01
dnsdomainname	22.15 KB	-rwxr-xr-x	2022-12-19 13:33
dnstap-read	18.33 KB	-rwxr-xr-x	2025-01-25 10:14
domainname	22.15 KB	-rwxr-xr-x	2022-12-19 13:33
dotlockfile	22.5 KB	-rwxr-sr-x	2021-02-04 15:18
dpkg	310.64 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-architecture	14.85 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-buildflags	8.14 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-buildpackage	32.63 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-checkbuilddeps	7.45 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-deb	166.52 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-distaddfile	2.72 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-divert	154.55 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-genbuildinfo	18.48 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-genchanges	17.39 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-gencontrol	14.2 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-gensymbols	10.65 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-maintscript-helper	20.71 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-mergechangelogs	8.88 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-name	6.62 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-parsechangelog	4.83 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-query	158.58 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-realpath	4.09 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-scanpackages	8.47 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-scansources	8.98 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-shlibdeps	31.17 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-source	22.91 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-split	126.48 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-statoverride	62.33 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-trigger	86.48 KB	-rwxr-xr-x	2023-05-11 02:04
dpkg-vendor	3.18 KB	-rwxr-xr-x	2023-05-11 02:04
du	171.33 KB	-rwxr-xr-x	2022-09-20 15:27
dumpkeys	175.13 KB	-rwxr-xr-x	2023-03-23 09:34
dwp	1.79 MB	-rwxr-xr-x	2023-01-14 17:24
dwz	237.66 KB	-rwxr-xr-x	2022-12-26 10:45
echo	42.83 KB	-rwxr-xr-x	2022-09-20 15:27
edit	18.06 KB	-rwxr-xr-x	2021-11-29 13:07
editor	280.74 KB	-rwxr-xr-x	2024-05-06 06:10
egrep	41 B	-rwxr-xr-x	2023-01-24 14:43
eject	82.16 KB	-rwxr-xr-x	2024-11-21 20:01
elfedit	35.03 KB	-rwxr-xr-x	2023-01-14 17:24
enc2xs	40.96 KB	-rwxr-xr-x	2023-11-25 20:59
encguess	3 KB	-rwxr-xr-x	2023-11-25 20:59
env	47.4 KB	-rwxr-xr-x	2022-09-20 15:27
envsubst	34.31 KB	-rwxr-xr-x	2023-02-26 15:20
eqn	205.42 KB	-rwxr-xr-x	2023-03-07 09:38
ex	1.55 MB	-rwxr-xr-x	2025-02-16 05:23
expand	42.92 KB	-rwxr-xr-x	2022-09-20 15:27
expiry	30.45 KB	-rwxr-sr-x	2023-03-23 12:40
expr	115.05 KB	-rwxr-xr-x	2022-09-20 15:27
factor	83.2 KB	-rwxr-xr-x	2022-09-20 15:27
faillog	22.53 KB	-rwxr-xr-x	2023-03-23 12:40
faked-sysv	34.76 KB	-rwxr-xr-x	2023-03-18 09:22
faked-tcp	34.78 KB	-rwxr-xr-x	2023-03-18 09:22
fakeroot	3.9 KB	-rwxr-xr-x	2023-03-18 09:22
fakeroot-sysv	3.9 KB	-rwxr-xr-x	2023-03-18 09:22
fakeroot-tcp	3.9 KB	-rwxr-xr-x	2023-03-18 09:22
fallocate	34.31 KB	-rwxr-xr-x	2024-11-21 20:01
false	34.83 KB	-rwxr-xr-x	2022-09-20 15:27
fc-cache	18.59 KB	-rwxr-xr-x	2023-01-31 22:24
fc-cat	18.52 KB	-rwxr-xr-x	2023-01-31 22:24
fc-conflist	14.34 KB	-rwxr-xr-x	2023-01-31 22:24
fc-list	14.4 KB	-rwxr-xr-x	2023-01-31 22:24
fc-match	14.47 KB	-rwxr-xr-x	2023-01-31 22:24
fc-pattern	14.39 KB	-rwxr-xr-x	2023-01-31 22:24
fc-query	14.36 KB	-rwxr-xr-x	2023-01-31 22:24
fc-scan	14.42 KB	-rwxr-xr-x	2023-01-31 22:24
fc-validate	14.41 KB	-rwxr-xr-x	2023-01-31 22:24
fcgistarter	14.23 KB	-rwxr-xr-x	2024-10-04 15:21
fgconsole	14.52 KB	-rwxr-xr-x	2023-03-23 09:34
fgrep	41 B	-rwxr-xr-x	2023-01-24 14:43
filan	96.02 KB	-rwxr-xr-x	2022-11-06 08:15
file	26.48 KB	-rwxr-xr-x	2023-01-28 18:17
fincore	34.36 KB	-rwxr-xr-x	2024-11-21 20:01
find	219.58 KB	-rwxr-xr-x	2023-01-08 18:07
findaffix	11.74 KB	-rwxr-xr-x	2022-03-29 18:19
findmnt	83.59 KB	-rwxr-xr-x	2024-11-21 20:01
flock	34.39 KB	-rwxr-xr-x	2024-11-21 20:01
fmt	46.89 KB	-rwxr-xr-x	2022-09-20 15:27
fold	42.89 KB	-rwxr-xr-x	2022-09-20 15:27
free	26.3 KB	-rwxr-xr-x	2022-12-19 06:06
funzip	22.46 KB	-rwxr-xr-x	2023-02-19 18:02
fuser	39.83 KB	-rwxr-xr-x	2022-12-13 05:27
g++	1.25 MB	-rwxr-xr-x	2023-01-08 09:12
g++-12	1.25 MB	-rwxr-xr-x	2023-01-08 09:12
galera_new_cluster	917 B	-rwxr-xr-x	2025-02-19 00:56
galera_recovery	3.29 KB	-rwxr-xr-x	2025-02-19 00:56
gapplication	22.31 KB	-rwxr-xr-x	2024-11-14 09:42
gawk	696.44 KB	-rwxr-xr-x	2023-02-19 13:30
gawkbug	6.54 KB	-rwxr-xr-x	2023-02-19 13:30
gcc	1.24 MB	-rwxr-xr-x	2023-01-08 09:12
gcc-12	1.24 MB	-rwxr-xr-x	2023-01-08 09:12
gcc-ar	34.54 KB	-rwxr-xr-x	2023-01-08 09:12
gcc-ar-12	34.54 KB	-rwxr-xr-x	2023-01-08 09:12
gcc-nm	34.54 KB	-rwxr-xr-x	2023-01-08 09:12
gcc-nm-12	34.54 KB	-rwxr-xr-x	2023-01-08 09:12
gcc-ranlib	34.54 KB	-rwxr-xr-x	2023-01-08 09:12
gcc-ranlib-12	34.54 KB	-rwxr-xr-x	2023-01-08 09:12
gcov	720.16 KB	-rwxr-xr-x	2023-01-08 09:12
gcov-12	720.16 KB	-rwxr-xr-x	2023-01-08 09:12
gcov-dump	568.02 KB	-rwxr-xr-x	2023-01-08 09:12
gcov-dump-12	568.02 KB	-rwxr-xr-x	2023-01-08 09:12
gcov-tool	588.09 KB	-rwxr-xr-x	2023-01-08 09:12
gcov-tool-12	588.09 KB	-rwxr-xr-x	2023-01-08 09:12
gdbus	50.31 KB	-rwxr-xr-x	2024-11-14 09:42
gencat	26.75 KB	-rwxr-xr-x	2025-03-06 22:46
geqn	205.42 KB	-rwxr-xr-x	2023-03-07 09:38
getconf	26.5 KB	-rwxr-xr-x	2025-03-06 22:46
getent	35.47 KB	-rwxr-xr-x	2025-03-06 22:46
getkeycodes	14.53 KB	-rwxr-xr-x	2023-03-23 09:34
getopt	34.31 KB	-rwxr-xr-x	2024-11-21 20:01
gettext	34.31 KB	-rwxr-xr-x	2023-02-26 15:20
gettext.sh	5.07 KB	-rwxr-xr-x	2023-02-26 15:20
gettextize	41.28 KB	-rwxr-xr-x	2023-02-26 15:20
gio	90.33 KB	-rwxr-xr-x	2024-11-14 09:42
gio-querymodules	14.23 KB	-rwxr-xr-x	2024-11-14 09:42
glib-compile-schemas	62.3 KB	-rwxr-xr-x	2024-11-14 09:42
gmake	234.65 KB	-rwxr-xr-x	2021-04-10 13:55
gold	2.99 MB	-rwxr-xr-x	2023-01-14 17:24
gp-archive	159.06 KB	-rwxr-xr-x	2023-01-14 17:24
gp-collect-app	175.27 KB	-rwxr-xr-x	2023-01-14 17:24
gp-display-html	578.29 KB	-rwxr-xr-x	2023-01-14 17:24
gp-display-src	150.81 KB	-rwxr-xr-x	2023-01-14 17:24
gp-display-text	257.3 KB	-rwxr-xr-x	2023-01-14 17:24
gpasswd	86.42 KB	-rwsr-xr-x	2023-03-23 12:40
gpg	1.06 MB	-rwxr-xr-x	2023-03-26 13:03
gpg-agent	425.22 KB	-rwxr-xr-x	2023-03-26 13:03
gpg-connect-agent	154.96 KB	-rwxr-xr-x	2023-03-26 13:03
gpg-wks-server	203 KB	-rwxr-xr-x	2023-03-26 13:03
gpg-zip	3.43 KB	-rwxr-xr-x	2023-03-26 13:03
gpgcompose	910.27 KB	-rwxr-xr-x	2023-03-26 13:03
gpgconf	174.73 KB	-rwxr-xr-x	2023-03-26 13:03
gpgparsemail	34.3 KB	-rwxr-xr-x	2023-03-26 13:03
gpgsm	527.66 KB	-rwxr-xr-x	2023-03-26 13:03
gpgsplit	74.56 KB	-rwxr-xr-x	2023-03-26 13:03
gpgtar	147.52 KB	-rwxr-xr-x	2023-03-26 13:03
gpgv	463 KB	-rwxr-xr-x	2023-03-26 13:03
gpic	220.27 KB	-rwxr-xr-x	2023-03-07 09:38
gprof	108.35 KB	-rwxr-xr-x	2023-01-14 17:24
gprofng	146.59 KB	-rwxr-xr-x	2023-01-14 17:24
grep	198.39 KB	-rwxr-xr-x	2023-01-24 14:43
gresource	22.23 KB	-rwxr-xr-x	2024-11-14 09:42
groff	125.45 KB	-rwxr-xr-x	2023-03-07 09:38
grog	2.71 KB	-rwxr-xr-x	2023-03-07 09:38
grops	185.86 KB	-rwxr-xr-x	2023-03-07 09:38
grotty	137.48 KB	-rwxr-xr-x	2023-03-07 09:38
groups	42.89 KB	-rwxr-xr-x	2022-09-20 15:27
grub-editenv	374.16 KB	-rwxr-xr-x	2023-10-02 14:11
grub-file	809.41 KB	-rwxr-xr-x	2023-10-02 14:11
grub-fstest	931.13 KB	-rwxr-xr-x	2023-10-02 14:11
grub-glue-efi	245.01 KB	-rwxr-xr-x	2023-10-02 14:11
grub-kbdcomp	1.64 KB	-rwxr-xr-x	2023-10-02 14:11
grub-menulst2cfg	229.05 KB	-rwxr-xr-x	2023-10-02 14:11
grub-mkfont	273.66 KB	-rwxr-xr-x	2023-10-02 14:11
grub-mkimage	354.2 KB	-rwxr-xr-x	2023-10-02 14:11
grub-mklayout	249.29 KB	-rwxr-xr-x	2023-10-02 14:11
grub-mknetdir	410.99 KB	-rwxr-xr-x	2023-10-02 14:11
grub-mkpasswd-pbkdf2	257.35 KB	-rwxr-xr-x	2023-10-02 14:11
grub-mkrelpath	244.7 KB	-rwxr-xr-x	2023-10-02 14:11
grub-mkrescue	987.84 KB	-rwxr-xr-x	2023-10-02 14:11
grub-mkstandalone	487.32 KB	-rwxr-xr-x	2023-10-02 14:11
grub-mount	754.05 KB	-rwxr-xr-x	2023-10-02 14:11
grub-ntldr-img	34.58 KB	-rwxr-xr-x	2023-10-02 14:11
grub-render-label	822.01 KB	-rwxr-xr-x	2023-10-02 14:11
grub-script-check	272.82 KB	-rwxr-xr-x	2023-10-02 14:11
grub-syslinux2cfg	770.52 KB	-rwxr-xr-x	2023-10-02 14:11
gsettings	26.31 KB	-rwxr-xr-x	2024-11-14 09:42
gtbl	146.43 KB	-rwxr-xr-x	2023-03-07 09:38
gunzip	2.29 KB	-rwxr-xr-x	2022-04-10 02:22
gzexe	6.3 KB	-rwxr-xr-x	2022-04-10 02:22
gzip	95.84 KB	-rwxr-xr-x	2022-04-10 02:22
h2ph	28.54 KB	-rwxr-xr-x	2023-11-25 20:59
h2xs	59.51 KB	-rwxr-xr-x	2023-11-25 20:59
hardlink	50.39 KB	-rwxr-xr-x	2024-11-21 20:01
hd	58.32 KB	-rwxr-xr-x	2024-11-21 20:01
head	46.95 KB	-rwxr-xr-x	2022-09-20 15:27
helpztags	2.46 KB	-rwxr-xr-x	2025-02-16 05:23
hexdump	58.32 KB	-rwxr-xr-x	2024-11-21 20:01
host	114.7 KB	-rwxr-xr-x	2025-01-25 10:14
hostid	38.83 KB	-rwxr-xr-x	2022-09-20 15:27
hostname	22.15 KB	-rwxr-xr-x	2022-12-19 13:33
hostnamectl	30.38 KB	-rwxr-xr-x	2025-03-06 14:56
htcacheclean	34.24 KB	-rwxr-xr-x	2024-10-04 15:21
htdbm	26.23 KB	-rwxr-xr-x	2024-10-04 15:21
htdigest	14.23 KB	-rwxr-xr-x	2024-10-04 15:21
htpasswd	26.23 KB	-rwxr-xr-x	2024-10-04 15:21
i386	26.58 KB	-rwxr-xr-x	2024-11-21 20:01
icombine	38.63 KB	-rwxr-xr-x	2022-03-29 18:19
iconv	63.13 KB	-rwxr-xr-x	2025-03-06 22:46
id	47.02 KB	-rwxr-xr-x	2022-09-20 15:27
ifnames	4.08 KB	-rwxr-xr-x	2023-01-14 17:42
ijoin	18.26 KB	-rwxr-xr-x	2022-03-29 18:19
inetutils-telnet	186.2 KB	-rwxr-xr-x	2023-08-23 10:01
infocmp	62.31 KB	-rwxr-xr-x	2023-05-07 14:33
infotocap	90.34 KB	-rwxr-xr-x	2023-05-07 14:33
innochecksum	4.56 MB	-rwxr-xr-x	2025-02-19 00:56
innotop	445.44 KB	-rwxr-xr-x	2025-02-19 00:56
install	155.8 KB	-rwxr-xr-x	2022-09-20 15:27
install_compass	14.85 KB	-rwxr-xr-x	2013-12-19 05:41
instmodsh	4.27 KB	-rwxr-xr-x	2023-11-25 20:59
ionice	34.31 KB	-rwxr-xr-x	2024-11-21 20:01
ip	674.82 KB	-rwxr-xr-x	2023-05-22 13:19
ipcmk	34.38 KB	-rwxr-xr-x	2024-11-21 20:01
ipcrm	34.31 KB	-rwxr-xr-x	2024-11-21 20:01
ipcs	74.31 KB	-rwxr-xr-x	2024-11-21 20:01
iptables-xml	88.98 KB	-rwxr-xr-x	2023-01-16 13:44
ischroot	14.32 KB	-rwxr-xr-x	2023-07-28 23:46
ispell	102.73 KB	-rwxr-xr-x	2022-03-29 18:19
ispell-wrapper	7.05 KB	-rwxr-xr-x	2023-03-14 21:17
join	54.98 KB	-rwxr-xr-x	2022-09-20 15:27
journalctl	74.64 KB	-rwxr-xr-x	2025-03-06 14:56
json_pp	4.88 KB	-rwxr-xr-x	2023-11-25 20:59
kbd_mode	14.82 KB	-rwxr-xr-x	2023-03-23 09:34
kbdinfo	14.53 KB	-rwxr-xr-x	2023-03-23 09:34
kbxutil	162.77 KB	-rwxr-xr-x	2023-03-26 13:03
kernel-install	12.75 KB	-rwxr-xr-x	2025-03-06 14:56
kill	22.3 KB	-rwxr-xr-x	2022-12-19 06:06
killall	31.95 KB	-rwxr-xr-x	2022-12-13 05:27
kmod	174.27 KB	-rwxr-xr-x	2022-12-10 00:02
laptop-detect	3.73 KB	-rwxr-xr-x	2017-08-12 15:24
last	50.31 KB	-rwxr-xr-x	2024-11-21 20:01
lastb	50.31 KB	-rwxr-xr-x	2024-11-21 20:01
lastlog	31.75 KB	-rwxr-xr-x	2023-03-23 12:40
lcf	7.6 KB	-rwxr-xr-x	2024-12-20 07:39
ld	1.27 MB	-rwxr-xr-x	2023-01-14 17:24
ld.bfd	1.27 MB	-rwxr-xr-x	2023-01-14 17:24
ld.gold	2.99 MB	-rwxr-xr-x	2023-01-14 17:24
ld.so	209.96 KB	-rwxr-xr-x	2025-03-06 22:46
ldd	5.28 KB	-rwxr-xr-x	2025-03-06 22:46
less	194.3 KB	-rwxr-xr-x	2024-05-02 18:30
lessecho	14.24 KB	-rwxr-xr-x	2024-05-02 18:30
lessfile	8.83 KB	-rwxr-xr-x	2024-05-02 18:30
lesskey	23.63 KB	-rwxr-xr-x	2024-05-02 18:30
lesspipe	8.83 KB	-rwxr-xr-x	2024-05-02 18:30
letsencrypt	958 B	-rwxr-xr-x	2023-04-16 05:22
lexgrog	107.48 KB	-rwxr-xr-x	2023-03-12 22:23
lft	2.43 KB	-rwxr-xr-x	2023-02-25 12:24
lft.db	2.43 KB	-rwxr-xr-x	2023-02-25 12:24
libnetcfg	15.41 KB	-rwxr-xr-x	2023-11-25 20:59
libtoolize	133.12 KB	-rwxr-xr-x	2024-04-09 20:04
link	38.83 KB	-rwxr-xr-x	2022-09-20 15:27
linux-boot-prober	1.54 KB	-rwxr-xr-x	2018-08-10 19:23
linux-check-removal	4.56 KB	-rwxr-xr-x	2018-09-05 17:52
linux-update-symlinks	6.17 KB	-rwxr-xr-x	2016-06-05 01:13
linux-version	2.63 KB	-rwxr-xr-x	2022-02-11 02:17
linux32	26.58 KB	-rwxr-xr-x	2024-11-21 20:01
linux64	26.58 KB	-rwxr-xr-x	2024-11-21 20:01
ln	71.12 KB	-rwxr-xr-x	2022-09-20 15:27
lnstat	26.59 KB	-rwxr-xr-x	2023-05-22 13:19
loadkeys	215.34 KB	-rwxr-xr-x	2023-03-23 09:34
loadunimap	38.87 KB	-rwxr-xr-x	2023-03-23 09:34
locale	46.16 KB	-rwxr-xr-x	2025-03-06 22:46
localectl	26.38 KB	-rwxr-xr-x	2025-03-06 14:56
localedef	291.91 KB	-rwxr-xr-x	2025-03-06 22:46
logger	54.9 KB	-rwxr-xr-x	2024-11-21 20:01
login	51.78 KB	-rwxr-xr-x	2023-03-23 12:40
loginctl	58.48 KB	-rwxr-xr-x	2025-03-06 14:56
logname	38.83 KB	-rwxr-xr-x	2022-09-20 15:27
logresolve	14.24 KB	-rwxr-xr-x	2024-10-04 15:21
look	18.31 KB	-rwxr-xr-x	2024-11-21 20:01
ls	147.8 KB	-rwxr-xr-x	2022-09-20 15:27
lsattr	14.24 KB	-rwxr-xr-x	2023-03-05 03:16
lsb_release	2.59 KB	-rwxr-xr-x	2022-09-26 20:06
lsblk	202.31 KB	-rwxr-xr-x	2024-11-21 20:01
lscpu	126.31 KB	-rwxr-xr-x	2024-11-21 20:01
lsfd	120.3 KB	-rwxr-xr-x	2024-11-21 20:01
lsinitramfs	735 B	-rwxr-xr-x	2024-08-22 19:30
lsipc	98.31 KB	-rwxr-xr-x	2024-11-21 20:01
lsirq	34.48 KB	-rwxr-xr-x	2024-11-21 20:01
lslocks	70.7 KB	-rwxr-xr-x	2024-11-21 20:01
lslogins	94.31 KB	-rwxr-xr-x	2024-11-21 20:01
lsmem	66.31 KB	-rwxr-xr-x	2024-11-21 20:01
lsmod	174.27 KB	-rwxr-xr-x	2022-12-10 00:02
lsns	82.31 KB	-rwxr-xr-x	2024-11-21 20:01
lsof	175.61 KB	-rwxr-xr-x	2022-04-28 04:08
lspci	104.04 KB	-rwxr-xr-x	2023-01-17 23:50
lspgpot	1.06 KB	-rwxr-xr-x	2017-08-28 10:22
lsusb	247.07 KB	-rwxr-xr-x	2024-01-24 21:32
lto-dump	30.47 MB	-rwxr-xr-x	2023-01-08 09:12
lto-dump-12	30.47 MB	-rwxr-xr-x	2023-01-08 09:12
lzcat	82.7 KB	-rwxr-xr-x	2025-04-03 19:55
lzcmp	7.25 KB	-rwxr-xr-x	2025-04-03 19:55
lzdiff	7.25 KB	-rwxr-xr-x	2025-04-03 19:55
lzegrep	10.09 KB	-rwxr-xr-x	2025-04-03 19:55
lzfgrep	10.09 KB	-rwxr-xr-x	2025-04-03 19:55
lzgrep	10.09 KB	-rwxr-xr-x	2025-04-03 19:55
lzless	1.77 KB	-rwxr-xr-x	2025-04-03 19:55
lzma	82.7 KB	-rwxr-xr-x	2025-04-03 19:55
lzmainfo	14.3 KB	-rwxr-xr-x	2025-04-03 19:55
lzmore	2.14 KB	-rwxr-xr-x	2025-04-03 19:55
m4	271.52 KB	-rwxr-xr-x	2023-02-03 13:00
make	234.65 KB	-rwxr-xr-x	2021-04-10 13:55
make-first-existing-target	4.79 KB	-rwxr-xr-x	2021-04-10 13:55
man	121.36 KB	-rwxr-xr-x	2023-03-12 22:23
man-recode	35.38 KB	-rwxr-xr-x	2023-03-12 22:23
mandb	147.61 KB	-rwxr-xr-x	2023-03-12 22:23
manpath	34.78 KB	-rwxr-xr-x	2023-03-12 22:23
mapscrn	34.84 KB	-rwxr-xr-x	2023-03-23 09:34
mariadb	5.06 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-access	109.31 KB	-rwxr-xr-x	2025-02-19 00:56
mariadb-admin	4.83 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-analyze	4.83 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-binlog	5.11 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-check	4.83 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-conv	4.55 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-convert-table-format	4.12 KB	-rwxr-xr-x	2025-02-19 00:56
mariadb-dump	4.92 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-dumpslow	8.05 KB	-rwxr-xr-x	2025-02-19 00:56
mariadb-find-rows	3.21 KB	-rwxr-xr-x	2025-02-19 00:56
mariadb-fix-extensions	1.22 KB	-rwxr-xr-x	2025-02-19 00:56
mariadb-hotcopy	34.52 KB	-rwxr-xr-x	2025-02-19 00:56
mariadb-import	4.82 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-install-db	22.13 KB	-rwxr-xr-x	2025-02-19 00:56
mariadb-optimize	4.83 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-plugin	4.52 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-repair	4.83 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-report	49.02 KB	-rwxr-xr-x	2025-02-19 00:56
mariadb-secure-installation	13.49 KB	-rwxr-xr-x	2025-02-19 00:56
mariadb-service-convert	2.45 KB	-rwxr-xr-x	2025-02-19 00:56
mariadb-setpermission	17.56 KB	-rwxr-xr-x	2025-02-19 00:56
mariadb-show	4.82 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-slap	4.84 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-tzinfo-to-sql	4.53 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-upgrade	4.96 MB	-rwxr-xr-x	2025-02-19 00:56
mariadb-waitpid	4.51 MB	-rwxr-xr-x	2025-02-19 00:56
mariadbcheck	4.83 MB	-rwxr-xr-x	2025-02-19 00:56
mariadbd-multi	26.69 KB	-rwxr-xr-x	2025-02-19 00:56
mariadbd-safe	30.42 KB	-rwxr-xr-x	2025-02-19 00:56
mariadbd-safe-helper	4.49 MB	-rwxr-xr-x	2025-02-19 00:56
mawk	154.66 KB	-rwxr-xr-x	2022-06-17 15:35
mcookie	34.38 KB	-rwxr-xr-x	2024-11-21 20:01
md5sum	50.95 KB	-rwxr-xr-x	2022-09-20 15:27
md5sum.textutils	50.95 KB	-rwxr-xr-x	2022-09-20 15:27
mdig	50.33 KB	-rwxr-xr-x	2025-01-25 10:14
memusage	7.29 KB	-rwxr-xr-x	2025-03-06 22:46
memusagestat	22.69 KB	-rwxr-xr-x	2025-03-06 22:46
mesg	18.3 KB	-rwxr-xr-x	2024-11-21 20:01
migrate-pubring-from-classic-gpg	2.99 KB	-rwxr-xr-x	2022-09-01 22:08
mk_modmap	15.78 KB	-rwxr-xr-x	2023-03-23 09:34
mkdir	95.27 KB	-rwxr-xr-x	2022-09-20 15:27
mkfifo	67.17 KB	-rwxr-xr-x	2022-09-20 15:27
mknod	71.2 KB	-rwxr-xr-x	2022-09-20 15:27
mktemp	42.92 KB	-rwxr-xr-x	2022-09-20 15:27
mongod	207.63 MB	-rwxr-xr-x	2013-12-19 05:41
mongodump	17.53 MB	-rwxr-xr-x	2025-04-01 15:22
mongoexport	17.26 MB	-rwxr-xr-x	2025-04-01 15:22
mongofiles	17.25 MB	-rwxr-xr-x	2025-04-01 15:22
mongoimport	17.44 MB	-rwxr-xr-x	2025-04-01 15:22
mongorestore	17.9 MB	-rwxr-xr-x	2025-04-01 15:22
mongos	160.52 MB	-rwxr-xr-x	2013-12-19 05:41
mongosh	142.35 MB	-rwxr-xr-x	2025-03-06 15:39
mongostat	17.05 MB	-rwxr-xr-x	2025-04-01 15:22
mongotop	16.67 MB	-rwxr-xr-x	2025-04-01 15:22
more	58.31 KB	-rwxr-xr-x	2024-11-21 20:01
mount	58.3 KB	-rwsr-xr-x	2024-11-21 20:01
mountpoint	18.3 KB	-rwxr-xr-x	2024-11-21 20:01
msgattrib	26.3 KB	-rwxr-xr-x	2023-02-26 15:20
msgcat	22.3 KB	-rwxr-xr-x	2023-02-26 15:20
msgcmp	26.3 KB	-rwxr-xr-x	2023-02-26 15:20
msgcomm	22.3 KB	-rwxr-xr-x	2023-02-26 15:20
msgconv	22.3 KB	-rwxr-xr-x	2023-02-26 15:20
msgen	22.3 KB	-rwxr-xr-x	2023-02-26 15:20
msgexec	18.3 KB	-rwxr-xr-x	2023-02-26 15:20
msgfilter	30.3 KB	-rwxr-xr-x	2023-02-26 15:20
msgfmt	86.5 KB	-rwxr-xr-x	2023-02-26 15:20
msggrep	114.42 KB	-rwxr-xr-x	2023-02-26 15:20
msginit	66.65 KB	-rwxr-xr-x	2023-02-26 15:20
msgmerge	70.68 KB	-rwxr-xr-x	2023-02-26 15:20
msgunfmt	34.32 KB	-rwxr-xr-x	2023-02-26 15:20
msguniq	22.3 KB	-rwxr-xr-x	2023-02-26 15:20
msql2mysql	1.41 KB	-rwxr-xr-x	2025-02-19 00:56
mt	83.38 KB	-rwxr-xr-x	2022-09-14 19:45
mt-gnu	83.38 KB	-rwxr-xr-x	2022-09-14 19:45
mtrace	6.35 KB	-rwxr-xr-x	2025-03-06 22:46
munchlist	31.23 KB	-rwxr-xr-x	2022-03-29 18:19
mv	139.62 KB	-rwxr-xr-x	2022-09-20 15:27
my_print_defaults	4.52 MB	-rwxr-xr-x	2025-02-19 00:56
myisam_ftdump	4.85 MB	-rwxr-xr-x	2025-02-19 00:56
myisamchk	4.97 MB	-rwxr-xr-x	2025-02-19 00:56
myisamlog	4.83 MB	-rwxr-xr-x	2025-02-19 00:56
myisampack	4.88 MB	-rwxr-xr-x	2025-02-19 00:56
mysql	5.06 MB	-rwxr-xr-x	2025-02-19 00:56
mysql_convert_table_format	4.12 KB	-rwxr-xr-x	2025-02-19 00:56
mysql_find_rows	3.21 KB	-rwxr-xr-x	2025-02-19 00:56
mysql_fix_extensions	1.22 KB	-rwxr-xr-x	2025-02-19 00:56
mysql_install_db	22.13 KB	-rwxr-xr-x	2025-02-19 00:56
mysql_plugin	4.52 MB	-rwxr-xr-x	2025-02-19 00:56
mysql_secure_installation	13.49 KB	-rwxr-xr-x	2025-02-19 00:56
mysql_setpermission	17.56 KB	-rwxr-xr-x	2025-02-19 00:56
mysql_tzinfo_to_sql	4.53 MB	-rwxr-xr-x	2025-02-19 00:56
mysql_upgrade	4.96 MB	-rwxr-xr-x	2025-02-19 00:56
mysql_waitpid	4.51 MB	-rwxr-xr-x	2025-02-19 00:56
mysqlaccess	109.31 KB	-rwxr-xr-x	2025-02-19 00:56
mysqladmin	4.83 MB	-rwxr-xr-x	2025-02-19 00:56
mysqlanalyze	4.83 MB	-rwxr-xr-x	2025-02-19 00:56
mysqlbinlog	5.11 MB	-rwxr-xr-x	2025-02-19 00:56
mysqlcheck	4.83 MB	-rwxr-xr-x	2025-02-19 00:56
mysqld_multi	26.69 KB	-rwxr-xr-x	2025-02-19 00:56
mysqld_safe	30.42 KB	-rwxr-xr-x	2025-02-19 00:56
mysqld_safe_helper	4.49 MB	-rwxr-xr-x	2025-02-19 00:56
mysqldump	4.92 MB	-rwxr-xr-x	2025-02-19 00:56
mysqldumpslow	8.05 KB	-rwxr-xr-x	2025-02-19 00:56
mysqlhotcopy	34.52 KB	-rwxr-xr-x	2025-02-19 00:56
mysqlimport	4.82 MB	-rwxr-xr-x	2025-02-19 00:56
mysqloptimize	4.83 MB	-rwxr-xr-x	2025-02-19 00:56
mysqlrepair	4.83 MB	-rwxr-xr-x	2025-02-19 00:56
mysqlreport	49.02 KB	-rwxr-xr-x	2025-02-19 00:56
mysqlshow	4.82 MB	-rwxr-xr-x	2025-02-19 00:56
mysqlslap	4.84 MB	-rwxr-xr-x	2025-02-19 00:56
mytop	71.95 KB	-rwxr-xr-x	2025-02-19 00:56
namei	34.31 KB	-rwxr-xr-x	2024-11-21 20:01
nano	280.74 KB	-rwxr-xr-x	2024-05-06 06:10
nawk	696.44 KB	-rwxr-xr-x	2023-02-19 13:30
nc	34.13 KB	-rwxr-xr-x	2021-08-20 11:41
nc.traditional	34.13 KB	-rwxr-xr-x	2021-08-20 11:41
neqn	913 B	-rwxr-xr-x	2023-03-07 09:38
netcat	34.13 KB	-rwxr-xr-x	2021-08-20 11:41
networkctl	106.38 KB	-rwxr-xr-x	2025-03-06 14:56
newgrp	47.75 KB	-rwsr-xr-x	2023-03-23 12:40
ngettext	34.31 KB	-rwxr-xr-x	2023-02-26 15:20
nice	42.86 KB	-rwxr-xr-x	2022-09-20 15:27
nisdomainname	22.15 KB	-rwxr-xr-x	2022-12-19 13:33
nl	111.11 KB	-rwxr-xr-x	2022-09-20 15:27
nm	44.03 KB	-rwxr-xr-x	2023-01-14 17:24
node	97.47 MB	-rwxr-xr-x	2024-04-10 12:32
nodejs	97.47 MB	-rwxr-xr-x	2024-04-10 12:32
nohup	42.89 KB	-rwxr-xr-x	2022-09-20 15:27
normalizer	244 B	-rwxr-xr-x	2022-11-27 08:00
npm	54 B	-rwxr-xr-x	2022-10-11 10:59
nproc	42.89 KB	-rwxr-xr-x	2022-09-20 15:27
npx	2.86 KB	-rwxr-xr-x	2023-08-09 13:29
nroff	3.22 KB	-rwxr-xr-x	2023-03-07 09:38
nsenter	34.54 KB	-rwxr-xr-x	2024-11-21 20:01
nslookup	114.74 KB	-rwxr-xr-x	2025-01-25 10:14
nstat	104.45 KB	-rwxr-xr-x	2023-05-22 13:19
nsupdate	74.55 KB	-rwxr-xr-x	2025-01-25 10:14
numfmt	67.02 KB	-rwxr-xr-x	2022-09-20 15:27
objcopy	155.66 KB	-rwxr-xr-x	2023-01-14 17:24
objdump	362.56 KB	-rwxr-xr-x	2023-01-14 17:24
od	79.02 KB	-rwxr-xr-x	2022-09-20 15:27
open	18.06 KB	-rwxr-xr-x	2021-11-29 13:07
openssl	953.26 KB	-rwxr-xr-x	2024-10-27 14:16
openvt	23.13 KB	-rwxr-xr-x	2023-03-23 09:34
os-prober	4.42 KB	-rwxr-xr-x	2021-09-22 18:07
pager	194.3 KB	-rwxr-xr-x	2024-05-02 18:30
partx	118.31 KB	-rwxr-xr-x	2024-11-21 20:01
passwd	66.65 KB	-rwsr-xr-x	2023-03-23 12:40
paste	42.89 KB	-rwxr-xr-x	2022-09-20 15:27
patch	187.44 KB	-rwxr-xr-x	2021-01-09 08:58
pathchk	42.86 KB	-rwxr-xr-x	2022-09-20 15:27
pcre2-config	1.93 KB	-rwxr-xr-x	2023-01-01 15:44
pdb3	62.4 KB	-rwxr-xr-x	2024-11-30 21:22
pdb3.11	62.4 KB	-rwxr-xr-x	2024-11-30 21:22
pear	793 B	-rwxr-xr-x	2023-06-12 06:24
peardev	814 B	-rwxr-xr-x	2023-06-12 06:24
pecl	727 B	-rwxr-xr-x	2023-06-12 06:24
peekfd	14.5 KB	-rwxr-xr-x	2022-12-13 05:27
perl	3.63 MB	-rwxr-xr-x	2023-11-25 20:59
perl5.36-x86_64-linux-gnu	14.41 KB	-rwxr-xr-x	2023-11-25 20:59
perl5.36.0	3.63 MB	-rwxr-xr-x	2023-11-25 20:59
perlbug	44.12 KB	-rwxr-xr-x	2023-11-25 20:59
perldoc	125 B	-rwxr-xr-x	2023-07-05 08:56
perlivp	10.61 KB	-rwxr-xr-x	2023-11-25 20:59
perlthanks	44.12 KB	-rwxr-xr-x	2023-11-25 20:59
perror	4.71 MB	-rwxr-xr-x	2025-02-19 00:56
pgrep	34.42 KB	-rwxr-xr-x	2022-12-19 06:06
phar	14.88 KB	-rwxr-xr-x	2025-10-01 20:26
phar.default	14.88 KB	-rwxr-xr-x	2025-10-01 20:26
phar.phar	14.88 KB	-rwxr-xr-x	2025-10-01 20:26
phar.phar.default	14.88 KB	-rwxr-xr-x	2025-10-01 20:26
phar.phar8.2	14.88 KB	-rwxr-xr-x	2025-03-13 18:10
phar.phar8.4	14.88 KB	-rwxr-xr-x	2025-10-01 20:26
phar8.2	14.88 KB	-rwxr-xr-x	2025-03-13 18:10
phar8.2.phar	14.88 KB	-rwxr-xr-x	2025-03-13 18:10
phar8.4	14.88 KB	-rwxr-xr-x	2025-10-01 20:26
phar8.4.phar	14.88 KB	-rwxr-xr-x	2025-10-01 20:26
php	5.72 MB	-rwxr-xr-x	2025-10-01 20:26
php-config	4.24 KB	-rwxr-xr-x	2025-03-13 18:10
php-config8.2	4.24 KB	-rwxr-xr-x	2025-03-13 18:10
php.default	5.72 MB	-rwxr-xr-x	2025-10-01 20:26
php8.2	5.4 MB	-rwxr-xr-x	2025-03-13 18:10
php8.4	5.72 MB	-rwxr-xr-x	2025-10-01 20:26
phpabtpl	8.47 KB	-rwxr-xr-x	2023-01-28 15:13
phpize	4.83 KB	-rwxr-xr-x	2025-03-13 18:10
phpize8.2	4.83 KB	-rwxr-xr-x	2025-03-13 18:10
pic	220.27 KB	-rwxr-xr-x	2023-03-07 09:38
pico	280.74 KB	-rwxr-xr-x	2024-05-06 06:10
piconv	8.16 KB	-rwxr-xr-x	2023-11-25 20:59
pidof	26.31 KB	-rwxr-xr-x	2023-04-03 06:25
pidwait	34.42 KB	-rwxr-xr-x	2022-12-19 06:06
pinentry	70.57 KB	-rwxr-xr-x	2022-10-18 14:52
pinentry-curses	70.57 KB	-rwxr-xr-x	2022-10-18 14:52
ping	88.45 KB	-rwxr-xr-x	2024-09-24 17:00
ping4	88.45 KB	-rwxr-xr-x	2024-09-24 17:00
ping6	88.45 KB	-rwxr-xr-x	2024-09-24 17:00
pinky	47.05 KB	-rwxr-xr-x	2022-09-20 15:27
pip	221 B	-rwxr-xr-x	2023-02-19 14:19
pip3	221 B	-rwxr-xr-x	2023-02-19 14:19
pip3.11	221 B	-rwxr-xr-x	2023-02-19 14:19
pkaction	18.23 KB	-rwxr-xr-x	2023-01-31 22:05
pkcheck	22.3 KB	-rwxr-xr-x	2023-01-31 22:05
pkcon	55.61 KB	-rwxr-xr-x	2023-05-28 17:00
pkg-config	44.04 KB	-rwxr-xr-x	2023-01-22 11:06
pkgconf	44.04 KB	-rwxr-xr-x	2023-01-22 11:06
pkgtools	1.34 KB	-rwxr-xr-x	2023-01-28 15:13
pkill	34.42 KB	-rwxr-xr-x	2022-12-19 06:06
pkmon	22.79 KB	-rwxr-xr-x	2023-05-28 17:00
pkttyagent	18.23 KB	-rwxr-xr-x	2023-01-31 22:05
pl2pm	4.43 KB	-rwxr-xr-x	2023-11-25 20:59
pldd	22.69 KB	-rwxr-xr-x	2025-03-06 22:46
pm2	56 B	-rwxr-xr-x	2025-04-08 13:05
pm2-dev	59 B	-rwxr-xr-x	2025-04-08 13:05
pm2-docker	67 B	-rwxr-xr-x	2025-04-08 13:05
pm2-runtime	67 B	-rwxr-xr-x	2025-04-08 13:05
pmap	34.34 KB	-rwxr-xr-x	2022-12-19 06:06
po2debconf	8.47 KB	-rwxr-xr-x	2020-12-30 01:09
pod2html	4.04 KB	-rwxr-xr-x	2023-11-25 20:59
pod2man	14.68 KB	-rwxr-xr-x	2023-11-25 20:59
pod2text	10.55 KB	-rwxr-xr-x	2023-11-25 20:59
pod2usage	4.01 KB	-rwxr-xr-x	2023-11-25 20:59
podchecker	3.57 KB	-rwxr-xr-x	2023-11-25 20:59
podebconf-display-po	12.67 KB	-rwxr-xr-x	2015-01-10 14:10
podebconf-report-po	31.76 KB	-rwxr-xr-x	2015-01-10 15:44
pr	79.11 KB	-rwxr-xr-x	2022-09-20 15:27
preconv	66.43 KB	-rwxr-xr-x	2023-03-07 09:38
print	18.06 KB	-rwxr-xr-x	2021-11-29 13:07
printenv	34.83 KB	-rwxr-xr-x	2022-09-20 15:27
printf	62.92 KB	-rwxr-xr-x	2022-09-20 15:27
prlimit	38.83 KB	-rwxr-xr-x	2024-11-21 20:01
procan	79.91 KB	-rwxr-xr-x	2022-11-06 08:15
prove	13.34 KB	-rwxr-xr-x	2023-11-25 20:59
prtstat	18.57 KB	-rwxr-xr-x	2022-12-13 05:27
ps	142.93 KB	-rwxr-xr-x	2022-12-19 06:06
psfaddtable	30.62 KB	-rwxr-xr-x	2023-03-23 09:34
psfgettable	30.62 KB	-rwxr-xr-x	2023-03-23 09:34
psfstriptable	30.62 KB	-rwxr-xr-x	2023-03-23 09:34
psfxtable	30.62 KB	-rwxr-xr-x	2023-03-23 09:34
pslog	14.45 KB	-rwxr-xr-x	2022-12-13 05:27
pstree	35.78 KB	-rwxr-xr-x	2022-12-13 05:27
pstree.x11	35.78 KB	-rwxr-xr-x	2022-12-13 05:27
ptar	3.48 KB	-rwxr-xr-x	2023-11-25 20:59
ptardiff	2.58 KB	-rwxr-xr-x	2023-11-25 20:59
ptargrep	4.29 KB	-rwxr-xr-x	2023-11-25 20:59
ptx	135.23 KB	-rwxr-xr-x	2022-09-20 15:27
pv	63.98 KB	-rwxr-xr-x	2022-04-12 00:55
pwd	42.92 KB	-rwxr-xr-x	2022-09-20 15:27
pwdx	14.3 KB	-rwxr-xr-x	2022-12-19 06:06
py3clean	7.63 KB	-rwxr-xr-x	2023-04-09 10:22
py3compile	13 KB	-rwxr-xr-x	2023-04-09 10:22
py3versions	12.52 KB	-rwxr-xr-x	2023-04-09 10:22
pydoc3	79 B	-rwxr-xr-x	2024-11-30 21:22
pydoc3.11	79 B	-rwxr-xr-x	2024-11-30 21:22
pygettext3	23.67 KB	-rwxr-xr-x	2023-02-07 13:37
pygettext3.11	23.67 KB	-rwxr-xr-x	2023-02-07 13:37
python3	6.52 MB	-rwxr-xr-x	2024-11-30 21:22
python3-config	3 KB	-rwxr-xr-x	2024-11-30 21:22
python3.11	6.52 MB	-rwxr-xr-x	2024-11-30 21:22
python3.11-config	3 KB	-rwxr-xr-x	2024-11-30 21:22
pzstd	742.38 KB	-rwxr-xr-x	2023-03-18 20:58
querybts	10.64 KB	-rwxr-xr-x	2023-04-29 06:38
ranlib	51.17 KB	-rwxr-xr-x	2023-01-14 17:24
rbash	1.21 MB	-rwxr-xr-x	2024-03-29 19:40
rdma	180.6 KB	-rwxr-xr-x	2023-05-22 13:19
readelf	751.38 KB	-rwxr-xr-x	2023-01-14 17:24
readlink	50.89 KB	-rwxr-xr-x	2022-09-20 15:27
realpath	50.92 KB	-rwxr-xr-x	2022-09-20 15:27
recode-sr-latin	14.3 KB	-rwxr-xr-x	2023-02-26 15:20
redis-benchmark	738.63 KB	-rwxr-xr-x	2025-01-19 10:41
redis-check-aof	2.28 MB	-rwxr-xr-x	2025-01-19 10:41
redis-check-rdb	2.28 MB	-rwxr-xr-x	2025-01-19 10:41
redis-cli	366.27 KB	-rwxr-xr-x	2025-01-19 10:41
redis-server	2.28 MB	-rwxr-xr-x	2025-01-19 10:41
rename.ul	22.3 KB	-rwxr-xr-x	2024-11-21 20:01
renice	14.3 KB	-rwxr-xr-x	2024-11-21 20:01
replace	4.5 MB	-rwxr-xr-x	2025-02-19 00:56
report-hw	2.06 KB	-rwxr-xr-x	2021-09-22 18:06
reportbug	110.11 KB	-rwxr-xr-x	2023-04-29 06:38
reset	30.24 KB	-rwxr-xr-x	2023-05-07 14:33
resizecons	26.8 KB	-rwxr-xr-x	2023-03-23 09:34
resizepart	70.31 KB	-rwxr-xr-x	2024-11-21 20:01
resolve_stack_dump	4.52 MB	-rwxr-xr-x	2025-02-19 00:56
resolveip	4.52 MB	-rwxr-xr-x	2025-02-19 00:56
rev	14.3 KB	-rwxr-xr-x	2024-11-21 20:01
rgrep	30 B	-rwxr-xr-x	2020-01-29 12:09
rm	71.05 KB	-rwxr-xr-x	2022-09-20 15:27
rmdir	54.92 KB	-rwxr-xr-x	2022-09-20 15:27
rnano	280.74 KB	-rwxr-xr-x	2024-05-06 06:10
rotatelogs	26.31 KB	-rwxr-xr-x	2024-10-04 15:21
routel	1.62 KB	-rwxr-xr-x	2023-05-22 13:19
rpcgen	95 KB	-rwxr-xr-x	2022-12-02 21:30
rrsync	12.34 KB	-rwxr-xr-x	2025-01-15 18:47
rsync	502.38 KB	-rwxr-xr-x	2025-01-15 18:47
rsync-ssl	5.02 KB	-rwxr-xr-x	2025-01-15 18:47
rtstat	26.59 KB	-rwxr-xr-x	2023-05-22 13:19
run-mailcap	18.06 KB	-rwxr-xr-x	2021-11-29 13:07
run-parts	26.91 KB	-rwxr-xr-x	2023-07-28 23:46
runcon	42.95 KB	-rwxr-xr-x	2022-09-20 15:27
rview	1.55 MB	-rwxr-xr-x	2025-02-16 05:23
savelog	10.24 KB	-rwxr-xr-x	2023-07-28 23:46
scp	266.63 KB	-rwxr-xr-x	2025-02-14 13:06
screendump	14.47 KB	-rwxr-xr-x	2023-03-23 09:34
script	70.3 KB	-rwxr-xr-x	2024-11-21 20:01
scriptlive	54.3 KB	-rwxr-xr-x	2024-11-21 20:01
scriptreplay	46.3 KB	-rwxr-xr-x	2024-11-21 20:01
sdiff	55.08 KB	-rwxr-xr-x	2023-02-03 19:00
sed	123.46 KB	-rwxr-xr-x	2023-01-05 19:55
see	18.06 KB	-rwxr-xr-x	2021-11-29 13:07
select-default-iwrap	474 B	-rwxr-xr-x	2023-03-14 21:17
select-editor	2.39 KB	-rwxr-xr-x	2023-01-14 16:28
sensible-browser	1.26 KB	-rwxr-xr-x	2023-01-14 16:28
sensible-editor	1.24 KB	-rwxr-xr-x	2023-01-14 16:28
sensible-pager	565 B	-rwxr-xr-x	2023-01-14 16:28
seq	58.92 KB	-rwxr-xr-x	2022-09-20 15:27
setarch	26.58 KB	-rwxr-xr-x	2024-11-21 20:01
setfont	58.9 KB	-rwxr-xr-x	2023-03-23 09:34
setkeycodes	14.52 KB	-rwxr-xr-x	2023-03-23 09:34
setleds	18.55 KB	-rwxr-xr-x	2023-03-23 09:34
setlogcons	14.52 KB	-rwxr-xr-x	2023-03-23 09:34
setmetamode	14.66 KB	-rwxr-xr-x	2023-03-23 09:34
setpci	30.31 KB	-rwxr-xr-x	2023-01-17 23:50
setpriv	78.31 KB	-rwxr-xr-x	2024-11-21 20:01
setsid	14.3 KB	-rwxr-xr-x	2024-11-21 20:01
setterm	46.31 KB	-rwxr-xr-x	2024-11-21 20:01
setupcon	39.35 KB	-rwxr-xr-x	2023-05-21 21:30
setvtrgb	14.65 KB	-rwxr-xr-x	2023-03-23 09:34
sftp	282.59 KB	-rwxr-xr-x	2025-02-14 13:06
sg	47.75 KB	-rwsr-xr-x	2023-03-23 12:40
sh	122.7 KB	-rwxr-xr-x	2023-01-05 13:20
sha1sum	54.95 KB	-rwxr-xr-x	2022-09-20 15:27
sha224sum	58.95 KB	-rwxr-xr-x	2022-09-20 15:27
sha256sum	58.95 KB	-rwxr-xr-x	2022-09-20 15:27
sha384sum	62.95 KB	-rwxr-xr-x	2022-09-20 15:27
sha512sum	62.95 KB	-rwxr-xr-x	2022-09-20 15:27
shasum	9.75 KB	-rwxr-xr-x	2023-11-25 20:59
showconsolefont	22.57 KB	-rwxr-xr-x	2023-03-23 09:34
showkey	18.56 KB	-rwxr-xr-x	2023-03-23 09:34
shred	63.14 KB	-rwxr-xr-x	2022-09-20 15:27
shtool	138.76 KB	-rwxr-xr-x	2019-12-23 21:26
shtoolize	15.16 KB	-rwxr-xr-x	2019-12-23 21:26
shuf	58.98 KB	-rwxr-xr-x	2022-09-20 15:27
size	26.86 KB	-rwxr-xr-x	2023-01-14 17:24
skill	30.33 KB	-rwxr-xr-x	2022-12-19 06:06
slabtop	22.37 KB	-rwxr-xr-x	2022-12-19 06:06
sleep	42.86 KB	-rwxr-xr-x	2022-09-20 15:27
slogin	1.07 MB	-rwxr-xr-x	2025-02-14 13:06
snice	30.33 KB	-rwxr-xr-x	2022-12-19 06:06
socat	401.98 KB	-rwxr-xr-x	2022-11-06 08:15
soelim	50.43 KB	-rwxr-xr-x	2023-03-07 09:38
sort	115.68 KB	-rwxr-xr-x	2022-09-20 15:27
sotruss	4.18 KB	-rwxr-xr-x	2025-03-06 22:46
splain	18.99 KB	-rwxr-xr-x	2023-11-25 20:59
split	59.55 KB	-rwxr-xr-x	2022-09-20 15:27
splitfont	14.39 KB	-rwxr-xr-x	2023-03-23 09:34
sprof	26.81 KB	-rwxr-xr-x	2025-03-06 22:46
ss	189.14 KB	-rwxr-xr-x	2023-05-22 13:19
ssh	1.07 MB	-rwxr-xr-x	2025-02-14 13:06
ssh-add	518.44 KB	-rwxr-xr-x	2025-02-14 13:06
ssh-agent	474.38 KB	-rwxr-sr-x	2025-02-14 13:06
ssh-argv0	1.42 KB	-rwxr-xr-x	2025-02-14 11:18
ssh-copy-id	12.38 KB	-rwxr-xr-x	2023-02-02 12:21
ssh-keygen	646.44 KB	-rwxr-xr-x	2025-02-14 13:06
ssh-keyscan	622.47 KB	-rwxr-xr-x	2025-02-14 13:06
stat	95.2 KB	-rwxr-xr-x	2022-09-20 15:27
stdbuf	58.92 KB	-rwxr-xr-x	2022-09-20 15:27
streamzip	7.75 KB	-rwxr-xr-x	2023-11-25 20:59
strings	30.98 KB	-rwxr-xr-x	2023-01-14 17:24
strip	155.7 KB	-rwxr-xr-x	2023-01-14 17:24
stty	83.02 KB	-rwxr-xr-x	2022-09-20 15:27
su	70.31 KB	-rwsr-xr-x	2024-11-21 20:01
sudo	275.02 KB	-rwsr-xr-x	2023-06-27 11:45
sudoedit	275.02 KB	-rwsr-xr-x	2023-06-27 11:45
sudoreplay	115.7 KB	-rwxr-xr-x	2023-06-27 11:45
sum	50.96 KB	-rwxr-xr-x	2022-09-20 15:27
sync	38.89 KB	-rwxr-xr-x	2022-09-20 15:27
systemctl	1.29 MB	-rwxr-xr-x	2025-03-06 14:56
systemd	90.38 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-analyze	182.61 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-ask-password	18.48 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-cat	18.38 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-cgls	22.48 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-cgtop	38.4 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-creds	42.61 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-cryptenroll	58.6 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-delta	26.38 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-detect-virt	18.37 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-escape	18.37 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-firstboot	50.59 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-hwdb	126.66 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-id128	22.37 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-inhibit	22.39 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-machine-id-setup	18.48 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-mount	50.59 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-notify	18.38 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-path	18.37 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-repart	150.69 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-run	58.57 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-socket-activate	26.38 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-stdio-bridge	18.38 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-sysext	42.49 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-sysusers	62.68 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-tmpfiles	110.57 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-tty-ask-password-agent	34.38 KB	-rwxr-xr-x	2025-03-06 14:56
systemd-umount	50.59 KB	-rwxr-xr-x	2025-03-06 14:56
tabs	18.23 KB	-rwxr-xr-x	2023-05-07 14:33
tac	111.05 KB	-rwxr-xr-x	2022-09-20 15:27
tail	75.14 KB	-rwxr-xr-x	2022-09-20 15:27
tar	519.52 KB	-rwxr-xr-x	2024-01-20 09:27
tasksel	26.82 KB	-rwxr-xr-x	2023-05-25 06:27
taskset	62.31 KB	-rwxr-xr-x	2024-11-21 20:01
tbl	146.43 KB	-rwxr-xr-x	2023-03-07 09:38
tee	42.95 KB	-rwxr-xr-x	2022-09-20 15:27
telnet	186.2 KB	-rwxr-xr-x	2023-08-23 10:01
tempfile	14.18 KB	-rwxr-xr-x	2023-07-28 23:46
test	58.89 KB	-rwxr-xr-x	2022-09-20 15:27
tic	90.34 KB	-rwxr-xr-x	2023-05-07 14:33
timedatectl	42.37 KB	-rwxr-xr-x	2025-03-06 14:56
timeout	47.49 KB	-rwxr-xr-x	2022-09-20 15:27
tload	18.32 KB	-rwxr-xr-x	2022-12-19 06:06
toe	22.23 KB	-rwxr-xr-x	2023-05-07 14:33
top	131.58 KB	-rwxr-xr-x	2022-12-19 06:06
touch	107.05 KB	-rwxr-xr-x	2022-09-20 15:27
tput	26.27 KB	-rwxr-xr-x	2023-05-07 14:33
tr	54.89 KB	-rwxr-xr-x	2022-09-20 15:27
traceproto	2.82 KB	-rwxr-xr-x	2023-02-25 12:24
traceproto.db	2.82 KB	-rwxr-xr-x	2023-02-25 12:24
traceroute	71.23 KB	-rwxr-xr-x	2023-02-25 12:24
traceroute-nanog	1.58 KB	-rwxr-xr-x	2023-02-25 12:24
traceroute.db	71.23 KB	-rwxr-xr-x	2023-02-25 12:24
traceroute6	71.23 KB	-rwxr-xr-x	2023-02-25 12:24
traceroute6.db	71.23 KB	-rwxr-xr-x	2023-02-25 12:24
troff	755.83 KB	-rwxr-xr-x	2023-03-07 09:38
true	34.83 KB	-rwxr-xr-x	2022-09-20 15:27
truncate	42.89 KB	-rwxr-xr-x	2022-09-20 15:27
tryaffix	4.8 KB	-rwxr-xr-x	2022-03-29 18:19
tset	30.24 KB	-rwxr-xr-x	2023-05-07 14:33
tsort	54.89 KB	-rwxr-xr-x	2022-09-20 15:27
tty	34.86 KB	-rwxr-xr-x	2022-09-20 15:27
tzselect	14.99 KB	-rwxr-xr-x	2025-03-06 22:46
ucf	40.69 KB	-rwxr-xr-x	2024-12-20 07:39
ucfq	18.91 KB	-rwxr-xr-x	2024-12-20 07:39
ucfr	10.85 KB	-rwxr-xr-x	2024-12-20 07:39
uclampset	62.31 KB	-rwxr-xr-x	2024-11-21 20:01
udevadm	1.29 MB	-rwxr-xr-x	2025-03-06 14:56
ul	22.31 KB	-rwxr-xr-x	2024-11-21 20:01
umount	34.3 KB	-rwsr-xr-x	2024-11-21 20:01
uname	42.86 KB	-rwxr-xr-x	2022-09-20 15:27
uncompress	2.29 KB	-rwxr-xr-x	2022-04-10 02:22
unexpand	42.92 KB	-rwxr-xr-x	2022-09-20 15:27
unicode_start	2.71 KB	-rwxr-xr-x	2023-03-23 09:34
unicode_stop	528 B	-rwxr-xr-x	2023-03-23 09:34
uniq	46.95 KB	-rwxr-xr-x	2022-09-20 15:27
unlink	38.83 KB	-rwxr-xr-x	2022-09-20 15:27
unlzma	82.7 KB	-rwxr-xr-x	2025-04-03 19:55
unmkinitramfs	3.59 KB	-rwxr-xr-x	2024-08-22 19:30
unshare	82.54 KB	-rwxr-xr-x	2024-11-21 20:01
unxz	82.7 KB	-rwxr-xr-x	2025-04-03 19:55
unzip	175.05 KB	-rwxr-xr-x	2023-02-19 18:02
unzipsfx	82.86 KB	-rwxr-xr-x	2023-02-19 18:02
unzstd	1.22 MB	-rwxr-xr-x	2023-03-18 20:58
update-alternatives	58.31 KB	-rwxr-xr-x	2023-05-11 02:04
update-mime-database	59.27 KB	-rwxr-xr-x	2022-04-29 17:19
uptime	14.3 KB	-rwxr-xr-x	2022-12-19 06:06
usb-devices	4.35 KB	-rwxr-xr-x	2024-01-24 21:32
usbhid-dump	30.76 KB	-rwxr-xr-x	2024-01-24 21:32
usbreset	14.46 KB	-rwxr-xr-x	2024-01-24 21:32
users	38.89 KB	-rwxr-xr-x	2022-09-20 15:27
utmpdump	30.3 KB	-rwxr-xr-x	2024-11-21 20:01
vdir	147.8 KB	-rwxr-xr-x	2022-09-20 15:27
vi	1.55 MB	-rwxr-xr-x	2025-02-16 05:23
view	1.55 MB	-rwxr-xr-x	2025-02-16 05:23
vim.tiny	1.55 MB	-rwxr-xr-x	2025-02-16 05:23
vmstat	34.72 KB	-rwxr-xr-x	2022-12-19 06:06
w	22.3 KB	-rwxr-xr-x	2022-12-19 06:06
wall	38.3 KB	-rwxr-xr-x	2024-11-21 20:01
watch	26.71 KB	-rwxr-xr-x	2022-12-19 06:06
watchgnupg	18.23 KB	-rwxr-xr-x	2023-03-26 13:03
wc	51.05 KB	-rwxr-xr-x	2022-09-20 15:27
wdctl	70.34 KB	-rwxr-xr-x	2024-11-21 20:01
wget	459.36 KB	-rwxr-xr-x	2025-03-03 13:32
whatis	51.29 KB	-rwxr-xr-x	2023-03-12 22:23
whereis	30.77 KB	-rwxr-xr-x	2024-11-21 20:01
which	946 B	-rwxr-xr-x	2023-07-28 23:46
which.debianutils	946 B	-rwxr-xr-x	2023-07-28 23:46
whiptail	26.75 KB	-rwxr-xr-x	2023-01-31 14:53
who	59.02 KB	-rwxr-xr-x	2022-09-20 15:27
whoami	38.86 KB	-rwxr-xr-x	2022-09-20 15:27
write	22.31 KB	-rwxr-xr-x	2024-11-21 20:01
wsrep_sst_backup	2.39 KB	-rwxr-xr-x	2025-02-19 00:56
wsrep_sst_common	66.5 KB	-rwxr-xr-x	2025-02-19 00:56
wsrep_sst_mariabackup	49.21 KB	-rwxr-xr-x	2025-02-19 00:56
wsrep_sst_mysqldump	8.04 KB	-rwxr-xr-x	2025-02-19 00:56
wsrep_sst_rsync	29.7 KB	-rwxr-xr-x	2025-02-19 00:56
wsrep_sst_rsync_wan	29.7 KB	-rwxr-xr-x	2025-02-19 00:56
x86_64	26.58 KB	-rwxr-xr-x	2024-11-21 20:01
x86_64-linux-gnu-addr2line	23.14 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-ar	51.17 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-as	897.41 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-c++filt	18.51 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-cpp	1.24 MB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-cpp-12	1.24 MB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-dwp	1.79 MB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-elfedit	35.03 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-g++	1.25 MB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-g++-12	1.25 MB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcc	1.24 MB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcc-12	1.24 MB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcc-ar	34.54 KB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcc-ar-12	34.54 KB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcc-nm	34.54 KB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcc-nm-12	34.54 KB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcc-ranlib	34.54 KB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcc-ranlib-12	34.54 KB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcov	720.16 KB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcov-12	720.16 KB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcov-dump	568.02 KB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcov-dump-12	568.02 KB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcov-tool	588.09 KB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gcov-tool-12	588.09 KB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-gold	2.99 MB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-gp-archive	159.06 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-gp-collect-app	175.27 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-gp-display-html	578.29 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-gp-display-src	150.81 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-gp-display-text	257.3 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-gprof	108.35 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-gprofng	146.59 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-ld	1.27 MB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-ld.bfd	1.27 MB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-ld.gold	2.99 MB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-lto-dump	30.47 MB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-lto-dump-12	30.47 MB	-rwxr-xr-x	2023-01-08 09:12
x86_64-linux-gnu-nm	44.03 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-objcopy	155.66 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-objdump	362.56 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-pkg-config	44.04 KB	-rwxr-xr-x	2023-01-22 11:06
x86_64-linux-gnu-pkgconf	44.04 KB	-rwxr-xr-x	2023-01-22 11:06
x86_64-linux-gnu-python3-config	3 KB	-rwxr-xr-x	2024-11-30 21:22
x86_64-linux-gnu-python3.11-config	3 KB	-rwxr-xr-x	2024-11-30 21:22
x86_64-linux-gnu-ranlib	51.17 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-readelf	751.38 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-size	26.86 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-strings	30.98 KB	-rwxr-xr-x	2023-01-14 17:24
x86_64-linux-gnu-strip	155.7 KB	-rwxr-xr-x	2023-01-14 17:24
xargs	70.45 KB	-rwxr-xr-x	2023-01-08 18:07
xauth	51.5 KB	-rwxr-xr-x	2023-01-24 16:29
xdg-user-dir	234 B	-rwxr-xr-x	2022-09-26 14:37
xdg-user-dirs-update	26.16 KB	-rwxr-xr-x	2022-09-26 14:37
xgettext	292.78 KB	-rwxr-xr-x	2023-02-26 15:20
xsubpp	5.05 KB	-rwxr-xr-x	2023-11-25 20:59
xz	82.7 KB	-rwxr-xr-x	2025-04-03 19:55
xzcat	82.7 KB	-rwxr-xr-x	2025-04-03 19:55
xzcmp	7.25 KB	-rwxr-xr-x	2025-04-03 19:55
xzdiff	7.25 KB	-rwxr-xr-x	2025-04-03 19:55
xzegrep	10.09 KB	-rwxr-xr-x	2025-04-03 19:55
xzfgrep	10.09 KB	-rwxr-xr-x	2025-04-03 19:55
xzgrep	10.09 KB	-rwxr-xr-x	2025-04-03 19:55
xzless	1.77 KB	-rwxr-xr-x	2025-04-03 19:55
xzmore	2.14 KB	-rwxr-xr-x	2025-04-03 19:55
yes	38.83 KB	-rwxr-xr-x	2022-09-20 15:27
ypdomainname	22.15 KB	-rwxr-xr-x	2022-12-19 13:33
zcat	1.94 KB	-rwxr-xr-x	2022-04-10 02:22
zcmp	1.64 KB	-rwxr-xr-x	2022-04-10 02:22
zdiff	6.31 KB	-rwxr-xr-x	2022-04-10 02:22
zdump	22.52 KB	-rwxr-xr-x	2025-03-06 22:46
zegrep	29 B	-rwxr-xr-x	2022-04-10 02:22
zfgrep	29 B	-rwxr-xr-x	2022-04-10 02:22
zforce	2.03 KB	-rwxr-xr-x	2022-04-10 02:22
zgrep	7.91 KB	-rwxr-xr-x	2022-04-10 02:22
zip	212.27 KB	-rwxr-xr-x	2023-02-19 18:00
zipcloak	92.48 KB	-rwxr-xr-x	2023-02-19 18:00
zipdetails	68.55 KB	-rwxr-xr-x	2023-11-25 20:59
zipgrep	2.89 KB	-rwxr-xr-x	2023-02-19 18:02
zipinfo	175.05 KB	-rwxr-xr-x	2023-02-19 18:02
zipnote	84.16 KB	-rwxr-xr-x	2023-02-19 18:00
zipsplit	88.19 KB	-rwxr-xr-x	2023-02-19 18:00
zless	2.15 KB	-rwxr-xr-x	2022-04-10 02:22
zmore	1.8 KB	-rwxr-xr-x	2022-04-10 02:22
znew	4.47 KB	-rwxr-xr-x	2022-04-10 02:22
zstd	1.22 MB	-rwxr-xr-x	2023-03-18 20:58
zstdcat	1.22 MB	-rwxr-xr-x	2023-03-18 20:58
zstdgrep	3.78 KB	-rwxr-xr-x	2023-03-18 20:58
zstdless	197 B	-rwxr-xr-x	2023-03-18 20:58
zstdmt	1.22 MB	-rwxr-xr-x	2023-03-18 20:58

Rename

# Copyright (C) 2017-2024 MariaDB
# Copyright (C) 2012-2015 Codership Oy
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; see the file COPYING. If not, write to the
# Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston
# MA  02110-1335  USA.

# This is a common command line parser and common functions to
# be sourced by other SST scripts.

trap 'exit 32' HUP PIPE
trap 'exit 3'  INT QUIT TERM

OS="$(uname)"

# Setting the paths for some utilities on CentOS
export PATH="${PATH:+$PATH:}/usr/local/bin:/usr/local/sbin:/usr/bin:/bin:/usr/sbin:/sbin"
if [ "$OS" != 'Darwin' ]; then
    export LD_LIBRARY_PATH="${LD_LIBRARY_PATH:+$LD_LIBRARY_PATH:}/usr/local/lib:/usr/lib:/lib:/opt/lib"
fi

commandex()
{
    if [ -n "$BASH_VERSION" ]; then
        command -v "$1" || :
    elif [ -x "$1" ]; then
        echo "$1"
    else
        which "$1" || :
    fi
}

with_bash_42=0
with_printf=1
if [ -z "$BASH_VERSION" ]; then
    [ -z "$(commandex printf)" ] && with_printf=0
else
    [ "${BASH_VERSINFO[0]}" -eq 4 -a "${BASH_VERSINFO[1]}" -ge 2 -o \
      "${BASH_VERSINFO[0]}" -gt 4 ] && with_bash_42=1
fi

wsrep_log()
{
    local t
    # echo everything to stderr so that it gets into common error log
    # deliberately made to look different from the rest of the log
    if [ "$OS" = 'Linux' ]; then
        t=$(date '+%Y%m%d %H:%M:%S.%3N')
    elif [ $with_bash_42 -ne 0 ]; then
        printf -v t '%(%Y%m%d %H:%M:%S)T.000'
    else
        t=$(date '+%Y%m%d %H:%M:%S.000')
    fi
    echo "WSREP_SST: $* ($t)" >&2
}

wsrep_log_error()
{
    wsrep_log "[ERROR] $*"
}

wsrep_log_warning()
{
    wsrep_log "[WARNING] $*"
}

wsrep_log_info()
{
    wsrep_log "[INFO] $*"
}

trim_string()
{
    if [ -n "$BASH_VERSION" ]; then
        local pattern="[![:space:]${2:-}]"
        local x="${1#*$pattern}"
        local z=${#1}
        x=${#x}
        if [ $x -ne $z ]; then
            local y="${1%$pattern*}"
            y=${#y}
            x=$(( z-x-1 ))
            y=$(( y-x+1 ))
            echo "${1:$x:$y}"
        else
            echo ''
        fi
    else
        local pattern="[[:space:]${2:-}]"
        echo "$1" | sed -E "s/^$pattern+|$pattern+\$//g"
    fi
}

trim_dir()
{
    if [ -n "$BASH_VERSION" ]; then
        local pattern="![:space:]${2:-}"
        local x="${1#*[$pattern]}"
        local z=${#1}
        x=${#x}
        if [ $x -ne $z ]; then
            local y="${1%[$pattern/]*}"
            y=${#y}
            x=$(( z-x-1 ))
            y=$(( y-x+1 ))
            x="${1:$x:$y}"
            [ -z "$x" ] && x='.'
            echo "$x"
        else
            echo ''
        fi
    else
        local pattern="[:space:]${2:-}"
        local x=$(echo "$1" | sed -E "s/^[$pattern]+|[$pattern/]+\$//g")
        if [ -n "$x" ]; then
            echo "$x"
        elif "${1#*/}" != "$1"; then
            echo '.'
        else
            echo ''
        fi
    fi
}

trim_right()
{
    if [ -n "$BASH_VERSION" ]; then
        local pattern="[![:space:]${2:-}]"
        local z=${#1}
        local y="${1%$pattern*}"
        y=${#y}
        if [ $y -ne $z ]; then
            y=$(( y+1 ))
            echo "${1:0:$y}"
        else
            echo ''
        fi
    else
        local pattern="[[:space:]${2:-}]"
        echo "$1" | sed -E "s/$pattern+\$//g"
    fi
}

trim_left()
{
    if [ -n "$BASH_VERSION" ]; then
        local pattern="[![:space:]${2:-}]"
        local x="${1#*$pattern}"
        local z=${#1}
        x=${#x}
        if [ $x -ne $z ]; then
            x=$(( z-x-1 ))
            echo "${1:$x:$z}"
        else
            echo ''
        fi
    else
        local pattern="[[:space:]${2:-}]"
        echo "$1" | sed -E "s/^$pattern+//g"
    fi
}

to_minuses()
{
    local x="$1"
    local t="${1#*_}"
    local r=""
    while [ "$t" != "$x" ]; do
       r="$r${x%%_*}-"
       x="$t"
       t="${t#*_}"
    done
    echo "$r$x"
}

WSREP_SST_OPT_BYPASS=0
WSREP_SST_OPT_PROGRESS=0
WSREP_SST_OPT_BINLOG=""
WSREP_SST_OPT_BINLOG_INDEX=""
WSREP_SST_OPT_LOG_BASENAME=""
WSREP_SST_OPT_DATA=""
WSREP_SST_OPT_AUTH="${WSREP_SST_OPT_AUTH:-}"
WSREP_SST_OPT_USER="${WSREP_SST_OPT_USER:-}"
WSREP_SST_OPT_PSWD="${WSREP_SST_OPT_PSWD:-}"
WSREP_SST_OPT_DEFAULT=""
WSREP_SST_OPT_DEFAULTS=""
WSREP_SST_OPT_EXTRA_DEFAULT=""
WSREP_SST_OPT_EXTRA_DEFAULTS=""
WSREP_SST_OPT_SUFFIX_DEFAULT=""
WSREP_SST_OPT_SUFFIX_VALUE=""
WSREP_SST_OPT_MYSQLD=""
WSREP_SST_OPT_PORT=""
WSREP_SST_OPT_ADDR=""
WSREP_SST_OPT_ADDR_PORT=""
WSREP_SST_OPT_HOST=""
WSREP_SST_OPT_HOST_UNESCAPED=""
ARIA_LOG_DIR=""
INNODB_DATA_HOME_DIR=$(trim_dir "${INNODB_DATA_HOME_DIR:-}")
INNODB_LOG_GROUP_HOME=$(trim_dir "${INNODB_LOG_GROUP_HOME:-}")
INNODB_UNDO_DIR=$(trim_dir "${INNODB_UNDO_DIR:-}")
INNODB_BUFFER_POOL=""
INNODB_BUFFER_POOL_SIZE=""
INNODB_FORCE_RECOVERY=""
INNOEXTRA=""

while [ $# -gt 0 ]; do
case "$1" in
    '--address')
        WSREP_SST_OPT_ADDR=$(trim_string "$2")
        #
        # Break address string into host:port/path parts
        #
        case "$WSREP_SST_OPT_ADDR" in
        \[*)
            # IPv6
            # Remove the starting and ending square brackets, if present:
            addr="${WSREP_SST_OPT_ADDR#\[}"
            addr=$(trim_right "${addr%%\]*}")
            # Some utilities and subsequent code require an address
            # without square brackets:
            readonly WSREP_SST_OPT_HOST_UNESCAPED="$addr"
            # Square brackets are needed in most cases:
            readonly WSREP_SST_OPT_HOST="[$addr]"
            # Mark this address as IPv6:
            readonly WSREP_SST_OPT_HOST_IPv6=1
            # Let's remove the leading part that contains the host address:
            remain="${WSREP_SST_OPT_ADDR#*\]}"
            ;;
        *)
            addr=$(trim_right "${WSREP_SST_OPT_ADDR%%[:/]*}")
            readonly WSREP_SST_OPT_HOST="$addr"
            readonly WSREP_SST_OPT_HOST_UNESCAPED="$addr"
            readonly WSREP_SST_OPT_HOST_IPv6=0
            # Let's remove the leading part that contains the host address:
            remain="${WSREP_SST_OPT_ADDR#*[:/]}"
            ;;
        esac
        # If there is nothing but the address, then the remainder is empty:
        [ "$remain" = "$WSREP_SST_OPT_ADDR" ] && remain=""
        # Let's remove the ":" character that separates the port number
        # from the hostname:
        remain="${remain#:}"
        # Extract the port number from the address - all characters
        # up to "/" (if present):
        WSREP_SST_OPT_ADDR_PORT="${remain%%/*}"
        # If the "/" character is present, then the path is not empty:
        if [ "$WSREP_SST_OPT_ADDR_PORT" != "$remain" ]; then
            # This operation removes everything up to the "/" character,
            # effectively removing the port number from the string:
            readonly WSREP_SST_OPT_PATH="${remain#*/}"
        else
            readonly WSREP_SST_OPT_PATH=""
        fi
        WSREP_SST_OPT_ADDR_PORT=$(trim_right "$WSREP_SST_OPT_ADDR_PORT")
        # Remove the module name part from the string, which ends with "/":
        remain="${WSREP_SST_OPT_PATH#*/}"
        # This operation removes the tail after the very first occurrence
        # of the "/" character, inclusively:
        readonly WSREP_SST_OPT_MODULE=$(trim_right "${WSREP_SST_OPT_PATH%%/*}")
        # If there is one more "/" in the string, then everything before
        # it will be the LSN, otherwise the LSN is empty:
        if [ "$remain" != "$WSREP_SST_OPT_PATH" ]; then
            # Extract the part that matches the LSN by removing all
            # characters starting from the very first "/":
            readonly WSREP_SST_OPT_LSN=$(trim_right "${remain%%/*}")
            # Exctract everything after the first occurrence of
            # the "/" character in the string:
            source="$remain"
            remain="${remain#*/}"
            # If the remainder does not match the original string,
            # then there is something else (the version number in
            # our case):
            if [ "$remain" != "$source" ]; then
                # Let's extract the version number by removing the tail
                # after the very first occurence of the "/" character
                # (inclusively):
                readonly WSREP_SST_OPT_SST_VER=$(trim_right "${remain%%/*}")
            else
                readonly WSREP_SST_OPT_SST_VER=""
            fi
        else
            readonly WSREP_SST_OPT_LSN=""
            readonly WSREP_SST_OPT_SST_VER=""
        fi
        shift
        ;;
    '--bypass')
        readonly WSREP_SST_OPT_BYPASS=1
        ;;
    '--progress')
        readonly WSREP_SST_OPT_PROGRESS=$(( $2 ))
        shift
        ;;
    '--datadir')
        # Let's remove the trailing slash:
        readonly WSREP_SST_OPT_DATA=$(trim_dir "$2")
        shift
        ;;
    '--aria-log-dir-path')
        # Let's remove the trailing slash:
        readonly ARIA_LOG_DIR=$(trim_dir "$2")
        shift
        ;;
    '--innodb-data-home-dir')
        # Let's remove the trailing slash:
        readonly INNODB_DATA_HOME_DIR=$(trim_dir "$2")
        shift
        ;;
    '--innodb-log-group-home-dir')
        # Let's remove the trailing slash:
        readonly INNODB_LOG_GROUP_HOME=$(trim_dir "$2")
        shift
        ;;
    '--innodb-undo-directory')
        # Let's remove the trailing slash:
        readonly INNODB_UNDO_DIR=$(trim_dir "$2")
        shift
        ;;
    '--innodb-buffer-pool-filename')
        readonly INNODB_BUFFER_POOL=$(trim_string "$2")
        shift
        ;;
    '--innodb-buffer-pool-size')
        readonly INNODB_BUFFER_POOL_SIZE=$(trim_string "$2")
        shift
        ;;
    '--defaults-file')
        file=$(trim_string "$2")
        readonly WSREP_SST_OPT_DEFAULT="$1=$file"
        readonly WSREP_SST_OPT_DEFAULTS="$1='$file'"
        shift
        ;;
    '--defaults-extra-file')
        file=$(trim_string "$2")
        readonly WSREP_SST_OPT_EXTRA_DEFAULT="$1=$file"
        readonly WSREP_SST_OPT_EXTRA_DEFAULTS="$1='$file'"
        shift
        ;;
    '--defaults-group-suffix')
        suffix=$(trim_string "$2")
        readonly WSREP_SST_OPT_SUFFIX_DEFAULT="$1=$suffix"
        readonly WSREP_SST_OPT_SUFFIX_VALUE="$suffix"
        shift
        ;;
    '--host')
        addr=$(trim_string "$2")
        case "$addr" in
        \[*)
            # IPv6
            # Remove the starting and ending square brackets, if present:
            addr="${addr#\[}"
            addr=$(trim_right "${addr%%\]*}")
            # Some utilities and subsequent code require an address
            # without square brackets:
            readonly WSREP_SST_OPT_HOST_UNESCAPED="$addr"
            # Square brackets are needed in most cases:
            readonly WSREP_SST_OPT_HOST="[$addr]"
            # Mark this address as IPv6:
            readonly WSREP_SST_OPT_HOST_IPv6=1
            ;;
        *)
            readonly WSREP_SST_OPT_HOST="$addr"
            readonly WSREP_SST_OPT_HOST_UNESCAPED="$addr"
            readonly WSREP_SST_OPT_HOST_IPv6=0
            ;;
        esac
        WSREP_SST_OPT_ADDR="$addr"
        shift
        ;;
    '--local-port')
        readonly WSREP_SST_OPT_LPORT=$(( $2 ))
        shift
        ;;
    '--parent')
        readonly WSREP_SST_OPT_PARENT=$(( $2 ))
        shift
        ;;
    '--password')
        WSREP_SST_OPT_PSWD="$2"
        shift
        ;;
    '--port')
        readonly WSREP_SST_OPT_PORT=$(( $2 ))
        shift
        ;;
    '--role')
        readonly WSREP_SST_OPT_ROLE=$(trim_string "$2")
        shift
        ;;
    '--socket')
        readonly WSREP_SST_OPT_SOCKET=$(trim_string "$2")
        shift
        ;;
    '--user')
        WSREP_SST_OPT_USER="$2"
        shift
        ;;
    '--gtid')
        readonly WSREP_SST_OPT_GTID=$(trim_string "$2")
        shift
        ;;
    '--binlog'|'--log-bin')
        readonly WSREP_SST_OPT_BINLOG=$(trim_string "$2")
        shift
        ;;
    '--binlog-index'|'--log-bin-index')
        WSREP_SST_OPT_BINLOG_INDEX=$(trim_string "$2")
        shift
        ;;
    '--log-basename')
        readonly WSREP_SST_OPT_LOG_BASENAME=$(trim_string "$2")
        shift
        ;;
    '--gtid-domain-id')
        readonly WSREP_SST_OPT_GTID_DOMAIN_ID=$(trim_string "$2")
        shift
        ;;
    '--mysqld-args')
        original_cmd=""
        shift
        cmd_tail=0
        while [ $# -gt 0 ]; do
           lname="${1#--}"
           # "--" is interpreted as the end of the list of options:
           if [ -z "$lname" ]; then
               shift
               if [ $# -gt 0 ]; then
                   # copy "--" to the output string:
                   original_cmd="$original_cmd --"
                   # All other arguments must be copied unchanged:
                   while [ $# -gt 0 ]; do
                       original_cmd="$original_cmd '$1'"
                       shift
                   done
               fi
               break
           fi
           # Make sure the argument does not start with "--", otherwise it
           # is a long option, which is processed after this "if":
           if [ "$lname" = "$1" ]; then
               # Check if the argument is the short option or the short
               # options list, starting with "-":
               options="${1#-}"
               if [ "$options" != "$1" -a -n "$options" ]; then
                   slist=""
                   while [ -n "$options" ]; do
                       # Let's separate the first character as the current
                       # option name:
                       if [ -n "$BASH_VERSION" ]; then
                           option="${options:0:1}"
                       elif [ $with_printf -ne 0 ]; then
                           option=$(printf '%.1s' "$options")
                       else
                           # If it's not bash and without printf,
                           # then we need to use slow external utilities:
                           option=$(echo "$options" | cut -c1)
                       fi
                       # And the subsequent characters consider option value:
                       value=""
                       if [ ${#options} -gt 0 ]; then
                           value="${options#?}"
                       fi
                       # Check for options without argument:
                       if [ "$option" != '?' -a \
                            "$option" != 'a' -a \
                            "$option" != 's' -a \
                            "$option" != 'v' ]
                       then
                           # If the option value is absent, then check
                           # the following argument:
                           if [ -z "$value" -a $# -gt 1 ]; then
                               # if the next argument does not start with
                               # the "-" character, then next argument is
                               # the current option value:
                               if [ "${2#-}" = "$2" ]; then
                                   shift
                                   value="$1"
                               elif [ "$2" = '--' ]; then
                                   shift
                                   if [ $# -gt 1 ]; then
                                       cmd_tail=1
                                       shift
                                       value="$1"
                                   fi
                               fi
                           fi
                           if [ "$option" = 'h' ]; then
                               if [ -z "$WSREP_SST_OPT_DATA" ]; then
                                   MYSQLD_OPT_DATADIR=$(trim_dir "$value")
                               fi
                           elif [ "$option" != 'u' -a \
                                  "$option" != 'P' ]
                           then
                               if [ $cmd_tail -ne 0 ]; then
                                   option="$option --"
                               fi
                               if [ -z "$value" ]; then
                                   slist="$slist$option"
                               elif [ -z "$slist" ]; then
                                   slist="$option '$value'"
                               else
                                   slist="$slist -$option '$value'"
                               fi
                               break
                           fi
                           if [ $cmd_tail -ne 0 ]; then
                               if [ -n "$slist" ]; then
                                   slist="$slist --"
                               else
                                   slist='-'
                               fi
                           fi
                           break
                       else
                           slist="$slist$option"
                       fi
                       options="$value"
                   done
                   if [ -n "$slist" ]; then
                       original_cmd="$original_cmd -$slist"
                   fi
               elif [ -z "$options" ]; then
                   # We found an minus sign without any characters after it:
                   original_cmd="$original_cmd -"
               else
                   # We found a value that does not start with a minus -
                   # it is a positional argument or the value of previous
                   # option. Copy it to output string (as is):
                   original_cmd="$original_cmd '$1'"
               fi
               shift
               if [ $cmd_tail -ne 0 ]; then
                   # All other arguments must be copied unchanged:
                   while [ $# -gt 0 ]; do
                       original_cmd="$original_cmd '$1'"
                       shift
                   done
                   break
               fi
               continue
           fi
           # Now we are sure that we are working with an option
           # that has a "long" name, so remove all characters after
           # the first equal sign:
           option="${1%%=*}"
           # If the option name contains underscores, then replace
           # them to minuses:
           if [ "${option#*_}" != "$option" ]; then
               option=$(to_minuses "$option")
           fi
           # The "--loose-" prefix should not affect the recognition
           # of the option name:
           if [ "${option#--loose-}" != "$option" ]; then
               option="--${option#--loose-}"
           fi
           # Some options just need to be removed from the list:
           if [ "$option" != '--defaults-file' -a \
                "$option" != '--defaults-extra-file' -a \
                "$option" != '--defaults-group-suffix' -a \
                "$option" != '--user' -a \
                "$option" != '--port' -a \
                "$option" != '--socket' ]; then
               value="${1#*=}"
               if [ "$value" = "$1" ]; then
                   value=""
               fi
               # Let's fill in the variables containing important paths
               # that might not have been passed through explicit parameters
               # (+ removing the trailing slash in these paths). Many of these
               # options are processed internally within scripts or passed
               # explicitly to other programs, so we need to remove them
               # from mysqld's argument list:
               skip_mysqld_arg=0
               case "$option" in
                   '--aria-log-dir-path')
                       if [ -z "$ARIA_LOG_DIR" ]; then
                           MYSQLD_OPT_ARIA_LOG_DIR=$(trim_dir "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--innodb-data-home-dir')
                       if [ -z "$INNODB_DATA_HOME_DIR" ]; then
                           MYSQLD_OPT_INNODB_DATA_HOME_DIR=$(trim_dir "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--innodb-log-group-home-dir')
                       if [ -z "$INNODB_LOG_GROUP_HOME" ]; then
                           MYSQLD_OPT_INNODB_LOG_GROUP_HOME=$(trim_dir "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--innodb-undo-directory')
                       if [ -z "$INNODB_UNDO_DIR" ]; then
                           MYSQLD_OPT_INNODB_UNDO_DIR=$(trim_dir "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--innodb-buffer-pool-filename')
                       if [ -z "$INNODB_BUFFER_POOL" ]; then
                           MYSQLD_OPT_INNODB_BUFFER_POOL=$(trim_string "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--innodb-buffer-pool-size')
                       if [ -z "$INNODB_BUFFER_POOL_SIZE" ]; then
                           MYSQLD_OPT_INNODB_BUFFER_POOL_SIZE=$(trim_string "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--innodb-force-recovery')
                       if [ -n "$value" -a "$value" != "0" ]; then
                           INNODB_FORCE_RECOVERY=$(trim_string "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--log-bin')
                       if [ -z "$WSREP_SST_OPT_BINLOG" ]; then
                           MYSQLD_OPT_LOG_BIN=$(trim_string "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--log-bin-index')
                       if [ -z "$WSREP_SST_OPT_BINLOG_INDEX" ]; then
                           MYSQLD_OPT_LOG_BIN_INDEX=$(trim_string "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--log-basename')
                       if [ -z "$WSREP_SST_OPT_LOG_BASENAME" ]; then
                           MYSQLD_OPT_LOG_BASENAME=$(trim_string "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--datadir')
                       if [ -z "$WSREP_SST_OPT_DATA" ]; then
                           MYSQLD_OPT_DATADIR=$(trim_dir "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
               esac
               if [ $skip_mysqld_arg -eq 0 ]; then
                   original_cmd="$original_cmd '$1'"
               fi
           fi
           shift
        done
        WSREP_SST_OPT_MYSQLD="${original_cmd# *}"
        break
        ;;
    *) # Must be command usage
        # exit 1
        ;;
esac
shift
done

WSREP_TRANSFER_TYPE='SST'
[ $WSREP_SST_OPT_BYPASS -ne 0 ] && readonly WSREP_TRANSFER_TYPE='IST'
# Let's take the name of the current script as a base,
# removing the directory, extension and "wsrep_sst_" prefix:
WSREP_METHOD="${0##*/}"
WSREP_METHOD="${WSREP_METHOD%.*}"
readonly WSREP_METHOD="${WSREP_METHOD#wsrep_sst_}"
if [ -n "${WSREP_SST_OPT_ROLE+x}" ]; then
    if [ "$WSREP_SST_OPT_ROLE" != 'donor' -a \
         "$WSREP_SST_OPT_ROLE" != 'joiner' ]
    then
        wsrep_log_error "Unrecognized role: '$WSREP_SST_OPT_ROLE'"
        exit 22 # EINVAL
    fi
else
    readonly WSREP_SST_OPT_ROLE='donor'
fi

readonly WSREP_SST_OPT_PROGRESS

# The same argument can be present on the command line several
# times, in this case we must take its last value:
if [ -n "${MYSQLD_OPT_ARIA_LOG_DIR:-}" -a \
     -z "$ARIA_LOG_DIR" ]; then
    readonly ARIA_LOG_DIR="$MYSQLD_OPT_ARIA_LOG_DIR"
fi
if [ -n "${MYSQLD_OPT_INNODB_DATA_HOME_DIR:-}" -a \
     -z "$INNODB_DATA_HOME_DIR" ]; then
    readonly INNODB_DATA_HOME_DIR="$MYSQLD_OPT_INNODB_DATA_HOME_DIR"
fi
if [ -n "${MYSQLD_OPT_INNODB_LOG_GROUP_HOME:-}" -a \
     -z "$INNODB_LOG_GROUP_HOME" ]; then
    readonly INNODB_LOG_GROUP_HOME="$MYSQLD_OPT_INNODB_LOG_GROUP_HOME"
fi
if [ -n "${MYSQLD_OPT_INNODB_UNDO_DIR:-}" -a \
     -z "$INNODB_UNDO_DIR" ]; then
    readonly INNODB_UNDO_DIR="$MYSQLD_OPT_INNODB_UNDO_DIR"
fi
if [ -n "${MYSQLD_OPT_INNODB_BUFFER_POOL:-}" -a \
     -z "$INNODB_BUFFER_POOL" ]; then
    readonly INNODB_BUFFER_POOL="$MYSQLD_OPT_INNODB_BUFFER_POOL"
fi
if [ -n "${MYSQLD_OPT_INNODB_BUFFER_POOL_SIZE:-}" -a \
     -z "$INNODB_BUFFER_POOL_SIZE" ]; then
    readonly INNODB_BUFFER_POOL_SIZE="$MYSQLD_OPT_INNODB_BUFFER_POOL_SIZE"
fi
if [ -n "${MYSQLD_OPT_LOG_BIN:-}" -a \
     -z "$WSREP_SST_OPT_BINLOG" ]; then
    readonly WSREP_SST_OPT_BINLOG="$MYSQLD_OPT_LOG_BIN"
fi
if [ -n "${MYSQLD_OPT_LOG_BIN_INDEX:-}" -a \
     -z "$WSREP_SST_OPT_BINLOG_INDEX" ]; then
    WSREP_SST_OPT_BINLOG_INDEX="$MYSQLD_OPT_LOG_BIN_INDEX"
fi
if [ -n "${MYSQLD_OPT_DATADIR:-}" -a \
     -z "$WSREP_SST_OPT_DATA" ]; then
    readonly WSREP_SST_OPT_DATA="$MYSQLD_OPT_DATADIR"
fi
if [ -n "${MYSQLD_OPT_LOG_BASENAME:-}" -a \
     -z "$WSREP_SST_OPT_LOG_BASENAME" ]; then
    readonly WSREP_SST_OPT_LOG_BASENAME="$MYSQLD_OPT_LOG_BASENAME"
fi

# If the --log-bin option is present without a value, then
# set WSREP_SST_OPT_BINLOG value using other arguments:
if [ -z "$WSREP_SST_OPT_BINLOG" -a -n "${MYSQLD_OPT_LOG_BIN+x}" ]; then
    if [ -n "$WSREP_SST_OPT_LOG_BASENAME" ]; then
        # If the WSREP_SST_OPT_BINLOG variable is not set, but
        # --log-basename is present among the arguments to mysqld,
        # then set WSREP_SST_OPT_BINLOG equal to the base name
        # with the "-bin" suffix:
        readonly WSREP_SST_OPT_BINLOG="$WSREP_SST_OPT_LOG_BASENAME-bin"
    else
        # Take the default name:
        readonly WSREP_SST_OPT_BINLOG='mysql-bin'
    fi
fi

# Reconstructing the command line arguments that control the innodb
# and binlog options:
if [ -n "$WSREP_SST_OPT_LOG_BASENAME" ]; then
    if [ -n "$WSREP_SST_OPT_MYSQLD" ]; then
        WSREP_SST_OPT_MYSQLD="--log-basename='$WSREP_SST_OPT_LOG_BASENAME' $WSREP_SST_OPT_MYSQLD"
    else
        WSREP_SST_OPT_MYSQLD="--log-basename='$WSREP_SST_OPT_LOG_BASENAME'"
    fi
fi
if [ -n "$ARIA_LOG_DIR" ]; then
    INNOEXTRA="$INNOEXTRA --aria-log-dir-path='$ARIA_LOG_DIR'"
fi
if [ -n "$INNODB_DATA_HOME_DIR" ]; then
    INNOEXTRA="$INNOEXTRA --innodb-data-home-dir='$INNODB_DATA_HOME_DIR'"
fi
if [ -n "$INNODB_LOG_GROUP_HOME" ]; then
    INNOEXTRA="$INNOEXTRA --innodb-log-group-home-dir='$INNODB_LOG_GROUP_HOME'"
fi
if [ -n "$INNODB_UNDO_DIR" ]; then
    INNOEXTRA="$INNOEXTRA --innodb-undo-directory='$INNODB_UNDO_DIR'"
fi
if [ -n "$INNODB_BUFFER_POOL" ]; then
    INNOEXTRA="$INNOEXTRA --innodb-buffer-pool-filename='$INNODB_BUFFER_POOL'"
fi
if [ -n "$INNODB_BUFFER_POOL_SIZE" ]; then
    INNOEXTRA="$INNOEXTRA --innodb-buffer-pool-size='$INNODB_BUFFER_POOL_SIZE'"
fi
if [ -n "$WSREP_SST_OPT_BINLOG" ]; then
    INNOEXTRA="$INNOEXTRA --log-bin='$WSREP_SST_OPT_BINLOG'"
    if [ -n "$WSREP_SST_OPT_BINLOG_INDEX" ]; then
        if [ -n "$WSREP_SST_OPT_MYSQLD" ]; then
            WSREP_SST_OPT_MYSQLD="--log-bin-index='$WSREP_SST_OPT_BINLOG_INDEX' $WSREP_SST_OPT_MYSQLD"
        else
            WSREP_SST_OPT_MYSQLD="--log-bin-index='$WSREP_SST_OPT_BINLOG_INDEX'"
        fi
    fi
fi

readonly INNODB_FORCE_RECOVERY
readonly WSREP_SST_OPT_MYSQLD

get_binlog()
{
    # if no command line argument and WSREP_SST_OPT_BINLOG is not set,
    # try to get it from my.cnf:
    if [ -z "$WSREP_SST_OPT_BINLOG" ]; then
        WSREP_SST_OPT_BINLOG=$(parse_cnf '--mysqld' 'log-bin')
    fi
    # if no command line argument and WSREP_SST_OPT_BINLOG_INDEX is not set,
    # try to get it from my.cnf:
    if [ -z "$WSREP_SST_OPT_BINLOG_INDEX" ]; then
        WSREP_SST_OPT_BINLOG_INDEX=$(parse_cnf '--mysqld' 'log-bin-index')
    fi
    # if no command line argument and WSREP_SST_OPT_LOG_BASENAME is not set,
    # then try to get it from my.cnf:
    if [ -z "$WSREP_SST_OPT_LOG_BASENAME" ]; then
        WSREP_SST_OPT_LOG_BASENAME=$(parse_cnf '--mysqld' 'log-basename')
    fi
    if [ -z "$WSREP_SST_OPT_BINLOG" ]; then
        # If the log-bin option is specified without a parameter,
        # then we need to build the name of the index file according
        # to the rules described in the server documentation:
        if [ $(in_config '--mysqld' 'log-bin') -ne 0 ]; then
            if [ -n "$WSREP_SST_OPT_LOG_BASENAME" ]; then
                # If the WSREP_SST_OPT_BINLOG variable is not set, but
                # --log-basename is present among the arguments of mysqld,
                # then set WSREP_SST_OPT_BINLOG equal to the base name
                # with the "-bin" suffix:
                readonly WSREP_SST_OPT_BINLOG="$WSREP_SST_OPT_LOG_BASENAME-bin"
            else
                # Take the default name:
                readonly WSREP_SST_OPT_BINLOG='mysql-bin'
            fi
        fi
    fi
    if [ -n "$WSREP_SST_OPT_BINLOG" ]; then
        # If the name of the index file is not specified, then we will build
        # it according to the specifications for the server:
        if [ -z "$WSREP_SST_OPT_BINLOG_INDEX" ]; then
            if [ -n "$WSREP_SST_OPT_LOG_BASENAME" ]; then
                # If the WSREP_SST_OPT_BINLOG_INDEX variable is not set, but
                # --log-basename is present among the arguments of mysqld,
                # then set WSREP_SST_OPT_BINLOG_INDEX equal to the base name
                # with the "-bin" suffix:
                readonly WSREP_SST_OPT_BINLOG_INDEX="$WSREP_SST_OPT_LOG_BASENAME-bin.index"
            else
                # Use the default name (note that base of this name
                # is already defined above):
                readonly WSREP_SST_OPT_BINLOG_INDEX="$WSREP_SST_OPT_BINLOG.index"
            fi
        else
            # Remove all directories from the index file path:
            local filename="${WSREP_SST_OPT_BINLOG_INDEX##*/}"
            # Check if the index file name contains the extension:
            if [ "${filename%.*}" = "$filename" ]; then
                # Let's add the default extension (".index"):
                readonly WSREP_SST_OPT_BINLOG_INDEX="$WSREP_SST_OPT_BINLOG_INDEX.index"
            else
                readonly WSREP_SST_OPT_BINLOG_INDEX
            fi
        fi
    fi
}

# Check the presence of the port value and, if necessary, transfer
# the port number from the address to the WSREP_SST_OPT_PORT variable
# or vice versa, and also, if necessary, substitute the missing port
# value into the address value:
if [ -n "$WSREP_SST_OPT_ADDR_PORT" ]; then
    if [ -n "$WSREP_SST_OPT_PORT" ]; then
        if [ "$WSREP_SST_OPT_PORT" != "$WSREP_SST_OPT_ADDR_PORT" ]; then
            echo "WSREP_SST: [ERROR] port in --port=$WSREP_SST_OPT_PORT" \
                 "differs from port in --address=$WSREP_SST_OPT_ADDR" >&2
            exit 2
        fi
    else
        # If the address contains a port number, assign it to
        # the corresponding variable:
        readonly WSREP_SST_OPT_PORT="$WSREP_SST_OPT_ADDR_PORT"
    fi
else
    # If the port is missing, take the default port:
    if [ -z "$WSREP_SST_OPT_PORT" ]; then
        readonly WSREP_SST_OPT_PORT=4444
    fi
    WSREP_SST_OPT_ADDR_PORT="$WSREP_SST_OPT_PORT"
fi

# Let's construct a new value for the address with the port:
sst_path="${WSREP_SST_OPT_PATH:+/}$WSREP_SST_OPT_PATH"
WSREP_SST_OPT_ADDR="$WSREP_SST_OPT_HOST:$WSREP_SST_OPT_PORT$sst_path"

readonly WSREP_SST_OPT_ADDR
readonly WSREP_SST_OPT_ADDR_PORT

# try to use my_print_defaults, mysql and mysqldump that come
# with the sources (for MTR suite):
script_binary=$(dirname "$0")
SCRIPTS_DIR=$(cd "$script_binary"; pwd)
EXTRA_DIR="$SCRIPTS_DIR/../extra"

if [ -x "$SCRIPTS_DIR/my_print_defaults" ]; then
    MY_PRINT_DEFAULTS="$SCRIPTS_DIR/my_print_defaults"
elif [ -x "$EXTRA_DIR/my_print_defaults" ]; then
    MY_PRINT_DEFAULTS="$EXTRA_DIR/my_print_defaults"
else
    MY_PRINT_DEFAULTS=$(commandex 'my_print_defaults')
    if [ -z "$MY_PRINT_DEFAULTS" ]; then
        wsrep_log_error "my_print_defaults not found in path"
        exit 2
    fi
fi

readonly MY_PRINT_DEFAULTS

wsrep_defaults="$WSREP_SST_OPT_DEFAULTS"
wsrep_defaults="$wsrep_defaults${WSREP_SST_OPT_EXTRA_DEFAULTS:+ }$WSREP_SST_OPT_EXTRA_DEFAULTS"
wsrep_defaults="$wsrep_defaults${WSREP_SST_OPT_SUFFIX_DEFAULT:+ }$WSREP_SST_OPT_SUFFIX_DEFAULT"

readonly WSREP_SST_OPT_CONF="${wsrep_defaults:+ }$wsrep_defaults"

wsrep_defaults="$WSREP_SST_OPT_DEFAULT"
wsrep_defaults="$wsrep_defaults${WSREP_SST_OPT_EXTRA_DEFAULT:+ }$WSREP_SST_OPT_EXTRA_DEFAULT"
wsrep_defaults="$wsrep_defaults${WSREP_SST_OPT_SUFFIX_DEFAULT:+ }$WSREP_SST_OPT_SUFFIX_DEFAULT"

readonly WSREP_SST_OPT_CONF_UNQUOTED="${wsrep_defaults:+ }$wsrep_defaults"

#
# User can specify mariabackup specific settings that will be used during sst
# process like encryption, etc. Parse such configuration option.
#
# 1st parameter: group (config file section like sst) or
#                my_print_defaults argument (like --mysqld)
# 2nd parameter: var : name of the variable in the section, e.g. server-id
# 3rd parameter: default value for the parameter
#
parse_cnf()
{
    local groups="$1"
    local var="$2"
    local reval=""

# normalize the variable names specified in the .cnf file
    # (user can use '_' or '-', for example, log-bin or log_bin),
    # then search for the last instance of the desired variable
    # and finally get the value of that variable (if the variable
    # was specified several times - we use only its last instance):

local pattern='BEGIN {OFS=FS="="} {sub(/^--loose/,"-",$0); gsub(/_/,"-",$1); if ($1=="--'"$var"'") lastval=substr($0,length($1)+2)} END {print lastval}'

while [ -n "$groups" ]; do
        # Remove the largest suffix starting with the '|' character:
        local group="${groups%%\|*}"
        # Remove the remainder (the group name) from the rest
        # of the groups list (as if it were a prefix):
        if [ "$group" != "$groups" ]; then
            groups="${groups#*\|}"
        else
            groups=""
        fi
        # If the group name is the same as the "mysqld" without "--" prefix,
        # then try to use it together with the group suffix:
        if [ "$group" = 'mysqld' -a -n "$WSREP_SST_OPT_SUFFIX_VALUE" ]; then
            reval=$("$MY_PRINT_DEFAULTS" \
                    ${WSREP_SST_OPT_DEFAULT:+"$WSREP_SST_OPT_DEFAULT"} \
                    ${WSREP_SST_OPT_EXTRA_DEFAULT:+"$WSREP_SST_OPT_EXTRA_DEFAULT"} \
                    ${WSREP_SST_OPT_SUFFIX_DEFAULT:+"$WSREP_SST_OPT_SUFFIX_DEFAULT"} \
                    "mysqld$WSREP_SST_OPT_SUFFIX_VALUE" | awk "$pattern")
            if [ -n "$reval" ]; then
                break
            fi
        fi
        # Let's try to use the group name as it is:
        reval=$("$MY_PRINT_DEFAULTS" \
                ${WSREP_SST_OPT_DEFAULT:+"$WSREP_SST_OPT_DEFAULT"} \
                ${WSREP_SST_OPT_EXTRA_DEFAULT:+"$WSREP_SST_OPT_EXTRA_DEFAULT"} \
                ${WSREP_SST_OPT_SUFFIX_DEFAULT:+"$WSREP_SST_OPT_SUFFIX_DEFAULT"} \
                "$group" | awk "$pattern")
        if [ -n "$reval" ]; then
            break
        fi
    done

# Use default if we haven't found a value:
    [ -z "$reval" ] && reval="${3:-}"

# Truncate spaces:
    [ -n "$reval" ] && reval=$(trim_string "$reval")

echo "$reval"
}

#
# This function simply checks for the presence of the parameter
# in the config file, but does not return its value. It returns "1"
# (true) even if the parameter is present in the configuration file
# without a value:
#
in_config()
{
    local groups="$1"
    local var="$2"
    local found=0

# normalize the variable names specified in the .cnf file
    # (user can use '_' or '-', for example, log-bin or log_bin),
    # then search for the last instance(s) of the desired variable:

local pattern='BEGIN {OFS=FS="="; found=0} {sub(/^--loose/,"-",$0); gsub(/_/,"-",$1); if ($1=="--'"$var"'") found=1} END {print found}'

while [ -n "$groups" ]; do
        # Remove the largest suffix starting with the '|' character:
        local group="${groups%%\|*}"
        # Remove the remainder (the group name) from the rest
        # of the groups list (as if it were a prefix):
        if [ "$group" != "$groups" ]; then
            groups="${groups#*\|}"
        else
            groups=""
        fi
        # If the group name is the same as the "mysqld" without "--" prefix,
        # then try to use it together with the group suffix:
        if [ "$group" = 'mysqld' -a -n "$WSREP_SST_OPT_SUFFIX_VALUE" ]; then
            found=$("$MY_PRINT_DEFAULTS" \
                    ${WSREP_SST_OPT_DEFAULT:+"$WSREP_SST_OPT_DEFAULT"} \
                    ${WSREP_SST_OPT_EXTRA_DEFAULT:+"$WSREP_SST_OPT_EXTRA_DEFAULT"} \
                    ${WSREP_SST_OPT_SUFFIX_DEFAULT:+"$WSREP_SST_OPT_SUFFIX_DEFAULT"} \
                    "mysqld$WSREP_SST_OPT_SUFFIX_VALUE" | awk "$pattern")
            if [ $found -ne 0 ]; then
                break
            fi
        fi
        # Let's try to use the group name as it is:
        found=$($MY_PRINT_DEFAULTS \
                ${WSREP_SST_OPT_DEFAULT:+"$WSREP_SST_OPT_DEFAULT"} \
                ${WSREP_SST_OPT_EXTRA_DEFAULT:+"$WSREP_SST_OPT_EXTRA_DEFAULT"} \
                ${WSREP_SST_OPT_SUFFIX_DEFAULT:+"$WSREP_SST_OPT_SUFFIX_DEFAULT"} \
                "$group" | awk "$pattern")
        if [ $found -ne 0 ]; then
            break
        fi
    done

echo $found
}

# Get rid of incorrect values resulting from substitution
# in programs external to the script:
if [ "$WSREP_SST_OPT_USER" = '(null)' ]; then
    WSREP_SST_OPT_USER=""
fi
if [ "$WSREP_SST_OPT_PSWD" = '(null)' ]; then
    WSREP_SST_OPT_PSWD=""
fi
if [ "$WSREP_SST_OPT_AUTH" = '(null)' ]; then
    WSREP_SST_OPT_AUTH=""
fi

# Let's read the value of the authentication string from the
# configuration file so that it does not go to the command line
# and does not appear in the ps output:
if [ -z "$WSREP_SST_OPT_AUTH" ]; then
    WSREP_SST_OPT_AUTH=$(parse_cnf 'sst' 'wsrep-sst-auth')
fi

# Splitting WSREP_SST_OPT_AUTH as "user:password" pair:
if [ -n "$WSREP_SST_OPT_AUTH" ]; then
    # Extract username as shortest prefix up to first ':' character:
    WSREP_SST_OPT_AUTH_USER="${WSREP_SST_OPT_AUTH%%:*}"
    if [ -z "$WSREP_SST_OPT_USER" ]; then
        # if the username is not in the command line arguments,
        # set the username and password using WSREP_SST_OPT_AUTH
        # from the environment:
        WSREP_SST_OPT_USER="$WSREP_SST_OPT_AUTH_USER"
        WSREP_SST_OPT_PSWD="${WSREP_SST_OPT_AUTH#*:}"
    elif [ "$WSREP_SST_OPT_USER" = "$WSREP_SST_OPT_AUTH_USER" ]; then
        # If the username in the command line arguments and in
        # the environment variable are the same, set the password
        # if it was not specified in the command line:
        if [ -z "$WSREP_SST_OPT_PSWD" ]; then
            WSREP_SST_OPT_PSWD="${WSREP_SST_OPT_AUTH#*:}"
        fi
    else
        # The username is passed through the command line and does
        # not match the username in the environment variable - ignore
        # the environment and rebuild the authentication parameters:
        WSREP_SST_OPT_AUTH="$WSREP_SST_OPT_USER:$WSREP_SST_OPT_PSWD"
    fi
fi

WSREP_SST_OPT_REMOTE_AUTH="${WSREP_SST_OPT_REMOTE_AUTH:-}"
WSREP_SST_OPT_REMOTE_USER=
WSREP_SST_OPT_REMOTE_PSWD=
if [ -n "$WSREP_SST_OPT_REMOTE_AUTH" ]; then
    # Split auth string at the last ':'
    WSREP_SST_OPT_REMOTE_USER="${WSREP_SST_OPT_REMOTE_AUTH%%:*}"
    WSREP_SST_OPT_REMOTE_PSWD="${WSREP_SST_OPT_REMOTE_AUTH#*:}"
fi

readonly WSREP_SST_OPT_USER
readonly WSREP_SST_OPT_PSWD
readonly WSREP_SST_OPT_AUTH
readonly WSREP_SST_OPT_REMOTE_USER
readonly WSREP_SST_OPT_REMOTE_PSWD
readonly WSREP_SST_OPT_REMOTE_AUTH

if [ -n "$WSREP_SST_OPT_DATA" ]; then
    SST_PROGRESS_FILE="$WSREP_SST_OPT_DATA/sst_in_progress"
else
    SST_PROGRESS_FILE=""
fi

wsrep_cleanup_progress_file()
{
    if [ -n "$SST_PROGRESS_FILE" -a -f "$SST_PROGRESS_FILE" ]; then
        rm -f "$SST_PROGRESS_FILE" 2>/dev/null || :
    fi
}

wsrep_check_program()
{
    local prog="$1"
    local cmd=$(commandex "$prog")
    if [ -z "$cmd" ]; then
        wsrep_log_error "'$prog' not found in path"
        return 2 # no such file or directory
    fi
}

wsrep_check_programs()
{
    local ret=0
    while [ $# -gt 0 ]; do
        wsrep_check_program "$1" || ret=$?
        shift
    done
    return $ret
}

wsrep_check_datadir()
{
    if [ -z "$WSREP_SST_OPT_DATA" ]; then
        wsrep_log_error \
            "The '--datadir' parameter must be passed to the SST script"
        exit 2
    fi
}

get_openssl()
{
    # If the OPENSSL_BINARY variable is already defined, just return:
    if [ -n "${OPENSSL_BINARY+x}" ]; then
        return 0
    fi
    # Let's look for openssl:
    OPENSSL_BINARY=$(commandex 'openssl')
    if [ -z "$OPENSSL_BINARY" ]; then
        OPENSSL_BINARY='/usr/bin/openssl'
        if [ ! -x "$OPENSSL_BINARY" ]; then
            OPENSSL_BINARY=""
        fi
    fi
    readonly OPENSSL_BINARY
}

#
# Generate a string equivalent to 16 random bytes
#
wsrep_gen_secret()
{
    get_openssl
    if [ -n "$OPENSSL_BINARY" ]; then
        "$OPENSSL_BINARY" rand -hex 16
    elif [ -n "$BASH_VERSION" ]; then
        printf '%04x%04x%04x%04x%04x%04x%04x%04x' \
               $RANDOM $RANDOM $RANDOM $RANDOM \
               $RANDOM $RANDOM $RANDOM $RANDOM
    elif [ $with_printf -ne 0 -a -n "$(commandex cksum)" ]; then
        printf '%08x%08x%08x%08x' \
            $(head -8 /dev/urandom | cksum | cut -d ' ' -f1) \
            $(head -8 /dev/urandom | cksum | cut -d ' ' -f1) \
            $(head -8 /dev/urandom | cksum | cut -d ' ' -f1) \
            $(head -8 /dev/urandom | cksum | cut -d ' ' -f1)
    else
        wsrep_log_error "Unable to generate 16-byte secret"
        exit 22
    fi
}

#
# Checking if the address passed to us is local.
# If the second parameter is nonzero, then this function
# does not check for matches with local domain names:
#
is_local_ip()
{
    # Rapid recognition of the most common cases:
    [ "$1" = '127.0.0.1' -o \
      "$1" = '127.0.0.2' -o \
      "$1" = 'localhost' -o \
      "$1" = '::1' ] && return 0
    # If the address starts with "127." this is probably a local
    # address, but we need to clarify what follows this prefix:
    if [ "${1#127.}" != "$1" ]; then
        # All 127.0.0.0/8 addresses are local:
        if echo "$1" | grep -q -E '^127\.[0-9]+\.[0-9]+\.[0-9]+$'; then
            return 0
        fi
    fi
    # If the second parameter is nonzero, then we will skip
    # the domain name check:
    if [ "${2:-0}" -eq 0 ]; then
       # We consider all the names of a given host to be local addresses:
       [ "$1" = "$(hostname -s 2>/dev/null)" -o \
         "$1" = "$(hostname -f 2>/dev/null)" -o \
         "$1" = "$(hostname -d 2>/dev/null)" ] && return 0
    fi
    # If the address contains anything other than digits
    # and separators, it is not a local address:
    [ "${1#*[!0-9.]}" != "$1" ] && \
    [ "${1#*[!0-9A-Fa-f:\[\]]}" != "$1" ] && return 1
    # Now let's check if the given address is assigned to
    # one of the network cards:
    local ip_util=$(commandex 'ip')
    if [ -n "$ip_util" ]; then
        # ip address show ouput format is " inet[6] <address>/<mask>":
        "$ip_util" address show \
            | grep -o -E '^[[:space:]]*inet.?[[:space:]]+[^[:space:]]+/' \
            | grep -qw -F -- "$1/" && return 0
    else
        local ifconfig_util=$(commandex 'ifconfig')
        if [ -n "$ifconfig_util" ]; then
            # ifconfig output format is " inet[6] <address> ...":
            "$ifconfig_util" \
                | grep -o -E '^[[:space:]]*inet.?[[:space:]]+[^[:space:]]+' \
                | grep -qw -F -- "$1" && return 0
        fi
    fi
    return 1
}

check_sockets_utils()
{
    # The presence of any of these utilities is enough for us:
    lsof_available=0
    sockstat_available=0
    ss_available=0

socket_utility="$(commandex ss)"
    if [ -n "$socket_utility" ]; then
        socket_uname='ss'
        ss_available=1
        ss_opts='-nlp'
        # Let's check that ss has an option to skip headers:
        if $socket_utility -h 2>&1 | grep -qw -F -- '-H'; then
            ss_available=2
            ss_opts="${ss_opts}H"
        fi
    else
        socket_utility="$(commandex sockstat)"
        if [ -n "$socket_utility" ]; then
            socket_uname='sockstat'
            sockstat_available=1
            sockstat_opts='-p'
            if [ "$OS" = 'FreeBSD' ]; then
                # sockstat in FreeBSD is different from other systems,
                # let's denote it with a different value:
                sockstat_available=2
                sockstat_opts='-46lq -P tcp -p'
            fi
        else
            socket_utility="$(commandex lsof)"
            if [ -n "$socket_utility" ]; then
                socket_uname='lsof'
                lsof_available=1
                lsof_opts='-Pnl'
                # Let's check that lsof has an option to bypass blocking:
                if $socket_utility -h 2>&1 | grep -qw -F -- '-b'; then
                    lsof_available=2
                    lsof_opts="$lsof_opts -b -w"
                else
                    lsof_opts="$lsof_opts -S 10"
                fi
            else
                wsrep_log_error "Neither lsof, nor sockstat, nor ss tool" \
                                "were found in the path. Make sure you have" \
                                "at least one of them installed."
                exit 2 # ENOENT
            fi
        fi
    fi
    wsrep_log_info "'$socket_uname' is selected as a socket" \
                   "information utility."
}

#
# Check if the port is in the "listen" state.
# The first parameter is the PID of the process that should
# listen on the port - if it is not known, you can specify
# an empty string or zero.
# The second parameter is the port number.
# The third parameter is a list of the names of utilities
# (via "|") that can listen on this port during the state
# transfer.
#
check_port()
{
    local pid="${1:-0}"
    local port="$2"
    local utils="$3"

[ $pid -le 0 ] && pid='[0-9]+'

local rc=2 # ENOENT

if [ $ss_available -ne 0 ]; then
        $socket_utility $ss_opts -t "( sport = :$port )" 2>/dev/null | \
            grep -q -E "[[:space:]]users:[[:space:]]?\$.*\\(\"($utils)[^[:space:]]*\"[^)]*,pid=$pid(,[^)]*)?\$" && rc=0
    elif [ $sockstat_available -ne 0 ]; then
        if [ $sockstat_available -gt 1 ]; then
            # The sockstat command on FreeBSD does not return
            # the connection state without special option, but
            # it supports filtering by connection state:
            local out
            out=$($socket_utility $sockstat_opts "$port" 2>/dev/null) || rc=16 # EBUSY
            # On FreeBSD, the sockstat utility may exit without
            # any output due to locking issues in certain versions;
            # let's return a special exit code in such cases:
            if [ $rc -eq 16 -o -z "$out" ]; then
                return 16 # EBUSY
            fi
            echo "$out" | \
                grep -q -E "^[^[:space:]]+[[:space:]]+($utils)[^[:space:]]*[[:space:]]+$pid([[:space:]]|\$)" && rc=0
        else
            $socket_utility $sockstat_opts "$port" 2>/dev/null | \
                grep -q -E "^[^[:space:]]+[[:space:]]+($utils)[^[:space:]]*[[:space:]]+$pid([[:space:]].+)?[[:space:]]LISTEN([[:space:]]|\$)" && rc=0
        fi
    elif [ $lsof_available -ne 0 ]; then
        $socket_utility $lsof_opts -i ":$port" 2>/dev/null | \
            grep -q -E "^($utils)[^[:space:]]*[[:space:]]+$pid([[:space:]].+)?[[:space:]]\$LISTEN\$([[:space:]]|\$)" && rc=0
    else
        wsrep_log_error "Unknown sockets utility"
        exit 2 # ENOENT
    fi

return $rc
}

#
# If the ssl_dhparams variable is already set, uses that as a source
# of dh parameters for OpenSSL. Otherwise, looks for dhparams.pem in
# the datadir, and creates it there if it can't find the file.
#
check_for_dhparams()
{
    ssl_dhparams="$DATA/dhparams.pem"
    get_openssl
    if [ -n "$OPENSSL_BINARY" ]; then
        wsrep_log_info \
            "Could not find dhparams file, creating $ssl_dhparams"
        local bug=0
        local errmsg
        errmsg=$("$OPENSSL_BINARY" \
                 dhparam -out "$ssl_dhparams" -dsaparam 2048 2>&1) || bug=1
        if [ $bug -ne 0 ]; then
            wsrep_log_info "run: \"$OPENSSL_BINARY\" dhparam"\
                           "-out \"$ssl_dhparams\" -dsaparam 2048"
            wsrep_log_info "output: $errmsg"
            wsrep_log_error "******** ERROR *****************************************"
            wsrep_log_error "* Could not create the dhparams.pem file with OpenSSL. *"
            wsrep_log_error "********************************************************"
            ssl_dhparams=""
        fi
    else
        # Rollback: if openssl is not installed, then use
        # the default parameters:
        ssl_dhparams=""
    fi
}

#
# Verifies that the CA file verifies the certificate.
# Doing this here lets us generate better error messages.
#
# 1st param: path to the CA file.
# 2nd param: path to the certificate.
#
verify_ca_matches_cert()
{
    local cert="$1"
    local ca="$2"
    local cap="$3"

local readable=1; [ ! -r "$cert" ] && readable=0
         [ -n "$ca"  -a ! -r "$ca"   ] && readable=0
         [ -n "$cap" -a ! -r "$cap"  ] && readable=0

if [ $readable -eq 0 ]; then
        wsrep_log_error \
            "Both PEM file and CA file (or path) must be readable"
        exit 22
    fi

# If the openssl utility is not installed, then
    # we will not do this certificate check:
    get_openssl
    if [ -z "$OPENSSL_BINARY" ]; then
        wsrep_log_info "openssl utility not found"
        return
    fi

local not_match=0
    local errmsg
    errmsg=$("$OPENSSL_BINARY" verify -verbose \
                               ${ca:+ -CAfile} ${ca:+ "$ca"} \
                               ${cap:+ -CApath} ${cap:+ "$cap"} \
                               "$cert" 2>&1) || not_match=1

if [ $not_match -eq 1 ]; then
        wsrep_log_info "run: \"$OPENSSL_BINARY\" verify -verbose${ca:+ -CAfile \"$ca\"}${cap:+ -CApath \"$cap\"} \"$cert\""
        wsrep_log_info "output: $errmsg"
        wsrep_log_error "******** FATAL ERROR ********************************************"
        wsrep_log_error "* The certifcate and CA (certificate authority) do not match.   *"
        wsrep_log_error "* It does not appear that the certificate was issued by the CA. *"
        wsrep_log_error "* Please check your certificate and CA files.                   *"
        wsrep_log_error "*****************************************************************"
        exit 22
    fi
}

#
# Verifies that the certificate matches the private key.
# Doing this will save us having to wait for a timeout that would
# otherwise occur.
#
# 1st param: path to the certificate.
# 2nd param: path to the private key.
#
verify_cert_matches_key()
{
    local cert="$1"
    local key="$2"

if [ ! -r "$key" -o ! -r "$cert" ]; then
        wsrep_log_error "Both the certificate file and the key file" \
                        "must be readable"
        exit 22
    fi

# Generate the public key from the cert and the key.
    # They should match (otherwise we can't create an SSL connection).
    local pk1=$("$OPENSSL_BINARY" x509 -in "$cert" -pubkey -noout 2>/dev/null || :)
    local pk2=$("$OPENSSL_BINARY" pkey -in "$key" -pubout 2>/dev/null || :)
    if [ "$pk1" != "$pk2" ]; then
        wsrep_log_error "******************* FATAL ERROR *****************"
        wsrep_log_error "* The certificate and private key do not match. *"
        wsrep_log_error "* Please check your certificate and key files.  *"
        wsrep_log_error "*************************************************"
        exit 22
    fi
}

#
# Compares two version strings.
# The first parameter is the version to be checked;
# The second parameter is the minimum version required;
# Returns 1 (failure) if $1 >= $2, 0 (success) otherwise.
#
check_for_version()
{
    local y1="${1#*.}"
    [ "$y1" = "$1" ] && y1=""
    local z1="${y1#*.}"
    [ "$z1" = "$y1" ] && z1=""
    local w1="${z1#*.}"
    [ "$w1" = "$z1" ] && w1=""
    local x1="${1%%.*}"
    y1="${y1%%.*}"
    z1="${z1%%.*}"
    w1="${w1%%.*}"
    [ -z "$y1" ] && y1=0
    [ -z "$z1" ] && z1=0
    [ -z "$w1" ] && w1=0
    local y2="${2#*.}"
    [ "$y2" = "$2" ] && y2=""
    local z2="${y2#*.}"
    [ "$z2" = "$y2" ] && z2=""
    local w2="${z2#*.}"
    [ "$w2" = "$z2" ] && w2=""
    local x2="${2%%.*}"
    y2="${y2%%.*}"
    z2="${z2%%.*}"
    w2="${w2%%.*}"
    [ -z "$y2" ] && y2=0
    [ -z "$z2" ] && z2=0
    [ -z "$w2" ] && w2=0
    [ $x1 -lt $x2 ] && return 1
    [ $x1 -gt $x2 ] && return 0
    [ $y1 -lt $y2 ] && return 1
    [ $y1 -gt $y2 ] && return 0
    [ $z1 -lt $z2 ] && return 1
    [ $z1 -gt $z2 ] && return 0
    [ $w1 -lt $w2 ] && return 1
    return 0
}

#
# Check whether process is still running.
# The first parameter contains the name of the PID file.
# The second parameter is the flag of the need to delete
# the PID file.
# If the second parameter is not zero and not empty,
# then if the process terminates, the corresponding
# PID file will be deleted.
# This function also sets the CHECK_PID variable to zero
# if the process has already exited, or writes the PID
# of the process there if it is still running.
#
check_pid()
{
    local pid_file="$1"
    if [ -r "$pid_file" ]; then
        local pid=$(cat "$pid_file" 2>/dev/null || :)
        if [ -n "$pid" ]; then
            if [ $pid -gt 0 ]; then
                if ps -p $pid >/dev/null 2>&1; then
                    CHECK_PID=$pid
                    return 0
                fi
            fi
        fi
        local remove=${2:-0}
        if [ $remove -ne 0 ]; then
            rm -f "$pid_file" || :
        fi
    fi
    local config="${3:-}"
    if [ -n "$config" -a -f "$config" ]; then
        rm -f "$config" || :
    fi
    CHECK_PID=0
    return 1
}

#
# Checking that the process with the specified PID is still
# running and killing it in this case by sending SIGTERM
# (using the "kill" operation).
# The first parameter contains PID of the process.
# The second and third parameters (both optional) are the names
# of the PID and the configuration files, which should be removed
# after the process ends.
# If the first parameter (PID of the process) is zero, then
# the function immediately deletes the PID and the configuration
# files (if specified), without any additional checks.
#
cleanup_pid()
{
    local pid=$1
    local pid_file="${2:-}"
    local config="${3:-}"

if [ $pid -gt 0 ]; then
        if ps -p $pid >/dev/null 2>&1; then
            if kill $pid >/dev/null 2>&1; then
                sleep 0.5
                local round=0
                local force=0
                while ps -p $pid >/dev/null 2>&1; do
                    sleep 1
                    round=$(( round+1 ))
                    if [ $round -eq 16 ]; then
                        if [ $force -eq 0 ]; then
                            round=8
                            force=1
                            kill -9 $pid >/dev/null 2>&1 || :
                            sleep 0.5
                        else
                            return 1
                        fi
                    fi
                done
            elif ps -p $pid >/dev/null 2>&1; then
                wsrep_log_warning "Unable to kill PID=$pid${pid_file:+ ($pid_file)}"
                return 1
            fi
        fi
    fi

[ -n "$pid_file" -a -f "$pid_file" ] && rm -f "$pid_file" || :
    [ -n "$config" -a -f "$config" ] && rm -f "$config" || :

return 0
}

nproc=""

get_proc()
{
    if [ -z "$nproc" ]; then
        set +e
        if [ "$OS" = 'Linux' ]; then
            nproc=$(grep -cw -E '^processor' /proc/cpuinfo 2>/dev/null || :)
        elif [ "$OS" = 'Darwin' -o "$OS" = 'FreeBSD' ]; then
            nproc=$(sysctl -n hw.ncpu)
        fi
        set -e
        if [ -z "$nproc" ] || [ $nproc -eq 0 ]; then
            nproc=1
        fi
    fi
}

check_server_ssl_config()
{
    # backward-compatible behavior:
    tcert=$(parse_cnf 'sst' 'tca')
    tcap=$(parse_cnf 'sst' 'tcapath')
    tpem=$(parse_cnf 'sst' 'tcert')
    tkey=$(parse_cnf 'sst' 'tkey')
    # reading new ssl configuration options:
    local tcert2=$(parse_cnf "$encgroups" 'ssl-ca')
    local tcap2=$(parse_cnf "$encgroups" 'ssl-capath')
    local tpem2=$(parse_cnf "$encgroups" 'ssl-cert')
    local tkey2=$(parse_cnf "$encgroups" 'ssl-key')
    # if there are no old options, then we take new ones:
    if [ -z "$tcert" -a -z "$tcap" -a -z "$tpem" -a -z "$tkey" ]; then
        tcert="$tcert2"
        tcap="$tcap2"
        tpem="$tpem2"
        tkey="$tkey2"
    # checking for presence of the new-style SSL configuration:
    elif [ -n "$tcert2" -o -n "$tcap2" -o -n "$tpem2" -o -n "$tkey2" ]; then
        if [ "$tcert" != "$tcert2" -o \
             "$tcap"  != "$tcap2"  -o \
             "$tpem"  != "$tpem2"  -o \
             "$tkey"  != "$tkey2" ]
        then
            wsrep_log_info \
               "new ssl configuration options (ssl-ca[path], ssl-cert" \
               "and ssl-key) are ignored by SST due to presence" \
               "of the tca[path], tcert and/or tkey in the [sst] section"
        fi
    fi
    if [ -n "$tcert" ]; then
        if [ "${tcert%/}" != "$tcert" -o -d "$tcert" ]; then
            tcap="$tcert"
            tcert=""
        fi
    fi
}

# Get Common Name (CN) from the certificate:
openssl_getCN()
{
    get_openssl
    if [ -z "$OPENSSL_BINARY" ]; then
        wsrep_log_error \
            'openssl not found but it is required for authentication'
        exit 42
    fi

local bug=0
    local CN=$("$OPENSSL_BINARY" x509 -noout -subject -in "$1" 2>&1) || bug=1

if [ $bug -ne 0 ]; then
        wsrep_log_info "run: \"$OPENSSL_BINARY\" x509 -noout -subject -in \"$1\""
        wsrep_log_info "output: $CN"
        wsrep_log_error "******** FATAL ERROR **********************************************"
        wsrep_log_error "* Unable to parse the certificate file to obtain the common name. *"
        wsrep_log_error "*******************************************************************"
        exit 22
    fi

CN=$(trim_string "$CN")

if [ -n "$CN" ]; then
        # If the string begins with the "subject" prefix
        # then we need to remove it:
        local saved="$CN"
        local remain="${CN#subject}"
        if [ "$remain" != "$saved" ]; then
            remain=$(trim_left "$remain")
            # Now let's check for the presence of "=" character
            # after the "subject":
            saved="$remain"
            remain="${remain#=}"
            if [ "$remain" != "$saved" ]; then
                remain=$(trim_left "$remain")
            else
                remain=""
                bug=1
            fi
        fi
        while [ -n "$remain" ]; do
            local value=""
            # Let's extract the option name - all characters
            # up to the first '=' or ',' character (if present):
            local option="${remain%%[=,]*}"
            if [ "$option" != "$remain" ]; then
                option=$(trim_right "$option")
                # These variables will be needed to determine
                # which separator comes first:
                local x="${remain#*=}"
                local y="${remain#*,}"
                local z=${#remain}
                x=${#x}; [ $x -eq $z ] && x=0
                y=${#y}; [ $y -eq $z ] && y=0
                # The remaining string is everything that follows
                # the separator character:
                remain=$(trim_left "${remain#*[=,]}")
                # Let's check what we are dealing with - an equal
                # sign or a comma?
                if [ $x -gt $y ]; then
                    # If the remainder begins with a double quote,
                    # then there is a string containing commas and
                    # we need to parse it:
                    saved="$remain"
                    remain="${remain#\"}"
                    if [ "$remain" != "$saved" ]; then
                        while :; do
                            # We need to find the closing quote:
                            local prefix="$remain"
                            remain="${remain#*\"}"
                            # Let's check if there is a closing quote?
                            if [ "$remain" = "$prefix" ]; then
                                bug=1
                                break
                            fi
                            # Everything up to the closing quote is
                            # the next part of the value:
                            value="$value${prefix%%\"*}"
                            # But if the last character of the value
                            # is a backslash, then it is a quoted quotation
                            # mark and we need to add it to the value:
                            if [ "${value%\\}" != "$value" ]; then
                                value="$value\""
                            else
                                break
                            fi
                        done
                        [ $bug -ne 0 ] && break
                        # Now we have to remove "," if it is present
                        # in the string after the value:
                        saved=$(trim_left "$remain")
                        remain="${saved#,}"
                        if [ "$remain" != "$saved" ]; then
                            remain=$(trim_left "$remain")
                        elif [ -n "$remain" ]; then
                            bug=1
                            break
                        fi
                    else
                        # We are dealing with a simple unquoted string value,
                        # therefore we need to take everything up to the end
                        # of the string, or up to the next comma character:
                        value="${remain%%,*}"
                        if [ "$value" != "$remain" ]; then
                            remain=$(trim_left "${remain#*,}")
                        else
                            remain=""
                        fi
                        value=$(trim_right "$value")
                    fi
                    if [ "$option" = 'CN' -a -n "$value" ]; then
                        echo "$value"
                        return
                    fi
                fi
            else
                remain=""
            fi
        done
    fi

if [ $bug -ne 0 ]; then
        wsrep_log_error "******** FATAL ERROR **********************************************"
        wsrep_log_error "* Unable to parse the certificate options: '$CN'"
        wsrep_log_error "*******************************************************************"
        exit 22
    fi

echo ''
}

simple_cleanup()
{
    # Since this is invoked just after exit NNN
    local estatus=$?
    if [ $estatus -ne 0 ]; then
        wsrep_log_error "Cleanup after exit with status: $estatus"
    fi
    if [ -n "$SST_PID" ]; then
        [ "$(pwd)" != "$OLD_PWD" ] && cd "$OLD_PWD"
        [ -f "$SST_PID" ] && rm -f "$SST_PID" || :
    fi
    exit $estatus
}

create_data()
{
    OLD_PWD="$(pwd)"
    DATA_DIR="$OLD_PWD"

if [ -n "$DATA" -a "$DATA" != '.' ]; then
        [ ! -d "$DATA" ] && mkdir -p "$DATA"
        cd "$DATA"
        DATA_DIR="$(pwd)"
        cd "$OLD_PWD"
    fi
}

create_dirs()
{
    local simplify=${1:-0}

# if no command line argument and INNODB_DATA_HOME_DIR environment
    # variable is not set, try to get it from the my.cnf:
    if [ -z "$INNODB_DATA_HOME_DIR" ]; then
        INNODB_DATA_HOME_DIR=$(parse_cnf '--mysqld' 'innodb-data-home-dir')
        INNODB_DATA_HOME_DIR=$(trim_dir "$INNODB_DATA_HOME_DIR")
    fi

if [ -n "$INNODB_DATA_HOME_DIR" -a "$INNODB_DATA_HOME_DIR" != '.' -a \
         "$INNODB_DATA_HOME_DIR" != "$DATA_DIR" ]
    then
        # handle both relative and absolute paths:
        cd "$DATA"
        [ ! -d "$INNODB_DATA_HOME_DIR" ] && mkdir -p "$INNODB_DATA_HOME_DIR"
        cd "$INNODB_DATA_HOME_DIR"
        ib_home_dir="$(pwd)"
        cd "$OLD_PWD"
        [ $simplify -ne 0 -a "$ib_home_dir" = "$DATA_DIR" ] && ib_home_dir=""
    fi

# if no command line argument and INNODB_LOG_GROUP_HOME is not set,
    # then try to get it from the my.cnf:
    if [ -z "$INNODB_LOG_GROUP_HOME" ]; then
        INNODB_LOG_GROUP_HOME=$(parse_cnf '--mysqld' 'innodb-log-group-home-dir')
        INNODB_LOG_GROUP_HOME=$(trim_dir "$INNODB_LOG_GROUP_HOME")
    fi

if [ -n "$INNODB_LOG_GROUP_HOME" -a "$INNODB_LOG_GROUP_HOME" != '.' -a \
         "$INNODB_LOG_GROUP_HOME" != "$DATA_DIR" ]
    then
        # handle both relative and absolute paths:
        cd "$DATA"
        [ ! -d "$INNODB_LOG_GROUP_HOME" ] && mkdir -p "$INNODB_LOG_GROUP_HOME"
        cd "$INNODB_LOG_GROUP_HOME"
        ib_log_dir="$(pwd)"
        cd "$OLD_PWD"
        [ $simplify -ne 0 -a "$ib_log_dir" = "$DATA_DIR" ] && ib_log_dir=""
    fi

# if no command line argument and INNODB_UNDO_DIR is not set,
    # then try to get it from the my.cnf:
    if [ -z "$INNODB_UNDO_DIR" ]; then
        INNODB_UNDO_DIR=$(parse_cnf '--mysqld' 'innodb-undo-directory')
        INNODB_UNDO_DIR=$(trim_dir "$INNODB_UNDO_DIR")
    fi

if [ -n "$INNODB_UNDO_DIR" -a "$INNODB_UNDO_DIR" != '.' -a \
         "$INNODB_UNDO_DIR" != "$DATA_DIR" ]
    then
        # handle both relative and absolute paths:
        cd "$DATA"
        [ ! -d "$INNODB_UNDO_DIR" ] && mkdir -p "$INNODB_UNDO_DIR"
        cd "$INNODB_UNDO_DIR"
        ib_undo_dir="$(pwd)"
        cd "$OLD_PWD"
        [ $simplify -ne 0 -a "$ib_undo_dir" = "$DATA_DIR" ] && ib_undo_dir=""
    fi

# if no command line argument then try to get it from the my.cnf:
    if [ -z "$ARIA_LOG_DIR" ]; then
        ARIA_LOG_DIR=$(parse_cnf '--mysqld' 'aria-log-dir-path')
        ARIA_LOG_DIR=$(trim_dir "$ARIA_LOG_DIR")
    fi

if [ -n "$ARIA_LOG_DIR" -a "$ARIA_LOG_DIR" != '.' -a \
         "$ARIA_LOG_DIR" != "$DATA_DIR" ]
    then
        # handle both relative and absolute paths:
        cd "$DATA"
        [ ! -d "$ARIA_LOG_DIR" ] && mkdir -p "$ARIA_LOG_DIR"
        cd "$ARIA_LOG_DIR"
        ar_log_dir="$(pwd)"
        cd "$OLD_PWD"
        [ $simplify -ne 0 -a "$ar_log_dir" = "$DATA_DIR" ] && ar_log_dir=""
    fi

return 0
}

wait_previous_sst()
{
    # give some time for previous SST to complete:
    check_round=0
    while check_pid "$SST_PID" 1; do
        wsrep_log_info "Previous SST is not completed, waiting for it to exit"
        check_round=$(( check_round+1 ))
        if [ $check_round -eq 30 ]; then
            wsrep_log_error "previous SST script still running..."
            exit 114 # EALREADY
        fi
        sleep 1
    done

trap simple_cleanup EXIT
    echo $$ > "$SST_PID"
}

DATA="$WSREP_SST_OPT_DATA"

wsrep_check_datadir
create_data

SST_PID="$DATA/wsrep_sst.pid"

wsrep_log_info "$WSREP_METHOD $WSREP_TRANSFER_TYPE started on $WSREP_SST_OPT_ROLE"